Class 10 Science Chapter 2 Acids, Bases and Salts Important Questions with Answers in English

Exam-useful questions from this chapter, grouped by marks, each with a full model answer. Try writing the answer yourself first, then check it against this one.

1 1-Mark Questions

Question 1 (1 mark)

Q. What ions do acids release in water?

Answer: Acids release hydrogen ions, H⁺(aq), in water.

Question 2 (1 mark)

Q. What ions do bases release in water?

Answer: Bases release hydroxide ions, OH⁻(aq), in water.

Question 3 (1 mark)

Q. Name the gas evolved when zinc reacts with dilute sulphuric acid.

Answer: Hydrogen gas, H₂, is evolved.

Question 4 (1 mark)

Q. What is the common name of Ca(ClO)₂?

Answer: It is commonly called bleaching powder.

Question 5 (1 mark)

Q. What is a neutral solution’s pH value?

Answer: A neutral solution has a pH of exactly 7.

Question 6 (1 mark)

Q. Name the natural indicator whose colour is affected by acid or base and is extracted from lichen.

Answer: Litmus, a purple dye extracted from lichen.

Question 7 (1 mark)

Q. What is the chemical name of washing soda?

Answer: Sodium carbonate decahydrate, Na₂CO₃·10H₂O.

Question 8 (1 mark)

Q. What is an alkali?

Answer: An alkali is a base that dissolves in water.

Question 9 (1 mark)

Q. Name the acid present in an ant’s sting.

Answer: Methanoic acid.

Question 10 (1 mark)

Q. What is the chemical formula of Plaster of Paris?

Answer: CaSO₄·½H₂O (calcium sulphate hemihydrate).

2 2-Mark Questions

Question 1 (2 marks)

Q. Why does dry HCl gas not turn dry litmus paper red, while HCl solution does?

Answer: Hydrogen ions form only in the presence of water: HCl(g) + H₂O → H₃O⁺ + Cl⁻. With no water present, dry HCl gas cannot ionise to release H⁺, so it has no acidic effect on dry litmus.

Question 2 (2 marks)

Q. Write the equation for the reaction of zinc with sodium hydroxide, and name the product formed.

Answer: 2NaOH(aq) + Zn(s) → Na₂ZnO₂(s) + H₂(g). The product formed alongside hydrogen gas is sodium zincate.

Question 3 (2 marks)

Q. Why should concentrated acid always be added to water and never the reverse?

Answer: Dissolving a concentrated acid in water is highly exothermic. Adding water to the acid lets the heat generated boil the mixture suddenly, splashing acid out and causing burns, and the container can even crack from local heating.

Question 4 (2 marks)

Q. Give the equation for the reaction between calcium hydroxide (lime water) and carbon dioxide, and state what is observed.

Answer: Ca(OH)₂(aq) + CO₂(g) → CaCO₃(s) + H₂O(l). The white precipitate of CaCO₃ formed turns the lime water milky.

Question 5 (2 marks)

Q. What happens when excess carbon dioxide is passed through lime water? Give the equation.

Answer: The milkiness disappears because the insoluble CaCO₃ converts to soluble calcium bicarbonate: CaCO₃(s) + H₂O(l) + CO₂(g) → Ca(HCO₃)₂(aq).

Question 6 (2 marks)

Q. Distinguish between a strong acid and a weak acid using the idea of H⁺ ions.

Answer: At the same concentration, a strong acid produces a larger amount of H⁺ ions, while a weak acid produces a smaller amount. Both are still acids; the difference is only in how much they ionise.

Question 7 (2 marks)

Q. Why are metallic oxides called basic oxides?

Answer: Metallic oxides react with acids to form a salt and water, exactly the way a base reacts with an acid (e.g. CuO + 2HCl → CuCl₂ + H₂O). Because they behave like bases towards acids, they are classified as basic oxides.

