Class 9 Science Chapter 4 Describing Motion Around Us NCERT Solutions in English

Contents hide

All the questions the NCERT textbook Exploration, Chapter 4, “Describing Motion Around Us,” asks inside the chapter (Think It Over, all five Pause and Ponder questions, Activities 4.1 to 4.5 and the other questions in the chapter text), in book order, then all sixteen exercise questions exactly as they are printed in the book, and The Journey Beyond, with a full model answer under each. Write your own answer first, then compare.

1 Think It Over

Think It Over

Q. How much distance should we maintain from the truck ahead to avoid a collision if it suddenly applies the brakes? Does this distance depend upon the speed with which we are moving?

Answer: We should keep at least as much distance as our vehicle needs to stop after we see the truck brake. This stopping distance has two parts: the distance covered at the original speed before we react and press the brake, and the braking distance covered while the vehicle slows down to rest.
Yes, it depends on our speed, and strongly. For braking with a constant retardation of magnitude a from speed u to rest, v² = u² + 2as gives 0 = u² − 2as, so the braking distance s = u² ÷ 2a. The braking distance is proportional to the square of the speed. For example, with a = 5 m s⁻²: at u = 20 m s⁻¹ (72 km h⁻¹), s = 400 ÷ 10 = 40 m; at u = 40 m s⁻¹, s = 1600 ÷ 10 = 160 m. Doubling the speed makes the braking distance four times, so the faster we move, the larger the gap we must keep.

2 Can distance travelled and displacement ever be equal?

In-text question

Q. (After Fig. 4.4) We find that between these two instants, the total distance travelled and the magnitude of displacement are not equal. Can these quantities ever be equal?

Answer: Yes. For motion in a straight line, the total distance travelled and the magnitude of displacement are equal if the object moves without turning back, that is, if it moves in one direction. For example, if the athlete runs from O straight to A (100 m) and stops, both are 100 m. They became unequal in Fig. 4.4 only because she turned back from A.

3 Activity 4.1: Distance and displacement of a ball thrown up

Activity 4.1

Q. As shown in Fig. 4.5, a ball is thrown vertically upwards from O. It moves up straight till B and then falls back to O. Can this be considered a motion in a straight line? For this motion, fill up the values in Table 4.1. Analyse the data filled in Table 4.1 and choose which of the following is true for displacement: (i) It is never zero. (ii) Its magnitude can be greater than the total distance travelled. (iii) Its magnitude is less than or equal to the total distance travelled. (iv) Its magnitude is less than the total distance travelled in all cases.

Answer: Yes, it is a motion in a straight line: the ball goes up and falls back along the same vertical line (Fig. 4.5 shows two lines only for clarity). From Fig. 4.5, A is at 40 cm, B at 140 cm and C at 80 cm, with C reached on the way down.

S. No. Position Total distance travelled by the ball from O till that position Displacement of the ball from O till that position
1. O 0 cm 0 cm
2. A 40 cm 40 cm in upward direction
3. B 140 cm 140 cm in upward direction
4. C 140 cm + 60 cm = 200 cm 80 cm in upward direction
5. O 140 cm + 140 cm = 280 cm 0 cm

The correct statement is (iii): the magnitude of displacement is less than or equal to the total distance travelled. It is equal at A and B (the ball has not turned back yet) and less at C and at O. Statement (i) is false because the displacement is zero at O; (ii) never happens; (iv) is false because they are equal at A and B.

4 Pause and Ponder 1 to 3: Distance travelled and displacement

Pause and Ponder 1

Q. In the example of an athlete running back and forth on a straight track (Fig. 4.4), when will the displacement of the athlete be zero? What will be the total distance travelled in that case?

Answer: The displacement is zero when the athlete comes back to her starting point O, because her final position is then the same as her initial position. If she runs from O to the far end A (100 m) and back to O, the total distance travelled is OA + AO = 100 m + 100 m = 200 m, while the displacement is 0 m.

Pause and Ponder 2

Q. Fuel used up in a vehicle depends on which of the following? Justify your answer. (i) Total distance travelled (ii) Displacement

Answer: (i) Total distance travelled. The engine burns fuel for every metre the vehicle actually moves, whatever the direction. A vehicle that goes 10 km to a market and comes back home has a displacement of zero, yet it has used fuel for 20 km of driving. Displacement only compares the starting and final positions, so it cannot measure the fuel used.

