Class 10 Maths Chapter 12 Surface Areas and Volumes Short Notes

Quick revision of Class 10 Maths Chapter 12, Surface Areas and Volumes: the two rules, every formula, and all seven NCERT solved examples at a glance.

1 The Two Rules

The core of the chapter: these two rules
Surface area ruleTSA (Total Surface Area) of a combined solid = sum of the areas of only the surfaces left on the outside. It is not the sum of the parts’ TSAs, because the joined faces are hidden.
Volume ruleVolume of a combined solid = sum of the volumes of its parts (subtract any hollow cut out of it, or any solid part raised inside a container). No material is lost on joining.
TSA and CSATotal Surface Area (all outer surface) and Curved Surface Area (curved part only; for a cuboid or cube, the 4 side walls, called the lateral surface area).

2 Class IX Formulas You Need

Solid CSA TSA Volume
Cuboid 2h(l+b)2h(l+b) 2(lb+bh+hl)2(lb+bh+hl) lbhlbh
Cube 4a24a^2 6a26a^2 a3a^3
Cylinder 2πrh2\pi rh 2πr(r+h)2\pi r(r+h) πr2h\pi r^2 h
Cone πrl\pi rl πr(l+r)\pi r(l+r) 13πr2h\tfrac13\pi r^2h
Sphere 4πr24\pi r^2 43πr3\tfrac43\pi r^3
Hemisphere 2πr22\pi r^2 3πr23\pi r^2 23πr3\tfrac23\pi r^3

l,b,hl, b, h = length, breadth, height; aa = edge; rr = radius. For a cone, hh = height and ll = slant height (the sloping side), l=r2+h2l=\sqrt{r^2+h^2}. Ring (the flat band left when a wider solid of radius rr sits on a narrower one of radius r′r', read r-dash) =π(r2−r′2)=\pi(r^2-r'^2). Take π=227\pi=\frac{22}{7} unless the question says 3.14. 11 m² =10000=10000 cm², 11 m³ =106=10^6 cm³.

3 Common Combined Solids

Object TSA Volume
Cone on hemisphere (toy) πrl+2πr2\pi rl+2\pi r^2 13πr2h+23πr3\tfrac13\pi r^2h+\tfrac23\pi r^3
Cylinder with two hemispherical ends (capsule) 2πrh+4πr22\pi rh+4\pi r^2 πr2h+43πr3\pi r^2h+\tfrac43\pi r^3
Cylinder with conical top of height h1h_1, open base (tent) 2πrh+πrl2\pi rh+\pi rl (canvas only; open base not counted) πr2h+13πr2h1\pi r^2h+\tfrac13\pi r^2h_1
Hemisphere on a cube, or cut into it 6a2+πr26a^2+\pi r^2 (both cases) on top: a3+23πr3a^3+\tfrac23\pi r^3; cut in: a3−23πr3a^3-\tfrac23\pi r^3
Conical (cone-shaped) hollow cut from a cylinder of the same rr, hh 2πrh+πr2+πrl2\pi rh+\pi r^2+\pi rl 23πr2h\tfrac23\pi r^2h
Hemisphere scooped from each end of a cylinder 2πrh+4πr22\pi rh+4\pi r^2 πr2h−43πr3\pi r^2h-\tfrac43\pi r^3

4 The Seven Solved Examples at a Glance

Example Solids Key working Answer
1. Rasheed’s playing top cone + hemisphere r=1.75r=1.75, cone h=3.25h=3.25, l≈3.7l\approx3.7; πr(2r+l)\pi r(2r+l) ≈ 39.6 cm²
2. Decorative block cube + hemisphere 150−πr2+2πr2=150+πr2150-\pi r^2+2\pi r^2=150+\pi r^2, r=2.1r=2.1 163.86 cm²
3. Toy rocket cone on narrower cylinder cone (orange) πrl+π(r2−r′2)\pi rl+\pi(r^2-r'^2); cylinder of radius r′r', height h′h' (yellow) πr′(2h′+r′)\pi r'(2h'+r') 63.585 cm², 195.465 cm²
4. Mayank’s bird-bath cylinder + hemispherical depression 2πr(h+r)2\pi r(h+r), r=30r=30, h=145h=145 cm 33000 cm² = 3.3 m²
5. Shanta’s shed cuboid + half cylinder 840+288.75840+288.75; minus 300+1.6300+1.6 1128.75 m³; air 827.15 m³
6. Juice glass cylinder − hemisphere 196.25−32.71196.25-32.71 apparent 196.25 cm³, actual 163.54 cm³
7. Toy in a cylinder hemisphere + cone; circumscribing cylinder toy 23πr3+13πr2h\tfrac23\pi r^3+\tfrac13\pi r^2h; cylinder r=2r=2, height 4 25.12 cm³; difference 25.12 cm³

5 Remember in the Exam

Last-minute checks
  • Joined faces are hidden: never add the TSAs of the parts
  • Different radii at a joint: add the ring π(r2−r′2)\pi(r^2-r'^2)
  • A cavity or depression removes a flat face but adds a curved one, so surface area can go up
  • Use the hemisphere’s CSA 2πr22\pi r^2 (not 3πr23\pi r^2) when it is joined to another solid
  • Subtract the hemisphere’s depth (equal to its radius) or the cone’s height from the total height to get the other part’s height
  • Bring every length to one unit before using a formula; write cm², m² for area and cm³, m³ for volume