Class 9 Science Chapter 4 Describing Motion Around Us Short Notes in English

The essence of this chapter for last-minute revision: definitions, key facts and tables. The full notes, with the whole explanation, are available separately.

1 The chapter in one line each

Describing Motion Around Us
1 · Position, rest, motionEverything measured from a fixed reference point
2 · Distance and displacementPath covered, versus net shift from start to finish
3 · Average speed and velocityHow fast, and how fast in which direction
4 · Average accelerationHow quickly the velocity itself is changing
5 · Position-time graphsSlope of the line gives the velocity
6 · Velocity-time graphsSlope gives acceleration, area gives displacement
7 · Equations of motionThree formulas for constant acceleration
8 · Uniform circular motionConstant speed, yet still accelerating

2 Definitions to learn by heart

  • Position: the distance and direction of an object from a fixed reference point, at a given instant of time.
  • Motion: a change in the object’s position with respect to the reference point, over time. Rest: no such change.
  • Total distance travelled: the whole length of the path actually covered, regardless of direction.
  • Displacement: the net change in position between two instants, stated with a magnitude and a direction.
  • Instant of time: one single reading of a clock (e.g. 4 s). Time interval: the gap between two readings (e.g. 6 s between 4 s and 10 s).
  • Uniform motion: equal distances covered in equal intervals of time, for every choice of interval. Otherwise, non-uniform motion.
  • Average acceleration: the change in velocity divided by the time interval over which it occurs.
  • Slope: the steepness of a line on a graph; it gives the rate of change of the Y-axis quantity with respect to the X-axis quantity.
  • Uniform circular motion: motion along a circular path at a constant (unchanging) speed.
  • Scalars need only a numerical value (distance, time, speed). Vectors need a direction too (displacement, velocity, acceleration).

3 Formulas and units

Quantity Formula SI unit
Average speed total distance travelled ÷ time interval m s-1
Average velocity displacement ÷ time interval, vav = s/t m s-1
Average acceleration a = (v – u) / (t2 – t1) m s-2
The three equations of motion

v = u + at    s = ut + ½at²    v² = u² + 2as

Valid only when acceleration is constant. Choose the one that leaves out whichever quantity the question does not mention. Two extras: s = vt – ½at², and s = ½(u + v)t (the trapezium-area shortcut).

4 Conversion and numbers to remember

5/18multiply km/h by this to get m/s
18/5multiply m/s by this to get km/h
9.8 m/s²g, the constant acceleration of a freely falling object
  • 36 km/h = 10 m/s  ·  54 km/h = 15 m/s  ·  72 km/h = 20 m/s  ·  108 km/h = 30 m/s
  • A falling object’s velocity climbs 0, 9.8, 19.6, 29.4, 39.2 m/s at the end of each successive second: a constant gain of 9.8 m/s every second.
  • 5th century CE: Aryabhata’s Aryabhatiya already uses speed = distance ÷ time. 14th century CE: the Ganitakaumudi‘s two-postmen problem (210 yojanas apart, 9 and 5 yojanas/day, meet in 15 days) uses the same idea.
  • Braking distance (from the moment the brakes act, same deceleration) is proportional to u²: doubling the initial speed makes it four times as long (28.1 m at 54 km/h, 112.5 m at 108 km/h for a = -4 m/s²). The total stopping distance also includes the reaction distance (speed × reaction time), which grows only as u, so the total grows by less than four times.

5 Distance vs displacement

Point of difference Total distance travelled Displacement
What it measures The whole path covered Change of position, start to finish
Direction Not needed (scalar) Must be stated (vector)
Can it be zero while the object moved? No Yes, if it returns to its starting point
Which is larger Distance is always ≥ the magnitude of displacement; equal when the object moves in one direction without turning back

6 Reading a graph at a glance

Graph Slope gives Area under the line gives
Position-time Velocity Not a quantity taught in this chapter
Velocity-time Acceleration Displacement
  • Position-time graph: straight sloping line = constant velocity; curve = velocity changing (accelerating); flat line (parallel to the time axis) = at rest; steeper line = greater velocity.
  • A graph is not a route map: it does not show the physical path, only how the quantity on the Y-axis changes with time.

7 Uniform circular motion

2πRdistance covered in one full revolution of radius R
0displacement after exactly one full revolution
vav = 2πR/Taverage speed over one revolution, T = time for one revolution
  • An athlete changes direction 4 times on a rectangular track, 6 times on a hexagonal track; on a circular track, the direction changes continuously, at every instant.
  • The velocity at any point on the circle acts along the tangent to the circle at that point.
  • Marble-and-ring activity: once the ring is lifted away, the marble moves off in a straight line, along the direction it was moving at the instant the ring was removed (the tangent). The book gives the reason for this in a later chapter.
  • UCM is accelerated motion: speed stays constant, but the direction of velocity changes at every instant, and a vector’s direction changing is enough for acceleration.
  • UCM is an idealised model; real circular paths and speeds are rarely perfectly constant, but the model is the foundation for planets orbiting the Sun and a vehicle taking a turn.

8 Quick recap

  • Position needs a reference point, a distance and a direction; motion means that position changes with time.
  • Distance is the whole path covered; displacement is the straight shift from start to finish, and it can be zero.
  • Average speed uses distance; average velocity uses displacement, so only velocity carries a direction.
  • Acceleration measures how quickly velocity changes, not how large the velocity is; a bus at a steady 80 km/h on a straight highway has zero acceleration.
  • On a position-time graph, slope = velocity. On a velocity-time graph, slope = acceleration and area = displacement.
  • For constant acceleration: v = u + at, s = ut + ½at², v² = u² + 2as.
  • Fuel used depends on the distance travelled, not on the displacement.
  • In one revolution of a circle: distance = 2πR, displacement = 0.
  • Uniform circular motion has constant speed but changing direction, so it is accelerated motion.