Pause and Ponder 3

Q. A ball rolls down an inclined track as shown in Fig. 4.6. Is its motion, a straight line motion? Assuming the starting point of the ball (O) to be the origin, can its motion from O to D be depicted using a horizontal line as shown in Fig. 4.3? Are the values of total distance travelled and magnitude of displacement from O equal or different at positions A, B, C and D?

Answer: Yes, it is a straight line motion, because the ball moves along the straight inclined track without changing its direction. Yes, its motion can be depicted on a single straight line with O as the origin, exactly like Fig. 4.3; the line is simply drawn along the track (tilted) instead of horizontally, and positions are measured along it. From Fig. 4.6, OA = 40 cm, AB = 10 cm, BC = 20 cm and CD = 30 cm, so the positions are A = 40 cm, B = 50 cm, C = 70 cm and D = 100 cm from O. Since the ball moves in one direction without turning back, the total distance travelled and the magnitude of displacement are equal at every position: 40 cm at A, 50 cm at B, 70 cm at C and 100 cm at D.

5 Pause and Ponder 4 and 5: Average speed and average velocity

Pause and Ponder 4

Q. During a family road trip, you drive 200 km north in three hours. Afterwards, you drive 200 km south in two hours. Find the average speed and average velocity for your entire trip.

Answer: Total distance travelled = 200 km + 200 km = 400 km; total time = 3 h + 2 h = 5 h.
Average speed = total distance ÷ time = 400 km ÷ 5 h = 80 km h⁻¹.
You end where you started, so the displacement is 0 km.
Average velocity = displacement ÷ time = 0 km ÷ 5 h = 0 km h⁻¹.

Pause and Ponder 5

Q. Under what condition(s) is the (i) magnitude of average velocity of an object equal to its average speed? (ii) magnitude of average velocity of an object zero while its average speed is not zero?

Answer: (i) When the object moves along a straight line in one direction only, without turning back. Then the total distance travelled equals the magnitude of displacement, and dividing both by the same time interval gives equal values.
(ii) When the object has moved but comes back to its starting position at the end of the time interval (for example, a swimmer completing one length and back of a pool, or the road trip above). Its displacement is zero, so its average velocity is zero, but the distance travelled is not zero, so its average speed is not zero.

6 Activity 4.2: Average acceleration of cars

Activity 4.2

Q. The magnitude of average acceleration of cars is generally specified as the time taken by the car to go from 0 km h⁻¹ to 100 km h⁻¹. Look it up on the internet and find this time for various cars, and record those in Table 4.2. Calculate the magnitude of average acceleration for each car.

Answer: First convert the final speed: 100 km h⁻¹ = 100 × 1000 m ÷ 3600 s = 27.8 m s⁻¹ (approximately). Then, for each car, magnitude of average acceleration = (27.8 m s⁻¹ − 0 m s⁻¹) ÷ (time in s). The times you find will depend on the cars you choose; a sample table:

Car type Time interval during which the speed goes from 0 to 100 km h⁻¹ Magnitude of average acceleration (m s⁻²)
Sports car 4 s 27.8 ÷ 4 ≈ 7.0
Sedan 10 s 27.8 ÷ 10 = 2.8
Small hatchback 14 s 27.8 ÷ 14 = 2.0

The shorter the time taken to reach 100 km h⁻¹, the larger the average acceleration.

7 Activity 4.3: Plotting a position-time graph

Activity 4.3

Q. On a sheet of graph paper, plot the position-time graph of a vehicle moving on a straight road using the data of Table 4.3 (time 0 s, 1 s, 2 s, 3 s, 4 s, 5 s, 6 s; position 0 m, 20 m, 40 m, 60 m, 80 m, 100 m, 120 m), taking time along the X-axis and position along the Y-axis.