Question 8 (2 marks)

Q. State two uses of washing soda.

Answer: (i) Used in the glass, soap and paper industries. (ii) Used for removing the permanent hardness of water.

Question 9 (2 marks)

Q. Why is Plaster of Paris stored in a moisture-proof container?

Answer: Moisture in the air is enough to slowly convert Plaster of Paris back into gypsum by reacting with the water vapour, which hardens the material inside its own container and makes it useless.

3 4-Mark Questions

Question 1 (4 marks)

Q. Describe an activity to show that compounds like glucose and alcohol, though they contain hydrogen, are not acids.

Answer: Set up two nails fixed on a cork placed in a beaker, connected to a 6-volt battery through a bulb and a switch. Pour dilute HCl into the beaker and switch on the current: the bulb glows, showing the solution conducts electricity. Repeat with dilute H₂SO₄: the bulb glows again. Now repeat separately with glucose solution and then alcohol solution: in both cases the bulb does not glow. Since glucose and alcohol also contain hydrogen but do not make the bulb glow, hydrogen alone is not what makes a compound acidic; what matters is whether the compound ionises in water to release H⁺ ions, which glucose and alcohol do not do.

Question 2 (4 marks)

Q. Explain, with equations, how the three products of the chlor-alkali process are obtained, and state one use of each.

Answer: Passing electricity through brine (aqueous NaCl) gives: 2NaCl(aq) + 2H₂O(l) → 2NaOH(aq) + Cl₂(g) + H₂(g). Chlorine gas collects at the anode, hydrogen gas at the cathode, and sodium hydroxide solution forms near the cathode. Uses: NaOH is used to make soap and detergents; Cl₂ is used to disinfect drinking water; H₂ is used as a fuel.

Question 3 (4 marks)

Q. Explain how baking soda is manufactured from common salt, and give two of its uses.

Answer: Common salt is used as a raw material: NaCl + H₂O + CO₂ + NH₃ → NH₄Cl + NaHCO₃. The sodium hydrogencarbonate produced is baking soda. Uses: (i) it is an ingredient in baking powder (with tartaric acid), releasing CO₂ that makes cakes and bread rise and turn soft and spongy; (ii) it is used as an antacid, neutralising excess acid in the stomach.

Question 4 (4 marks)

Q. Explain what is meant by water of crystallisation, and describe an activity that demonstrates it.

Answer: Water of crystallisation is the fixed number of water molecules present in one formula unit of a salt. Heating blue copper sulphate crystals in a dry test tube drives off this water: water droplets appear inside the tube, and the crystal, which was CuSO₄·5H₂O, turns white as it becomes anhydrous CuSO₄. Adding a few drops of water back to the white powder restores the blue colour, showing that the water was chemically part of the crystal, not just surface moisture.

Question 5 (4 marks)

Q. Explain, with equations, how Plaster of Paris is made and how it sets when mixed with water.

Answer: Heating gypsum (CaSO₄·2H₂O) at 373 K drives off some of its water of crystallisation, leaving calcium sulphate hemihydrate: CaSO₄·2H₂O →(373K) CaSO₄·½H₂O + 1½H₂O. This is Plaster of Paris. When mixed with water, it reabsorbs water and reverts to gypsum, forming a hard solid mass: CaSO₄·½H₂O + 1½H₂O → CaSO₄·2H₂O. This setting reaction is why it is used to plaster fractured bones.

4 6-Mark Questions

Question 1 (6 marks)

Q. Describe, with all the relevant equations, what happens when an acid reacts with (a) a metal, (b) a metal carbonate, and (c) a metal oxide. In each case, name the general rule.

