Exam-useful questions from this chapter, grouped by marks, each with a full model answer. Try writing the answer yourself first, then check it against this one.
Board note: CBSE teaches this book in Class 11; UP, Bihar, Rajasthan and MP Boards teach it in Class 12 Microeconomics. In CBSE 2026-27 the unit ‘Producer Behaviour and Supply’ carries 14 marks (together with Chapter 3). The long run supply curve of a firm is not in the CBSE 2026-27 syllabus, but questions on it are kept for state boards. In numerical answers, (½) and (1) show step marks.
1 1-Mark Questions
Q. What is a price-taking firm?
Answer: A firm that takes the market price as given: it cannot sell anything above it and can sell as much as it wants at it.
Q. What is the shape of a firm’s demand curve under perfect competition?
Answer: A horizontal straight line (the price line) at the height of the market price p, that is perfectly elastic.
Q. What is the short run shut down point?
Answer: The point of minimum AVC, where the SMC curve cuts the AVC curve; below this price the firm produces nothing.
Q. Define normal profit.
Answer: The minimum level of profit needed to keep a firm in the existing business.
Q. Define the price elasticity of supply.
Answer: The percentage change in quantity supplied due to a one per cent change in price: eS = %ΔQ ÷ %ΔP.
Q. How is the market supply curve obtained?
Answer: By adding the supplies of all firms at each price, that is the horizontal summation of individual supply curves.
Q. What is the price elasticity of a vertical supply curve?
Answer: Zero, because quantity supplied does not change when the price changes.
Q. What is a supply schedule?
Answer: A table describing the quantities sold by a firm at various prices, technology and factor prices remaining unchanged.
2 2-Mark Questions
Q. State two differences between a movement along the supply curve and a shift of the supply curve.
Answer: (1) A movement is caused only by a change in the good’s own price; a shift by other factors (technology, input prices, taxes). (1)
(2) In a movement the point changes on the same curve (extension/contraction); in a shift the whole curve moves right (increase) or left (decrease). (1)
Q. Distinguish between normal profit and super-normal profit.
Answer: Normal profit is the minimum profit needed to stay in business and is part of total cost (opportunity cost for entrepreneurship). (1)
Super-normal profit is profit earned over and above normal profit; it arises when p > AC. (1)
Q. What does price-taking behaviour mean from the buyer’s viewpoint?
Answer: The buyer believes that if she asks for a price below the market price, no firm will sell to her. (1)
If she pays a price equal to or above the market price, she can buy as many units as she wants; so she accepts the market price. (1)
Q. The market price is ₹6. Write TR, AR and MR at 1, 2 and 3 units.
Answer: TR: 6, 12, 18; AR = TR/q: 6, 6, 6; MR = ΔTR: 6, 6, 6 (₹). (1½)
Under perfect competition AR = MR = p = ₹6. (½)
3 3-Mark Questions
Q. Prove that for a price-taking firm AR = MR = p.
Answer: AR = TR/q = (p × q)/q = p (1)
When output changes from q₁ to q₂, MR = (pq₂ − pq₁)/(q₂ − q₁) = p(q₂ − q₁)/(q₂ − q₁) = p (1½)
Hence AR = MR = p. Meaning: every extra unit sells at the same market price. (½)
Q. State three observations about the total revenue curve under perfect competition.
Answer: • At q = 0, TR = 0, so the curve passes through the origin O. (1)
• TR rises with output, and since p is constant, TR = p × q is an upward-rising straight line. (1)
• At one unit TR = p, so the slope Aq₁/Oq₁ = p (the market price). (1)
Q. A competitive firm’s total cost at outputs 0 to 5 is ₹4, 12, 18, 25, 34, 45 and the price is ₹10. Find the profit at each level and the profit-maximising output.
Answer: TR = 10q: 0, 10, 20, 30, 40, 50 (½)
Profit = TR − TC: −4, −2, 2, 5, 6, 5 (1)
MC: 8, 6, 7, 9, 11; the 4th unit has MC 9 < 10 = MR, the 5th MC 11 > 10 (1)
Profit-maximising output = 4 units, maximum profit = ₹6. (½)
Q. How do technological progress and a rise in an input price affect a firm’s supply curve?
Answer: • The supply curve is part of the MC curve, so any factor that changes MC changes the supply curve. (½)
• Technological progress: organisational innovation gives more output from the same inputs, MC falls at every output, the supply curve shifts right. (1¼)
• Rise in an input price (e.g. wage): production cost and MC rise, the supply curve shifts left. (1¼)
Q. When the price rises from ₹50 to ₹60, supply rises from 500 to 600 units. Find the price elasticity of supply and interpret it.