Answer: Draw two perpendicular lines meeting at the origin O; the horizontal line OX is the X-axis (time) and the vertical line OY is the Y-axis (position). Choose the scale X-axis: 5 divisions = 1 s and Y-axis: 5 divisions = 20 m, and mark 1 s, 2 s, … and 20 m, 40 m, … along the axes. Plot the points (0 s, 0 m), (1 s, 20 m), (2 s, 40 m), (3 s, 60 m), (4 s, 80 m), (5 s, 100 m) and (6 s, 120 m); the first point is the origin itself. Joining them gives a straight line passing through the origin (Fig. 4.11c). The vehicle covers 20 m in every second, so it is moving with a constant velocity of 20 m s⁻¹.

8 What does the shape of a position-time graph tell us?

In-text question

Q. What does the shape of the position-time graph indicate about the nature of motion?

Answer: A straight line position-time graph (Fig. 4.13a) means the object covers equal displacements in equal intervals of time (20 m in every second), so it moves with a constant velocity. A curved graph (Fig. 4.13b) means the displacements in equal intervals keep increasing, so the velocity is not constant and the object is in accelerated motion. A straight line parallel to the time axis means the position is not changing, so the object is at rest (Example 4.6).

9 Activity 4.4: Velocity from a position-time graph

Activity 4.4

Q. In the position-time graph plotted in Fig. 4.11c, consider a part AB of the graph (Fig. 4.14). From A and B draw lines parallel to the X-axis and the Y-axis, so that a triangle ABC is formed. What do the sides BC and CA of the triangle represent? Calculate the magnitude of average velocity from the graph.

Answer: BC represents the change in position (s₂ − s₁) and CA represents the change in time (t₂ − t₁). Dividing the change in position by the change in time gives the average velocity:
v = (s₂ − s₁) ÷ (t₂ − t₁) = BC ÷ CA.
Reading the graph, at t₁ = 2 s the position s₁ = 40 m, and at t₂ = 4 s the position s₂ = 80 m, so
v = (80 m − 40 m) ÷ (4 s − 2 s) = 40 m ÷ 2 s = 20 m s⁻¹.
BC ÷ CA is the slope of the line AB. Because the graph is a straight line, any part chosen gives the same slope, 20 m s⁻¹, which shows the velocity is constant.

10 Velocity-time graphs: shape, slope and area

In-text question

Q. What does the shape of the velocity-time graph indicate about the nature of motion?

Answer: From Fig. 4.17: (a) a line parallel to the time axis means the velocity is not changing, so the velocity is constant and the acceleration is zero; (b) a straight line rising means the velocity increases by equal amounts in equal intervals of time, so the acceleration is constant and in the direction of the velocity; (c) a straight line falling means the velocity decreases by equal amounts in equal intervals of time, so the acceleration is constant and opposite to the direction of the velocity.

In-text question

Q. Can you calculate some other physical quantity from the velocity-time graph? Does the area of the shaded part represent some physical quantity?

Answer: Yes. The slope of a velocity-time graph gives the acceleration, and the area enclosed between the line and the time axis gives the displacement in that time interval. In Fig. 4.18a the shaded rectangle OABC has area = velocity × time interval = 20 m s-1 × 6 s = 120 m, which is the displacement between 0 s and 6 s.

In-text question

Q. How can you determine the displacement from the graph given in Fig. 4.18b? (Suppose you want the displacement between 10 s and 20 s, where the graph points are A and B.)

Answer: Find the area between AB and the time axis. It splits into the rectangle ACDE and the triangle ABC:
displacement = (CD × DE) + ½ × CA × BC = (5 m s-1 × 10 s) + ½ × 10 s × 5 m s-1 = 50 m + 25 m = 75 m.

11 Circular motion: distance and displacement

In-text question

Q. A child on a moving merry-go-round moves from A to B to C (Fig. 4.22). What is the distance travelled by the child? What is their displacement from their original position? What is the distance travelled in making one revolution?

Answer: The distance travelled from A to C is the length of the curve ABC, while the displacement is the straight line AC, so the two are not equal. In one full revolution the distance travelled is the circumference of the circle, 2πR, but the displacement is zero, because the child comes back to the original position. If one revolution takes time T, the average speed is 2πR/T and the average velocity over that interval is 0.