Answer: (a) An acid reacting with an active metal releases hydrogen gas and forms a salt: Acid + Metal → Salt + Hydrogen. Example: H₂SO₄ + Zn → ZnSO₄ + H₂↑, confirmed by the pop sound when a burning candle is brought near the gas. (b) An acid reacting with a metal carbonate or hydrogencarbonate gives a salt, water and carbon dioxide: Metal carbonate/hydrogencarbonate + Acid → Salt + CO₂ + Water. Example: Na₂CO₃ + 2HCl → 2NaCl + H₂O + CO₂↑, and the CO₂ can be confirmed by turning lime water milky: Ca(OH)₂ + CO₂ → CaCO₃↓ + H₂O. (c) An acid reacting with a metal oxide gives a salt and water, just as with a base: Metal oxide + Acid → Salt + Water. Example: CuO + 2HCl → CuCl₂ + H₂O, seen from the black oxide dissolving to give a blue-green solution. This last reaction is exactly why metallic oxides are classified as basic oxides.

Question 2 (6 marks)

Q. Explain what the pH scale measures, and describe its importance in at least three areas of everyday life, using facts and figures given in the chapter.

Answer: The pH scale measures the concentration of hydrogen ions in a solution, on a scale from 0 (very acidic) to 14 (very alkaline), where the letter ‘p’ comes from the German ‘potenz’ (power). A solution is acidic below pH 7, neutral at pH 7, and basic above pH 7; a higher concentration of H₃O⁺ ions means a lower pH. Importance in daily life: (i) Digestion: the stomach produces hydrochloric acid to digest food; when too much acid causes indigestion, an antacid such as Milk of magnesia [Mg(OH)₂], a mild base, is used to neutralise the excess acid. (ii) Tooth decay: tooth enamel, made of calcium hydroxyapatite, is the hardest substance in the body but is corroded once the pH inside the mouth falls below 5.5, caused by acids bacteria produce from leftover sugar and food; a basic toothpaste neutralises this acid. (iii) Agriculture and rivers: plants need soil within a specific pH range for healthy growth, and rainwater with pH below 5.6 is called acid rain, which lowers river-water pH and makes survival difficult for aquatic life. The human body itself works only within a narrow pH range of 7.0 to 7.8, which is why all of these examples matter so much to living organisms.

5 Case Studies

Case Study
A student took zinc granules in two test tubes. Dilute sulphuric acid was added to the first test tube and sodium hydroxide solution to the second. Bubbles were seen escaping from both test tubes. When a burning candle was brought near the mouth of each test tube, the gas burnt with a pop sound.

(A) 1 mark What gas was released in both test tubes?
Answer: Hydrogen gas (H₂).

(B) 1 mark What is the ‘pop’ sound the standard test for?
Answer: It is the standard test that confirms hydrogen gas.

(C) 2 marks Write the balanced chemical equation for the reaction in the first test tube (with acid).
Answer: Zn(s) + H₂SO₄(aq) → ZnSO₄(aq) + H₂(g)↑

(D) 2 marks Write the balanced equation for the reaction in the second test tube (with base), and state what it proves.
Answer: 2NaOH(aq) + Zn(s) → Na₂ZnO₂(s) + H₂(g)↑. It proves that zinc can react with a base as well as an acid, releasing hydrogen gas in both cases.

Case Study
A milkman sells fresh milk every day, and its pH is 6. To stop the milk from turning sour (into curd) too quickly, he adds a small amount of baking soda to it, which raises the milk’s pH to slightly alkaline.

(A) 1 mark What is the pH of the fresh milk before baking soda is added?
Answer: 6.

(B) 1 mark Is baking soda acidic or basic?
Answer: Basic.

(C) 2 marks Why does adding baking soda shift the milk’s pH from 6 to slightly alkaline?
Answer: Baking soda (NaHCO₃) is a mild basic salt; adding it neutralises some of the natural acidity of the milk, raising the pH from 6 towards the alkaline side.

(D) 2 marks Why does this milk take longer to turn into curd?
Answer: Milk turns into curd as bacteria produce lactic acid, lowering its pH; starting from a higher (slightly alkaline) pH means it takes longer for the acid produced to bring the pH down to the point where curdling happens.