Answer: Formula: eS = (ΔQ/ΔP) × (P/Q) (½)
= (100/10) × (50/500) (1)
= 1 (1)
Interpretation: price and quantity both rose by 20%; supply is unitary elastic. (½)
Q. Distinguish between the shut down point and the break-even point.
Answer: • Location: in the short run the shut down point is at minimum AVC (SMC = AVC), the break-even point at minimum SAC (SMC = SAC). (1)
• Firm’s position: at the shut down point TR = TVC and the loss = TFC; at the break-even point TR = TC, only normal profit. (1)
• Lower price: below the shut down point production stops; below break-even but above shut down the firm produces at a loss in the short run. In the long run both are at minimum LRAC. (1)
Q. What is a unit tax? How does it affect a firm’s long run supply curve?
Answer: A unit tax is a tax the government imposes per unit sale of output; e.g. ₹2 per unit on 10 units gives a total tax of ₹20. (1)
With a tax of ₹t, LRAC and LRMC both rise by t at every output; minimum LRAC rises from p₀ to p₀ + t. (1)
The supply curve (part of LRMC) shifts left from S₀ to S₁: less is supplied at every price. (1)
Q. What is opportunity cost? Explain with the book’s example and state its link with normal profit.
Answer: The opportunity cost of an activity is the gain foregone from the second best activity. (1)
Investing ₹1,000 in the family business, the alternatives were the house-safe (0), bank-1 (10%) and bank-2 (5%); the best is bank-1, so the opportunity cost = ₹100 interest. (1)
Normal profit is the opportunity cost for entrepreneurship, so it is counted in total cost. (1)
4 4-Mark Questions
Q. Explain four features of perfect competition. How do they lead to price-taking behaviour?
Answer: • Large number of buyers and sellers: each is very small relative to the market; none can influence it alone. (1)
• Homogenous product: all firms’ products are identical; a buyer gets the same good from any firm. (½)
• Free entry and exit: keeps the number of firms large. (½)
• Perfect information: everyone fully knows price, quality and the market. (1)
Result: a firm that charges more than the market price loses all buyers to other firms; so everyone is a price-taker. (1)
Q. Find the producer’s equilibrium from this schedule (price ₹8): TC at outputs 1-5 is ₹8, 15, 20, 28, 38. Explain both conditions.
Answer: TR: 8, 16, 24, 32, 40; MR = 8; MC: 8, 7, 5, 8, 10; profit: 0, 1, 4, 4, 2 (1½)
Condition 1, MC = MR: at both 1 unit and 4 units. (1)
Condition 2, MC > MR after it: after 1 unit MC 7 < 8 (no); after 4 units MC 10 > 8 (yes). (1)
Equilibrium = 4 units, profit ₹4 (maximum). (½)
Q. Why does a competitive firm never produce on the falling part of MC? Explain with a diagram.
Answer: Diagram: U-shaped MC and the horizontal price line p; they meet at q₁ (MC falling) and q₄ (MC rising). (1)
Slightly left of q₁, p < MC; while MR < MC, cutting output raises profit, so a smaller output gives more profit and q₁ is not equilibrium. (1½)
Between q₁ and q₄, p > MC, so raising output pays; beyond q₄, MC > p. (1)
So profit is maximum only at q₄, where MC is rising. (½)
Q. Explain with a diagram why a firm does not produce in the short run when the price is below minimum AVC.
Answer: Diagram: SMC, AVC, SAC; price p below minimum AVC; at output q₁, AVC = OE. (1)
TR = rectangle OpAq₁; TVC = rectangle OEBq₁ (larger). (1)
Profit at q₁ = −(rectangle pEBA) − TFC; profit at zero output = −TFC. (1)
Producing loses more than TFC, so the firm chooses zero output (exits the market). (1)
Q. Two firms’ supplies are S₁(p) = p − 10 (p ≥ 10, else 0) and S₂(p) = p − 15 (p ≥ 15, else 0). Find market supply at ₹5, ₹12 and ₹20 and write Sm(p).
Answer: p = 5: S₁ = 0, S₂ = 0, Sm = 0 (½)
p = 12: S₁ = 2, S₂ = 0, Sm = 2 (1)
p = 20: S₁ = 10, S₂ = 5, Sm = 15 (1)
Sm(p) = 0 (p < 10); p − 10 (10 ≤ p < 15); 2p − 25 (p ≥ 15). This is horizontal summation. (1½)
Q. Using the geometric method, explain when elasticity on a straight line supply curve is greater than 1, equal to 1 and less than 1.