In-text question

Q. In uniform circular motion the speed is constant, but what about the direction of velocity at an instant? Is it changing? What happens if we go on increasing the number of sides of the track (Fig. 4.23)?

Answer: Yes, the direction changes. On a rectangular track the athlete changes direction 4 times in one round and on a hexagonal track 6 times. As the number of sides increases, the athlete has to turn more and more often; finally the track approaches a circle and the direction of the velocity changes continuously. So in uniform circular motion only the direction of the velocity changes, and the motion is accelerated.

12 Activity 4.5: A marble moving inside a ring

Activity 4.5

Q. Throw a marble inside a ring (such as an adhesive tape ring) placed flat on a smooth surface so that it rotates along the inner boundary of the ring. Predict what will happen if you lift the ring while the marble is moving. After one or two complete revolutions, pick up the ring without disturbing the motion of the marble. What do you observe? Does the marble continue moving in a circular motion? Or does it move in some other manner? Why does this happen?

Answer: When the ring is lifted, the marble does not continue in a circle; it moves off in a straight line. This happens because, once released, the marble continues to move in the direction in which it was moving at the instant the ring was removed. That direction is along the tangent to the circle at that point. The book gives the reason why the marble goes straight in a later chapter. This also shows that in circular motion the velocity at every point is along the tangent and its direction keeps changing, so uniform circular motion is accelerated motion.

13 Total distance and displacement: the shop and the forgotten bag

Answer, Question 1

Q. My father went to a shop from home which is located at a distance of 250 m on a straight road. On reaching there, he discovered that he forgot to carry a cloth bag. He came home to take it, went to the shop again, bought provisions and came back home. How much was the total distance travelled by him? What was his displacement from home?

Answer: He makes four one-way trips of 250 m each: home to shop, shop to home, home to shop, shop to home. Total distance travelled = 250 + 250 + 250 + 250 = 1000 m. Since he ends up back at home, exactly where he started, his displacement from home is zero.

14 Vertical distance and displacement: the four-floor climb

Answer, Question 2

Q. A student runs from the ground floor to the fourth floor of a school building to collect a book and then comes down to their classroom on the second floor. If the height of each floor is 3 m, find: (i) the total vertical distance travelled, and (ii) their displacement from the starting point.

Answer: Taking the ground floor as the reference point (0 m), the fourth floor is 4 × 3 m = 12 m above it, and the second floor is 2 × 3 m = 6 m above it.
(i) Vertical distance travelled = going up 12 m, then coming down from 12 m to 6 m, a further 6 m = 12 + 6 = 18 m.
(ii) Displacement from the starting point (ground floor) to the final position (second floor) = 6 m, in the upward direction.

15 A steady speedometer reading: can the scooter still be accelerating?

Answer, Question 3

Q. A girl is riding her scooter and finds that its speedometer reading is constant. Is it possible for her scooter to be accelerating and if so, how?

Answer: Yes, it is possible. A speedometer shows only the magnitude of the velocity, that is, the speed. If the girl is riding around a curve or a roundabout while holding this same speed, the direction of her velocity is continuously changing even though its magnitude is not. Since velocity is a vector, a change in its direction alone is a change in velocity, and a change in velocity is exactly what acceleration measures. So her scooter can be accelerating, purely because it is turning, while the speedometer reading stays perfectly constant.

16 Average acceleration and distance for a car speeding up from rest

Answer, Question 4

Q. A car starts from rest and its velocity reaches 24 m s-1 in 6 s. Find the average acceleration and the distance travelled in these 6 s.

Answer: Here u = 0, v = 24 m s-1, t = 6 s.
Average acceleration, a = (v – u) / t = (24 – 0) / 6 = 4 m s-2.
Distance, s = ut + ½at² = (0 × 6) + ½ × 4 × 6² = ½ × 4 × 36 = 72 m.

17 Deceleration and stopping time of a motorbike

Answer, Question 5

Q. A motorbike moving with initial velocity 28 m s-1 and constant acceleration stops after travelling 98 m. Find the acceleration of the motorbike and the time taken to come to a stop.

