Exam-useful questions from this chapter, grouped by marks, each with a full model answer. Try writing the answer yourself first, then check it against this one.
1 1-Mark Questions
Q. Define a landform.
Answer: A landform is a natural feature on the Earth’s surface, formed by weathering, erosion, deposition and the movement of the Earth’s crust, such as mountains, valleys, plateaus, plains, deserts and coasts.
Q. What is weathering?
Answer: Weathering is the process by which rocks on the Earth’s surface break down into smaller pieces, without any movement of the broken material.
Q. What is the lithosphere?
Answer: The lithosphere is the rigid outer layer of the Earth, made up of the crust and the uppermost part of the mantle, and it is broken into the different tectonic plates.
Q. What is the asthenosphere?
Answer: The asthenosphere is the hot, semi-molten layer just below the lithosphere; it is soft enough to flow slowly, which lets the rigid plates above it move.
Q. What is a moraine?
Answer: A moraine is a landform made of rock, soil and debris (called till) that is carried and left behind by a glacier when it melts.
Q. What is karst topography?
Answer: Karst topography is a landscape of unique landforms, such as caves, sinkholes and stalactites, created when underground water chemically dissolves soluble rock like limestone.
Q. What is a Glacial Lake Outburst Flood (GLOF)?
Answer: A GLOF is a sudden, destructive flood caused by the abrupt release of a large volume of water when a glacial lake’s natural dam of ice or moraine collapses.
Q. Name the three main types of tectonic plates.
Answer: Continental plates (which carry continents), oceanic plates (which carry ocean floors), and mixed plates (which carry both continents and ocean floor).
2 2-Mark Questions
Q. Distinguish between weathering and erosion.
Answer: Weathering breaks rocks into smaller pieces in the same place, without moving the material anywhere. Erosion wears away soil, rock and other surface material AND carries it to another place, using an agent such as water, wind, ice or waves.
Q. Distinguish between a delta and a meander.
Answer: A meander is a winding bend in the middle or lower course of a river, formed by erosion on the outer bank and deposition on the inner bank. A delta is a fan-shaped landform built where a river deposits its sediment at its mouth, as it flows into a sea, ocean or lake.
Q. Name the five agents of gradation named in the chapter, with an example landform for each.
Answer: Running water (valleys, meanders, deltas), glaciers (U-shaped valleys), wind (dunes, yardangs), waves (cliffs, beaches), and groundwater (caves, sinkholes).
Q. Name the three types of weathering with one example each.
Answer: Physical weathering (rock breaking due to temperature changes, frost or wind), chemical weathering (minerals reacting with water, air or acids), and biological weathering (plant roots growing into cracks and splitting rocks apart).
Q. How are deforestation and erosion associated with each other? Explain.
Answer: Deforestation removes the plant roots and cover that normally bind soil together and slow down rainwater. Without this protection, rain and wind erode the exposed topsoil far more easily, so cutting down trees directly increases the rate and severity of erosion.
Q. What precautionary measures should a person take if living in an earthquake-prone region?
Answer: Keep heavy objects stored low, identify the safest spots in each room (such as under a sturdy table and away from windows), keep an emergency kit ready, and practise a family evacuation plan.
Q. Name the four types of sand dunes mentioned in the chapter.
Answer: Barchan dunes (crescent-shaped), longitudinal dunes (long ridges parallel to the wind), star dunes (multiple arms, form where winds blow from different directions), and parabolic dunes (U-shaped, often held in place by vegetation).
Q. Name any two ancient Indian soil and water conservation techniques mentioned in the chapter.
Answer: Contouring (trenches dug along a hillside’s contour lines to slow down and soak up rainwater) and bunding (earthen embankments along contour lines that slow surface run-off and increase water infiltration); terracing is a third example described in the chapter.
3 4-Mark Questions
Q. Explain the theory of plate tectonics and the three types of plate boundaries, with one example of each.
Answer: Plate tectonics, a theory given by W.J. Morgan, states that the Earth’s outermost layer is broken into several tectonic plates that move slowly over the semi-molten asthenosphere beneath them. At a convergent boundary, plates move towards each other: colliding continental plates form fold mountains like the Himalaya, while an oceanic plate sinking beneath a continental plate causes volcanoes and earthquakes. At a divergent boundary, plates move apart, letting magma rise to form new crust, as at the Mid-Atlantic Ridge. At a transform boundary, plates slide past each other without creating or destroying crust, mainly causing earthquakes, as along the San Andreas Fault.