Answer: At point S (p₀, q₀), eS = Mq₀/Oq₀, where M is where the line (extended) meets the quantity axis. (1)
(a) Line starts from the positive price axis, M negative: Mq₀ > Oq₀, eS > 1. (1)
(b) Line through the origin: M = O, eS = 1. (1)
(c) Line starts from the positive quantity axis: Mq₀ < Oq₀, eS < 1. (1)
Q. Explain the law of supply with a supply schedule and curve. Why does the supply curve slope upward?
Answer: Law: other things remaining the same, a rise in price raises the quantity supplied. (1)
Schedule: 100 units at ₹1, 200 at ₹2, 300 at ₹3; the curve rises to the right. (1)
Reason: a higher price brings higher profit, so a greater incentive to produce. (1)
At the firm level: the supply curve is the rising part of SMC; a higher price p = MC is reached at a larger output. (1)
Q. When the price rises from ₹15 to ₹20, a firm’s supply rises from 10 to 20 units. Find the elasticity. Is supply elastic or inelastic?
Answer: %ΔQ = (20 − 10)/10 × 100 = 100 (1)
%ΔP = (20 − 15)/15 × 100 = 33.33 (1)
eS = 100 ÷ 33.33 = 3 (1)
eS > 1, so supply is elastic. (1)
5 6-Mark Questions
Q. Derive a firm’s short run supply curve with the help of a diagram.
Answer: Diagram: SMC, AVC, SAC; SMC cuts AVC at minimum AVC. (1)
Case 1 (p₁ ≥ minimum AVC): equating p₁ with the rising part of SMC gives q₁; at q₁ AVC does not exceed p₁; all three conditions hold, the firm sells q₁. (1½)
Case 2 (p₂ < minimum AVC): AVC > p₂ at every positive output; condition 3 fails, the firm chooses zero output. (1½)
Conclusion: short run supply curve = rising part of SMC from and above minimum AVC + zero at lower prices (bold line). (1)
Shut down point: minimum AVC; break-even point: minimum SAC. (1)
Q. Explain both conditions of producer’s equilibrium by the MR = MC approach, with a schedule and a diagram.
Answer: Meaning: the output at which profit (TR − TC) is maximum. (½)
Condition 1, MR = MC: while MR > MC each unit adds to profit; while MR < MC it reduces profit; so MR = MC. Under perfect competition p = MC. (1)
Condition 2, MC > MR after it: MR = MC may hold at several outputs; equilibrium is only where MC cuts MR from below. (1)
Schedule (price ₹8): MC 8, 7, 5, 8, 10; profit 0, 1, 4, 4, 2; MC = MR at 1 and 4, but only after 4 is MC > MR: equilibrium 4 units. (1½)
Diagram: horizontal MR = AR = 8, U-shaped MC; point A (MC falling) is not equilibrium, point B (MC rising) is. (1)
Condition 3: p ≥ AVC in the short run, p ≥ AC in the long run, otherwise the firm shuts down. (1)
Q. Explain short-run profit maximisation with a diagram. How are profit and loss shown as rectangles?
Answer: Equilibrium: q₀ where p = SMC (SMC rising); p > AVC. (1)
TR = p × q₀ = rectangle OpAq₀; TC = SAC × q₀ = rectangle OEBq₀. (1)
Profit: if p > SAC, profit = rectangle EpAB = (p − SAC) × q₀; e.g. p = 20, SAC = 16.5, q₀ = 4 ⇒ ₹14. (1½)
Loss (p < SAC but p ≥ AVC): the area of rectangle pEBA (height SAC − p, width q₀) is the loss; the firm still produces in the short run, as the loss is below TFC. (1)
p < minimum AVC: TVC (OEBq₁) > TR (OpAq₁), the loss is TFC + pEBA; the firm shuts down. (1)
Long run: at p < minimum LRAC the firm leaves the market, as shutting down gives zero profit. (½)
Q. Explain the determinants of a firm’s and the market’s supply curve. Distinguish between a movement along and a shift of the supply curve with diagrams.