Answer: Here u = 28 m s-1, v = 0, s = 98 m.
Using v² = u² + 2as: 0 = 28² + 2 × a × 98, so 0 = 784 + 196a, which gives a = -784 / 196 = -4 m s-2 (the minus sign shows this is a deceleration, opposite to the direction of motion).
Using v = u + at: 0 = 28 + (-4)t, so t = 28 / 4 = 7 s.

18 Do two objects on parallel tracks ever share a velocity?

Answer, Question 6

Q. Fig. 4.27 shows a position-time graph of two objects A and B that are moving along the parallel tracks in the same direction. Do objects A and B ever have equal velocity? Justify your answer.

Answer: No, A and B never have equal velocity. On a position-time graph the velocity is the slope of the line. Compare the steepness of the two lines at every time: A starts from the origin and B from a position ahead of A, and A’s line is steeper than B’s throughout, both before and after the point where the two lines meet at t = 5 s. Since A’s slope is greater than B’s at every instant, A’s velocity is always greater than B’s, so their velocities are never equal.
The two lines meet at t = 5 s. That point only means A and B are at the same position at that instant (A overtakes B there); it does not mean they have the same velocity, because their slopes are still different at that point.

19 Reading a two-object position-time graph: what average velocity depends on

Answer, Question 7

Q. A graph in Fig. 4.28 shows the change in position with time for two objects A and B moving in a straight line from 0 to 10 seconds. Choose the correct option(s). (i) The average velocity of both over the 10 s time interval is equal since they have the same initial and final positions. (ii) The average speeds of both over the 10 s time interval are equal since both cover equal distance in equal time. (iii) The average speed of A over the 10 s time interval is lower than that of B since it covers a shorter distance than B in 10 seconds. (iv) The average speed of A over the 10 s time interval is greater than that of B since B’s speed is lower than A’s in some segments.

Answer: Options (i) and (ii) are correct.
(i) Correct. In Fig. 4.28, A and B start from the same position at t = 0 and reach the same position at t = 10 s, so their displacements in the 10 s interval are equal, and hence their average velocities (displacement ÷ time) are equal.
(ii) Correct. Neither graph ever slopes downward: A moves steadily and B moves slowly at first and faster later, but both always move forward along the straight line without turning back. So for each object the distance covered equals its displacement, and both cover the same distance in the same 10 s. Their average speeds are therefore equal.
(iii) Incorrect, because A does not cover a shorter distance than B; both cover the same distance.
(iv) Incorrect. B is slower than A in some segments but faster in others; average speed depends only on the total distance and the total time, which are the same for both.

20 A truck slowing down for a speed-limit sign

Answer, Question 8

Q. A truck driver driving at the speed of 54 km h-1 notices a road sign with a speed limit of 40 km h-1 for trucks. He slows down to 36 km h-1 in 36 s. What was the distance travelled by him during this time? Assume the acceleration to be constant while slowing down.

Answer: Converting: u = 54 km h-1 = 15 m s-1, v = 36 km h-1 = 10 m s-1, t = 36 s.
Using s = ½(u + v)t = ½ × (15 + 10) × 36 = ½ × 25 × 36 = 450 m.

21 Total distance over three stages: speeding up, cruising, braking

Answer, Question 9

Q. A car starts from rest and accelerates uniformly to 20 m s-1 in 5 seconds. It then travels at 20 m s-1 for 10 seconds and finally applies the brake (with uniform acceleration) to stop in 6 seconds. Find the total distance travelled.

Answer: Stage 1 (0 to 20 m s-1 in 5 s): s1 = ½(u + v)t = ½ × (0 + 20) × 5 = 50 m.
Stage 2 (constant 20 m s-1 for 10 s): s2 = 20 × 10 = 200 m.
Stage 3 (20 m s-1 to rest in 6 s): s3 = ½(20 + 0) × 6 = 60 m.
Total distance = 50 + 200 + 60 = 310 m.

22 Reaction time, braking distance and a 30 m obstacle

Answer, Question 10

Q. A bus is travelling at 36 km h-1 when the driver sees an obstacle 30 m ahead. The driver takes 0.5 seconds to react before pressing the brake. Once the brake is applied, the velocity of the bus reduces with constant acceleration of 2.5 m s-2. Will the bus be able to stop before reaching the obstacle?