Q. Describe the landforms formed by a river in its upper, middle and lower course.
Answer: In its upper course, where the river flows fast down a steep gradient, it forms V-shaped valleys, waterfalls and rapids. In its middle course, as the river loses energy, it begins to meander, forming oxbow lakes and floodplains. In its lower course, the slow-moving river deposits large amounts of sediment, forming deltas, levees and alluvial fans.
Q. Explain how a sea cave, arch and stack are formed, in sequence.
Answer: Waves erode weak parts of the rock in a headland, forming sea caves. When caves on opposite sides of a headland meet, a sea arch is created. When the arch collapses, an isolated pillar of rock, called a sea stack, is left standing apart from the headland.
Q. Describe any four landforms created by glaciers.
Answer: (i) U-shaped valley: formed as a glacier widens and deepens an old river valley. (ii) Cirque: a bowl-shaped hollow carved at the head of a glacier. (iii) Arete: a sharp ridge left between two glacial valleys. (iv) Fjord: a deep, narrow inlet formed when the sea floods a glacial valley.
Q. Describe the landforms created by wind in desert regions.
Answer: Wind erosion creates yardangs (streamlined rock ridges), ventifacts (rocks polished by sandblasting), deflation hollows (shallow depressions where loose material has blown away), and desert pavements (flat, stony surfaces left after fine particles blow away). Wind deposition builds sand dunes of different shapes, including crescent-shaped barchan dunes and long, ridge-like longitudinal dunes.
Q. Describe the landforms created by underground water, and explain why they are found mainly where limestone or other soluble rock is present.
Answer: Underground water, especially in areas of limestone or other soluble rocks, creates karst topography. Landforms include caves (hollow spaces where acidic water dissolves rock), stalactites (hanging from a cave’s ceiling) and stalagmites (rising from its floor), sinkholes or dolines (where the ground collapses into an underground cavity), and underground rivers flowing through cave systems. These landforms form mainly where the local rock is soluble, since the process depends on chemical dissolution of the rock, not just physical wearing away.
Q. Explain the causes of landslides and suggest two mitigation measures.
Answer: Landslides are caused by heavy and continuous rainfall (which adds weight to the soil and reduces friction), earthquakes and volcanic eruptions (which shake and weaken slopes), steep slopes with loose or weathered rock, and human activities such as deforestation, mining, road construction and unplanned construction on hillsides. Mitigation measures include afforestation, which uses roots to bind the soil, and avoiding construction on unstable slopes; retaining walls and better drainage also help reduce the risk.
Q. Explain the causes of a Glacial Lake Outburst Flood (GLOF) and suggest two mitigation measures.
Answer: A GLOF is caused by the rapid melting of glaciers, due to rising temperatures, which increases the size and water level of a glacial lake and puts pressure on its natural dam of ice or loose moraine. Heavy rainfall, earthquakes, avalanches or landslides can further weaken or strike this dam until it suddenly collapses, releasing a destructive flood downstream. Mitigation measures include regularly monitoring glacial lakes at risk, and installing controlled drainage or early-warning systems in vulnerable Himalayan valleys.
4 6-Mark Questions
Q. “Plate movements are responsible for the distribution of earthquakes and volcanoes.” Explain.
Answer: Plate tectonics states that the Earth’s outer layer is broken into moving tectonic plates that meet at plate boundaries. At convergent boundaries, colliding continental plates push up fold mountains such as the Himalaya; where an oceanic plate collides with a continental plate, it sinks beneath it (subduction), which directly causes volcanic activity and earthquakes. At divergent boundaries, plates move apart and magma rises to form new crust, as at the Mid-Atlantic Ridge, a process also linked to volcanic activity along the ridge. At transform boundaries, plates slide past each other without creating or destroying crust; this movement mainly causes earthquakes, as along the San Andreas Fault. As a result, most of the world’s earthquakes and volcanoes are concentrated along these plate boundaries, especially in the belt around the Pacific Ocean called the Ring of Fire, confirming that the distribution of these disasters directly follows the pattern of plate movement and plate boundaries, not random chance.