Answer: Technological progress: MC falls, supply shifts right. (1)
Input prices: a rise in an input price such as the wage raises MC and shifts supply left; a fall shifts it right. (1)
Unit tax: AC and MC rise by t, supply shifts left (S₀ to S₁). (1)
Number of firms: more firms shift market supply right, fewer shift it left. (½)
Others (supplement): prices of other goods, goals of the firm. (½)
Movement vs shift: own price changes ⇒ movement along the curve (₹2 to ₹3: 200 to 300, extension; ₹2 to ₹1: contraction); other factors change ⇒ the whole curve shifts (at ₹2, 300 on S′ = increase, 100 on S″ = decrease). (2)
Q. Explain the meaning of the price elasticity of supply. Explain the percentage method and the geometric method with examples.
Answer: Meaning: responsiveness of quantity supplied to a change in price; eS = %ΔQ ÷ %ΔP. (1)
Percentage method: eS = (ΔQ/ΔP) × (P/Q). Book: price ₹10 to ₹30, balls 200 to 1000; %ΔQ = 400, %ΔP = 200, eS = 2. (2)
Geometric method: eS = Mq₀/Oq₀; M negative ⇒ > 1, M = O ⇒ = 1, M positive ⇒ < 1. (2)
Properties: eS = 0 on a vertical supply curve; positive on a positively sloped curve; independent of units. (1)
6 10-Mark Questions
Q. A competitive firm has TFC ₹30 and TVC at outputs 1 to 6 of ₹20, 36, 48, 64, 85, 114. The market price is ₹21. (a) Prepare a schedule of AVC, AC and MC. (b) Find the equilibrium output by MR = MC and the profit or loss. (c) Explain why the firm keeps producing in the short run. (d) State the shut down point, the break-even point and the firm’s supply schedule. (UP Board 10 marks)
Answer: (a) Schedule (₹):
q: 1, 2, 3, 4, 5, 6
TVC: 20, 36, 48, 64, 85, 114
TC = TVC + 30: 50, 66, 78, 94, 115, 144
AVC: 20, 18, 16, 16, 17, 19
AC: 50, 33, 26, 23.5, 23, 24
MC = ΔTVC: 20, 16, 12, 16, 21, 29 (3)
(b) Equilibrium: MR = p = 21. For the 5th unit MC = 21 = MR and for the 6th MC = 29 > 21; equilibrium output 5 units. TR = 105, TC = 115, loss = ₹10 (also ₹10 at 4 units, because the 5th unit has MR = MC). (2)
(c) Why produce in the short run: p (21) ≥ minimum AVC (16), so revenue covers all variable cost (85) and ₹20 of fixed cost; producing loses ₹10, shutting down loses TFC = ₹30. (2)
(d) Points: shut down point = minimum AVC ₹16 (4 units, where MC = AVC = 16); break-even point = minimum AC ₹23 (5 units). (1½)
Supply schedule (from the rising part of MC): below ₹16, 0; at ₹16, 4; at ₹21, 5; at ₹29, 6 units. (1)
Conclusion: the short run supply curve is the rising part of MC above minimum AVC. (½)
7 Source-Based Questions
(A) 1 mark Which two features of perfect competition appear in the passage?
Answer: A large number of sellers (hundreds of kilns) and a homogenous product (identical bricks); buyers knowing the price (perfect information) also appears. (any two)
(B) 2 marks What are the separate effects of the rise in the coal price and the entry of new kilns on the market supply curve?
Answer: Coal (an input) costlier: each kiln’s MC rises, supply shifts left. (1)
New kilns: the number of firms rises, the market supply curve shifts right. (1)
(C) 3 marks Which principle is the kiln owner’s statement based on? Explain.
Answer: The short-run condition p ≥ AVC (shut down point = minimum AVC). (1)
As long as the price covers variable cost, revenue also pays part of fixed cost, so the loss stays below TFC. (1)
If the price fell below minimum AVC, producing would lose more than TFC; then closing the kiln would be better. (1)
8 Data / Graph-Based Questions
(A) 2 marks Find MC and profit at each output.
Answer: MC (1-6): 7, 5, 6, 8, 10, 12 (1)
Profit = 10q − TC (0-6): −15, −12, −7, −3, −1, −1, −3 (1)
(B) 2 marks Find the equilibrium output by the MR = MC rule. Why will the firm keep producing in the short run despite the loss?
Answer: For the 5th unit MC = 10 = MR and for the 6th MC 12 > 10, so equilibrium is 5 units, loss ₹1. (1)
At 5 units TVC = 51 − 15 = 36, AVC = 7.2 < 10 = p; producing loses ₹1, shutting down loses TFC = ₹15, so it keeps producing. (1)