Answer: First, 36 km h-1 = 10 m s-1.
Reaction distance (bus still moving at 10 m s-1 for 0.5 s before braking starts) = 10 × 0.5 = 5 m.
Braking distance: u = 10 m s-1, v = 0, a = -2.5 m s-2. Using v² = u² + 2as: 0 = 100 – 5s, so s = 20 m.
Total distance needed to stop = 5 + 20 = 25 m. Since 25 m is less than the 30 m available, yes, the bus stops in time, with 5 m to spare.

23 Is an object on Earth really at rest?

Answer, Question 11

Q. A student said, “The Earth moves around the Sun.” In this context, discuss whether an object kept on the Earth can be considered to be at rest.

Answer: Whether an object is at rest or in motion always depends on the reference point chosen; rest and motion are not absolute. If the reference point is something fixed on the Earth itself, such as a nearby wall or the ground, then an object placed on the Earth’s surface and left undisturbed does not change its position with respect to that reference point, and can correctly be called at rest. However, if the reference point is chosen outside the Earth, for instance the Sun, then the Earth itself is continuously moving along its orbit, carrying every object on its surface along with it. Measured against the Sun as the reference point, the “resting” object is therefore actually in motion. So the same object can correctly be described as both “at rest” and “in motion” at the same time, depending only on which reference point is chosen; this is exactly why specifying the reference point is the first step in describing any motion.

24 Shading displacement on a cyclist’s velocity-time graph

Answer, Question 12

Q. The velocity-time graph from 0 s to 120 s for a cyclist is shown in Fig. 4.30. Shade the areas (in different colours) representing the displacement of the cyclist (i) while cyclist is moving with constant velocity, (ii) when the velocity of cyclist is decreasing. Also, calculate the displacement and average acceleration in the 120 s time interval.

Answer: From Fig. 4.30: the velocity rises from 0 to 3 m s-1 between 0 s and 20 s, stays constant at 3 m s-1 from 20 s to 100 s, and decreases from 3 m s-1 to 2 m s-1 between 100 s and 120 s.
(i) Constant velocity (20 s to 100 s): shade the rectangle under the flat line. Displacement = 3 m s-1 × 80 s = 240 m.
(ii) Decreasing velocity (100 s to 120 s): shade the trapezium under the sloping line in a different colour. Displacement = ½ × (3 + 2) × 20 = 50 m.
Total displacement in 120 s = area of the first triangle (½ × 20 × 3 = 30 m) + 240 m + 50 m = 320 m.
Average acceleration in 120 s = (final velocity − initial velocity) ÷ time = (2 − 0) m s-1 ÷ 120 s = 1/60 m s-2 ≈ 0.017 m s-2.

25 Estimating distance from a runner’s velocity-time graph

Answer, Question 13

Q. A girl is preparing for her first marathon by running on a straight road. She uses a smartwatch to calculate her running speed at different intervals. The graph (Fig. 4.31) depicts her velocity versus time. Estimate the distance she ran based on the graph.

Answer: The distance she ran is the area between the velocity-time line and the time axis. Here velocity is in km h-1 and time in hours, so the area comes out in kilometres. Reading the plotted points of Fig. 4.31: 7 km h-1 at 0 h and 0.6 h, 7.5 km h-1 at 1.6 h and 3 h, 7 km h-1 at 4.6 h, and 6.5 km h-1 at 5.6 h and 6.6 h. Splitting the area into rectangles and trapeziums:
0 to 0.6 h: 7 × 0.6 = 4.2 km
0.6 to 1.6 h: ½ × (7 + 7.5) × 1.0 = 7.25 km
1.6 to 3.0 h: 7.5 × 1.4 = 10.5 km
3.0 to 4.6 h: ½ × (7.5 + 7) × 1.6 = 11.6 km
4.6 to 5.6 h: ½ × (7 + 6.5) × 1.0 = 6.75 km
5.6 to 6.6 h: 6.5 × 1.0 = 6.5 km
Total distance ≈ 4.2 + 7.25 + 10.5 + 11.6 + 6.75 + 6.5 = about 47 km (46.8 km). Because the values are read off a graph, an answer close to this is acceptable.

