Class 10 Science Chapter 3 Metals and Non-metals Important Questions with Answers

Exam-useful questions from this chapter, grouped by marks, each with a full model answer. Try writing the answer yourself first, then check it against this one.

1 1-Mark Questions

Question 1 (1 mark)

Q. What is metallic lustre?

Answer: The shiny appearance of a metal’s surface in its pure state is called metallic lustre.

Question 2 (1 mark)

Q. What is malleability?

Answer: The property of a metal that lets it be hammered into thin sheets is called malleability.

Question 3 (1 mark)

Q. Name two of the most malleable metals.

Answer: Gold and silver are the most malleable metals.

Question 4 (1 mark)

Q. Give two examples of amphoteric oxides.

Answer: Aluminium oxide (Al₂O₃) and zinc oxide (ZnO) are examples of amphoteric oxides.

Question 5 (1 mark)

Q. What is a mineral?

Answer: An element or compound found naturally in the earth’s crust is called a mineral.

Question 6 (1 mark)

Q. What is an ore?

Answer: A mineral from which a metal can be extracted profitably, because it contains enough of that metal, is called an ore.

Question 7 (1 mark)

Q. What is gangue?

Answer: Impurities such as soil and sand mixed with an ore are called gangue.

Question 8 (1 mark)

Q. Cinnabar is an ore of which metal?

Answer: Cinnabar (HgS) is an ore of mercury.

Question 9 (1 mark)

Q. What is an amalgam?

Answer: An alloy made with mercury is called an amalgam.

Question 10 (1 mark)

Q. What is galvanisation?

Answer: Coating iron or steel with a thin layer of zinc to protect it from rusting is called galvanisation.

2 2-Mark Questions

Question 1 (2 marks)

Q. What is the difference between malleability and ductility, with examples?

Answer: Malleability is the property that lets a metal be hammered into thin sheets, as with gold and silver. Ductility is the property that lets a metal be drawn into thin wire, as with gold (about 2 km of wire from 1 gram of gold). Both are possible because of the atomic structure of metals, but one produces a sheet and the other a wire.

Question 2 (2 marks)

Q. Write the equations for aluminium oxide reacting with both an acid and a base.

Answer: Al₂O₃ + 6HCl → 2AlCl₃ + 3H₂O (with an acid)
Al₂O₃ + 2NaOH → 2NaAlO₂ + H₂O (with a base, forming sodium aluminate)

Question 3 (2 marks)

Q. Why is sodium kept immersed in kerosene oil?

Answer: Sodium reacts very fast with oxygen and catches fire if left in the open. Keeping it immersed in kerosene oil stops it from coming into direct contact with air, preventing accidental fires.

Question 4 (2 marks)

Q. What is the difference between how magnesium and zinc react with water?

Answer: Magnesium does not react with cold water, but reacts with hot water to form magnesium hydroxide and hydrogen. Zinc does not react with either cold or hot water, it reacts only with steam, forming zinc oxide and hydrogen.

Question 5 (2 marks)

Q. What is the difference between roasting and calcination?

Answer: In roasting, a sulphide ore is heated strongly in the presence of excess air, converting it to an oxide: 2ZnS + 3O₂ → 2ZnO + 2SO₂. In calcination, a carbonate ore is heated in limited air: ZnCO₃ → ZnO + CO₂. Both convert an ore into an oxide, but they differ in the type of ore used and the amount of air.

Question 6 (2 marks)

Q. What is the thermit reaction, and where is it used?

Answer: The highly exothermic displacement reaction between iron(III) oxide (Fe₂O₃) and aluminium is called the thermit reaction: Fe₂O₃ + 2Al → 2Fe + Al₂O₃ + heat. So much heat is released that iron is obtained in the molten state; it is used for joining railway tracks and machine parts.

