The essence of this chapter for last-minute revision: definitions, key facts and tables. The full notes, with the whole explanation, are available separately.
1 The chapter in one line each
Describing Motion Around Us
1 · Position, rest, motionEverything measured from a fixed reference point
2 · Distance and displacementPath covered, versus net shift from start to finish
3 · Average speed and velocityHow fast, and how fast in which direction
4 · Average accelerationHow quickly the velocity itself is changing
5 · Position-time graphsSlope of the line gives the velocity
6 · Velocity-time graphsSlope gives acceleration, area gives displacement
7 · Equations of motionThree formulas for constant acceleration
8 · Uniform circular motionConstant speed, yet still accelerating
2 Definitions to learn by heart
- Position: the distance and direction of an object from a fixed reference point, at a given instant of time.
- Motion: a change in the object’s position with respect to the reference point, over time. Rest: no such change.
- Total distance travelled: the whole length of the path actually covered, regardless of direction.
- Displacement: the net change in position between two instants, stated with a magnitude and a direction.
- Instant of time: one single reading of a clock (e.g. 4 s). Time interval: the gap between two readings (e.g. 6 s between 4 s and 10 s).
- Uniform motion: equal distances covered in equal intervals of time, for every choice of interval. Otherwise, non-uniform motion.
- Average acceleration: the change in velocity divided by the time interval over which it occurs.
- Slope: the steepness of a line on a graph; it gives the rate of change of the Y-axis quantity with respect to the X-axis quantity.
- Uniform circular motion: motion along a circular path at a constant (unchanging) speed.
- Scalars need only a numerical value (distance, time, speed). Vectors need a direction too (displacement, velocity, acceleration).
3 Formulas and units
| Quantity | Formula | SI unit |
|---|---|---|
| Average speed | total distance travelled ÷ time interval | m s-1 |
| Average velocity | displacement ÷ time interval, vav = s/t | m s-1 |
| Average acceleration | a = (v – u) / (t2 – t1) | m s-2 |
The three equations of motion
v = u + at s = ut + ½at² v² = u² + 2as
Valid only when acceleration is constant. Choose the one that leaves out whichever quantity the question does not mention. Two extras: s = vt – ½at², and s = ½(u + v)t (the trapezium-area shortcut).
4 Conversion and numbers to remember
5/18multiply km/h by this to get m/s
18/5multiply m/s by this to get km/h
9.8 m/s²g, the constant acceleration of a freely falling object
- 36 km/h = 10 m/s · 54 km/h = 15 m/s · 72 km/h = 20 m/s · 108 km/h = 30 m/s
- A falling object’s velocity climbs 0, 9.8, 19.6, 29.4, 39.2 m/s at the end of each successive second: a constant gain of 9.8 m/s every second.
- 5th century CE: Aryabhata’s Aryabhatiya already uses speed = distance ÷ time. 14th century CE: the Ganitakaumudi‘s two-postmen problem (210 yojanas apart, 9 and 5 yojanas/day, meet in 15 days) uses the same idea.
- Braking distance (from the moment the brakes act, same deceleration) is proportional to u²: doubling the initial speed makes it four times as long (28.1 m at 54 km/h, 112.5 m at 108 km/h for a = -4 m/s²). The total stopping distance also includes the reaction distance (speed × reaction time), which grows only as u, so the total grows by less than four times.
5 Distance vs displacement
| Point of difference | Total distance travelled | Displacement |
|---|---|---|
| What it measures | The whole path covered | Change of position, start to finish |
| Direction | Not needed (scalar) | Must be stated (vector) |
| Can it be zero while the object moved? | No | Yes, if it returns to its starting point |
| Which is larger | Distance is always ≥ the magnitude of displacement; equal when the object moves in one direction without turning back | |
6 Reading a graph at a glance
| Graph | Slope gives | Area under the line gives |
|---|---|---|
| Position-time | Velocity | Not a quantity taught in this chapter |
| Velocity-time | Acceleration | Displacement |
- Position-time graph: straight sloping line = constant velocity; curve = velocity changing (accelerating); flat line (parallel to the time axis) = at rest; steeper line = greater velocity.
- A graph is not a route map: it does not show the physical path, only how the quantity on the Y-axis changes with time.
7 Uniform circular motion
2πRdistance covered in one full revolution of radius R
0displacement after exactly one full revolution
vav = 2πR/Taverage speed over one revolution, T = time for one revolution
- An athlete changes direction 4 times on a rectangular track, 6 times on a hexagonal track; on a circular track, the direction changes continuously, at every instant.
- The velocity at any point on the circle acts along the tangent to the circle at that point.
- Marble-and-ring activity: once the ring is lifted away, the marble moves off in a straight line, along the direction it was moving at the instant the ring was removed (the tangent). The book gives the reason for this in a later chapter.
- UCM is accelerated motion: speed stays constant, but the direction of velocity changes at every instant, and a vector’s direction changing is enough for acceleration.
- UCM is an idealised model; real circular paths and speeds are rarely perfectly constant, but the model is the foundation for planets orbiting the Sun and a vehicle taking a turn.
8 Quick recap
- Position needs a reference point, a distance and a direction; motion means that position changes with time.
- Distance is the whole path covered; displacement is the straight shift from start to finish, and it can be zero.
- Average speed uses distance; average velocity uses displacement, so only velocity carries a direction.
- Acceleration measures how quickly velocity changes, not how large the velocity is; a bus at a steady 80 km/h on a straight highway has zero acceleration.
- On a position-time graph, slope = velocity. On a velocity-time graph, slope = acceleration and area = displacement.
- For constant acceleration: v = u + at, s = ut + ½at², v² = u² + 2as.
- Fuel used depends on the distance travelled, not on the displacement.
- In one revolution of a circle: distance = 2πR, displacement = 0.
- Uniform circular motion has constant speed but changing direction, so it is accelerated motion.
More for this chapter