26 Displacement of a car on a state highway

Answer, Question 14

Q. On entering a state highway, a car continues to move with a constant velocity of 6 m s-1 for 2 minutes and then accelerates with a constant acceleration 1 m s-2 for 6 seconds. Find the displacement of the car on the state highway in the 2 min 6 s time interval by drawing a velocity-time graph for its motion.

Answer: On a velocity-time graph, the first 2 minutes (120 s) is a flat line at 6 m s-1, a rectangle; the next 6 s is a line rising from 6 m s-1 to 12 m s-1 at a constant slope of 1 m s-2, so the area under it is a trapezium of area (6 + 12) ÷ 2 × 6 = 54 m (a 6 × 6 rectangle plus a ½ × 6 × 6 triangle).
Rectangle (0 to 120 s): displacement = 6 × 120 = 720 m.
Next 6 s (u = 6 m s-1, a = 1 m s-2, t = 6 s): s = ut + ½at² = (6 × 6) + ½ × 1 × 6² = 36 + 18 = 54 m.
Total displacement in 2 min 6 s = 720 + 54 = 774 m.

27 Comparing two cars’ velocity-time graphs

Answer, Question 15

Q. Two cars A and B start moving with a constant acceleration from rest, in a straight line. Car A attains a velocity of 5 m s-1 in 5 s. Car B attains a velocity of 3 m s-1 in 10 s. Plot the velocity-time graphs for both the cars in the same graph. Using the graph, calculate the displacement in the two time intervals mentioned.

Answer: Car A: acceleration aA = (5 – 0) / 5 = 1 m s-2. On a velocity-time graph this is a straight line from (0 s, 0 m s-1) rising to (5 s, 5 m s-1). Its displacement over these 5 s is the area of this triangle: sA = ½(u + v)t = ½(0 + 5)(5) = 12.5 m.
Car B: acceleration aB = (3 – 0) / 10 = 0.3 m s-2. Its line rises from (0 s, 0 m s-1) to (10 s, 3 m s-1), a gentler slope than Car A’s line, since B takes longer to reach a lower velocity. Its displacement over these 10 s is: sB = ½(u + v)t = ½(0 + 3)(10) = 15 m.
To plot both graphs, use v = at to find each car’s velocity at five evenly spaced instants, for A at 0, 1.25, 2.5, 3.75, 5 s and for B at 0, 2.5, 5, 7.5, 10 s, then join the points; both lines start at the origin, but A’s line is steeper since it accelerates faster.

28 The minute hand of a clock: distance, displacement, speed and velocity

Answer, Question 16

Q. Rohan studies science from 6 PM to 7:30 PM at home. Consider the tip of the minute’s hand of the wall clock. During the given time interval, what is its: (i) distance travelled, (ii) displacement, (iii) speed, and (iv) velocity. The length of the minute’s hand is 7 cm.

Answer: The time interval is 6:00 PM to 7:30 PM, that is, 1 hour 30 minutes = 90 minutes = 5400 s. The minute hand completes one full revolution every 60 minutes, so in 90 minutes it completes 1.5 revolutions.
(i) Distance travelled by the tip = 1.5 × circumference = 1.5 × 2πr = 1.5 × 2 × π × 7 cm = 21π cm ≈ 66 cm.
(ii) Displacement: after exactly 1 full revolution the tip is back at its starting point; the extra half revolution then carries it to the point diametrically opposite the start, a straight-line distance equal to the circle’s diameter. Displacement = 2r = 2 × 7 = 14 cm, directed straight across the clock face from the starting position.
(iii) Speed = distance / time = 21π cm / 5400 s ≈ 66 / 5400 ≈ 0.0122 cm/s.
(iv) Velocity = displacement / time = 14 cm / 5400 s ≈ 0.0026 cm/s, directed from the starting point straight across to the diametrically opposite point.

29 The Journey Beyond

These are the extension tasks printed at the end of the chapter. Most are activities or projects, so the answers below give the expected observations and the reasoning; your own readings may differ.