Question 7 (2 marks)

Q. What are the anode, cathode and electrolyte in electrolytic refining?

Answer: The impure metal is made the anode, a thin strip of the pure metal the cathode, and a solution of a salt of the same metal the electrolyte. On passing current, impure metal dissolves from the anode into the solution and an equal amount of pure metal is deposited on the cathode.

Question 8 (2 marks)

Q. What two conditions are necessary for rusting? Explain using Activity 3.14.

Answer: Both air (oxygen) and water must be present for rusting to occur. In the three-test-tube experiment, only the nail in test tube A (which had both) rusted; B (water with no dissolved air) and C (only dry air) did not rust.

Question 9 (2 marks)

Q. What is stainless steel made of, and what are its properties?

Answer: Stainless steel is made by adding nickel and chromium to iron. It is hard and does not rust, unlike pure iron, which is soft and rusts easily.

Question 10 (2 marks)

Q. What did Activity 3.8 show about the acidic or basic nature of the oxides formed when magnesium and sulphur are burnt?

Answer: Magnesium ash dissolved in water turned red litmus paper blue, showing that magnesium oxide (a metal oxide) is basic. Sulphur dioxide dissolved in water turned blue litmus paper red, showing that it (a non-metal oxide) is acidic. This confirms the general rule: most metal oxides are basic and most non-metal oxides are acidic.

3 4-Mark Questions

Question 1 (4 marks)

Q. What is the reactivity series? Write it out from K to Au and explain its importance.

Answer: The reactivity series is a list of metals arranged in order of decreasing reactivity: K, Na, Ca, Mg, Al, Zn, Fe, Pb, [H], Cu, Hg, Ag, Au. Its importance lies in deciding whether a metal can displace hydrogen from an acid (only metals above [H] can), which metal can displace another from its salt solution, and even the correct method for extracting a metal, which depends on where it sits in this series.

Question 2 (4 marks)

Q. Describe the four main properties of ionic compounds, with examples.

Answer: 1. Physical nature: solid, somewhat hard but brittle, e.g. NaCl.
2. Melting and boiling points: very high, e.g. NaCl melts at 1074 K, because a great deal of energy is needed to break the strong inter-ionic force of attraction.
3. Solubility: soluble in water, insoluble in kerosene and petrol.
4. Electrical conductivity: no conduction in the solid state (ions cannot move), but they conduct in aqueous solution and in the molten state (ions are then free to move).

Question 3 (4 marks)

Q. Explain the formation of sodium chloride and magnesium chloride, with electronic configurations.

Answer: Sodium (2,8,1) loses one electron from its outermost shell to become Na⁺ (2,8). Chlorine (2,8,7) gains that electron to become Cl⁻ (2,8,8): Na → Na⁺ + e⁻, Cl + e⁻ → Cl⁻. The two ions are held together by their opposite charges, forming sodium chloride.
Magnesium (2,8,2) has to give up two electrons, so forming Mg²⁺ (2,8) needs two chlorine atoms: Mg → Mg²⁺ + 2e⁻, and two chlorine atoms each gain one electron to form 2Cl⁻, together forming MgCl₂.

Question 4 (4 marks)

Q. Explain the extraction of metals in each of the three reactivity classes.

Answer: 1. Low-reactivity metals (e.g. Cu, Hg): found in the free state or as sulphide/oxide ores; the metal can be obtained by heating alone, as with mercury from cinnabar (HgS).
2. Medium-reactivity metals (e.g. Zn, Fe, Pb): a sulphide/carbonate ore is first converted to an oxide by roasting/calcination, then reduced with carbon.
3. High-reactivity metals (e.g. K, Na, Ca, Mg, Al): carbon cannot reduce these, so they are obtained by electrolysis of their molten compounds.

Question 5 (4 marks)

Q. Write the six methods of preventing corrosion, and explain galvanisation in detail.

Answer: Six methods: painting, applying oil/grease, galvanisation, chromium plating, anodising, and alloying.
In galvanisation, a thin layer of zinc is coated onto the surface of iron or steel. Zinc is more reactive than iron, so even if the coating is scratched, the zinc corrodes first and the iron underneath continues to be protected.