Q. With the help of labelled points, describe the main features of a meander and a delta.
Answer: Meander: key features are (1) the river channel, (2) the steep, eroded outer bank, where the current is fastest and erosion dominates, (3) the bar or gentle inner bank, where sediment is deposited, and (4) an oxbow lake, a cut-off loop left behind once a meander’s neck is breached. A meander forms because the river erodes its outer bank and deposits sediment on its inner bank, gradually creating large loops; the fertile soil along its banks supports agriculture and settlement. Delta: key features are (1) the main river channel, (2) distributaries, the smaller channels the river splits into near its mouth, (3) islands and bars of deposited sediment between the distributaries, and (4) the sea, ocean or lake the river flows into. A delta forms because the river’s sediment load is deposited as it loses speed entering the standing water, building up a fan-shaped or triangular area of fertile alluvial land.
Q. Discuss how erosion affects different human occupations, using examples from the chapter.
Answer: Erosion shapes the Earth’s surface but also directly affects human livelihoods. For farmers, erosion removes the fertile topsoil needed for crop growth, lowering yields. For people living near rivers and coasts, erosion can wash away land, houses and roads, causing damage and loss of property. In construction and mining, erosion destabilises the land, creating safety risks for workers and structures. Even industries like tourism and fishing suffer, since the beaches, rivers and fertile lands they depend on may be destroyed by erosion. This shows that erosion is not only a natural geological process shaping landforms, but also a force that directly touches human labour and livelihoods across farming, construction, mining, tourism and fishing.
Q. Discuss the four disasters linked to landforms described in the chapter: their causes, and one prone area and mitigation measures for each.
Answer: Landslide: caused by heavy rainfall, earthquakes, steep slopes with loose rock, deforestation, mining and unplanned construction; prone in steep Himalayan and Western Ghat slopes; mitigated by afforestation, terracing, retaining walls and avoiding construction on unstable slopes. Avalanche: caused by heavy snowfall on an already unstable snowpack, a sudden temperature rise, strong winds and vibrations; prone on high, snow-covered mountain slopes such as the Himalaya; mitigated by snow fences, avoiding unstable slopes and early-warning systems. GLOF: caused by rapid glacier melting putting pressure on a glacial lake’s ice or moraine dam until it collapses, sometimes triggered by earthquakes or landslides; prone in glacial-lake regions of the Himalaya, such as South Lhonak Lake in Sikkim (October 2023); mitigated by monitoring glacial lakes, controlled drainage and early-warning systems. Dust storm: caused by strong winds lifting loose, dry soil during drought, worsened by sparse vegetation, overgrazing and climate change; prone in desert and semi-arid regions such as the Thar; mitigated by shelterbelts of trees, afforestation and better farming practices. (The causes are from the chapter. The chapter leaves prone areas and mitigation measures for students to research from newspapers, atlases and books, so these are general examples.)
5 Case Studies
(A) 1 mark What name is given to a disaster caused by the sudden release of water from a glacial lake?
Answer: A Glacial Lake Outburst Flood (GLOF).
(B) 2 marks According to the passage, what two kinds of events can weaken or break a glacial lake’s natural dam?
Answer: Rapid melting of glaciers, which raises the lake’s water level and the pressure on its dam; and sudden shocks, such as an earthquake, avalanche or landslide striking or weakening the dam.
(C) 2 marks Suggest two mitigation measures that could reduce the damage caused by a GLOF.
Answer: Regularly monitoring glacial lakes at risk of a GLOF, and setting up controlled drainage or early-warning systems in vulnerable Himalayan valleys so that downstream villages can be evacuated in time.
(A) 1 mark Name the two tectonic plates whose collision makes the Himalayan region earthquake-prone.
Answer: The Indo-Australian Plate (which carries India) and the Eurasian Plate.
(B) 2 marks What type of plate boundary is formed where the Indo-Australian Plate meets the Eurasian Plate, and what landform has it created?
Answer: A convergent boundary, where the continental part of the Indo-Australian Plate (carrying India) collides with the Eurasian Plate; this collision has pushed up the fold mountains of the Himalaya.
(C) 2 marks Suggest two precautionary measures a person living in an earthquake-prone region like this should take.
Answer: Keep heavy objects stored low and identify the safest spots in each room, such as under a sturdy table and away from windows, and keep a ready emergency kit along with a practised family evacuation plan.