The Journey Beyond 1

Q. Take a cardboard disc (radius ~ 8 cm). Write numbers 1 to 12 on the outer part (7 cm from the centre) and the letters ‘ABCDEF’ on the inner part (4 cm from the centre), using the same font size. Spin the disc slowly, then faster, and observe how the numbers and letters appear. Why do the numbers fade or disappear while the letters remain visible? Are the speeds of the numbers and letters the same or different? Justify your answer.

Answer: The numbers and letters go round in the same time, because they are on the same disc. In one revolution a number covers 2π × 7 = 14π cm and a letter only 2π × 4 = 8π cm. Since speed = distance ÷ time, the numbers move faster: their speed is 7/4 = 1.75 times that of the letters. So the speeds are different. When the disc spins fast, the faster-moving numbers blur and fade first, while the slower letters can still be seen.

The Journey Beyond 2

Q. Many smartphones have an inbuilt accelerometer that can detect very small accelerations. Install an app, such as Phyphox (phyphox.org) and open ‘Accelerometer (without g)’. Note the readings when (i) the phone is on an outstretched palm, and (ii) the phone is kept on the floor. What differences do you observe? What does this tell you about motion and acceleration in real situations?

Answer: This is a classroom group activity. The expected observation: (i) on an outstretched palm the readings keep changing and are not zero, because the hand makes tiny involuntary movements; (ii) on the floor the readings stay very close to zero. This tells us that an object that looks at rest may still be moving slightly and accelerating, and that in real situations velocity is rarely perfectly constant.

The Journey Beyond 3

Q. For motion in a straight line with constant acceleration, we derived two primary equations given by Eq. (4.4a) and (4.4b). Using these two equations, three more equations can be derived, out of which we derived one given in Eq. (4.4c). Derive the remaining two equations given below: s = vt − ½at² and s = ½(u + v)t. In mathematics, you have learnt the formula for calculating the area of a trapezium. Using that formula, derive the second equation given above.

Answer: (i) s = vt − ½at²: from Eq. (4.4a), v = u + at, so u = v − at. Put this in Eq. (4.4b), s = ut + ½at²:
s = (v − at)t + ½at² = vt − at² + ½at² = vt − ½at².
(ii) s = ½(u + v)t, by algebra: from v = u + at, at = v − u. Then s = ut + ½(at)t = ut + ½(v − u)t = ½(2u + v − u)t = ½(u + v)t.
(ii) by the trapezium area: on the velocity-time graph the line goes from velocity u at time 0 to velocity v at time t. The area under it is a trapezium with parallel sides u and v and width t. Area of a trapezium = ½ × (sum of parallel sides) × distance between them, so displacement s = ½(u + v)t.

The Journey Beyond 4

Q. Plot graphs for data given in Table 4.4, using different X and Y scales, on different graph papers. Compare the graphs to find how the appearance of graph is affected by the choice of scales and decide which scale is better and why. Now repeat this with any graph plotting app.

Answer: This is a practical task. The same data look steeper or flatter, and larger or smaller on the page, when the scales are changed, even though the motion is the same. That is why the steepness of two graphs drawn on different scales should not be compared directly. The better scale is the one that represents the data effectively and conveniently while using most of the available space on the graph paper (Activity 4.3, step 4). Graph plotting apps do this automatically by adjusting the axes to fit the data.

The Journey Beyond 5

Q. Talk to a motor mechanic about how a vehicle’s braking or stopping distance is affected by: (i) wet roads, (ii) worn-out tyres, (iii) higher vehicle mass, (iv) driving at night, (v) fog, (vi) severe weather (rain, snow, storm), and (vii) driver reaction time. Using this information, design safety posters for your school and prepare a short skit to present it in the assembly.

Answer: This is a project; your points will come from your talk with the mechanic. Each factor makes the distance longer. Wet roads, worn-out tyres, a heavier vehicle and severe weather mean the brakes cannot slow the vehicle as quickly, so the size of the negative acceleration is smaller and, from v² = u² + 2as, the braking distance is longer. Driving at night, in fog or in severe weather makes it harder to see a hazard early, and during the driver’s reaction time the vehicle keeps moving at its full speed (reaction distance = speed × reaction time). A poster can show the rule from this chapter: keep a safe distance from the vehicle ahead and increase it when your speed is higher or the conditions are poor.