4 6-Mark Questions

Question 1 (6 marks)

Q. How do metals react with oxygen, water and dilute acids? Explain each case with examples.

Answer: 1. With oxygen: almost all metals combine with oxygen to form a metal oxide (metal + oxygen → metal oxide), e.g. 2Cu + O₂ → 2CuO. Reactivity varies: potassium/sodium catch fire in the open, while silver/gold do not react even at very high temperatures.
2. With water: metal + water → metal oxide + hydrogen. Potassium/sodium react violently with cold water (2Na + 2H₂O → 2NaOH + H₂ + heat energy), calcium reacts more slowly and floats, magnesium reacts only with hot water, aluminium/iron/zinc react only with steam, and lead/copper/silver/gold do not react with water at all.
3. With dilute acids: metal + dilute acid → salt + hydrogen. The order of reactivity is Mg > Al > Zn > Fe, while copper does not react with dilute HCl. Nitric acid is an exception: it usually does not give hydrogen gas (except with magnesium and manganese in very dilute form), because it is a strong oxidising agent.

Question 2 (6 marks)

Q. Explain, step by step, all the stages in obtaining a pure metal from its ore.

Answer: 1. Enrichment of ores: gangue (soil, sand) mixed with the mined ore is removed based on differences between the physical/chemical properties of the ore and the gangue.
2. Converting the concentrated ore to a metal oxide: a sulphide ore is converted by roasting (heating in excess air), a carbonate ore by calcination (heating in limited air).
3. Reduction of the oxide to the metal: for low-reactivity metals, heating alone is enough; for medium-reactivity metals, reduction with carbon (ZnO + C → Zn + CO) or displacement by a highly reactive metal (as in the thermit reaction); for high-reactivity metals, electrolysis of the molten compound.
4. Refining of metals: the metal obtained still has impurities, so it is purified by electrolytic refining. The impure metal is made the anode, the pure metal the cathode, and a solution of the metal’s salt the electrolyte. Soluble impurities pass into the solution, and insoluble impurities settle as anode mud.

5 Case Studies

Case Study
A student took samples of different metals and burnt them in a flame (Activity 3.9). Magnesium burnt with a dazzling white flame, iron filings burnt rapidly, a black layer formed on the surface of copper, while silver and gold showed no change at all.

(A) 1 mark What product forms when magnesium burns?
Answer: Magnesium oxide (MgO) forms, seen as a white ash.

(B) 1 mark What substance is the black layer on copper made of?
Answer: The black layer is copper(II) oxide (CuO).

(C) 2 marks Why did silver and gold show no change?
Answer: Silver and gold sit at the very bottom of the reactivity series, so they do not react with oxygen even at very high temperatures.

(D) 2 marks Based on this experiment, arrange these metals in decreasing order of reactivity with oxygen (magnesium, iron, copper, silver).
Answer: Magnesium > iron > copper > silver: magnesium burns fastest, while silver does not react at all.

Case Study
A factory uses electrolytic refining to purify copper. Impure copper is made one electrode and dipped into acidified copper sulphate solution, while the other electrode is a thin strip of pure copper. After passing current for some time, a dark-coloured powder was found to have collected at the bottom near one electrode.

(A) 1 mark Which electrode is the impure copper made into, in this process?
Answer: Impure copper is made the anode.

(B) 1 mark What is the acidified copper sulphate solution called in this process?
Answer: It is called the electrolyte.

(C) 2 marks What is the dark-coloured powder collected at the bottom called, and what does it show?
Answer: It is called anode mud. It shows that insoluble impurities present in the impure copper did not dissolve in the solution and settled below the anode instead.

(D) 2 marks Explain what happens at the cathode while current is passed.
Answer: An amount of pure metal equal to what dissolves from the anode is deposited on the cathode, so the pure copper strip at the cathode gradually grows thicker.