Class 11 Economics (Microeconomics) Chapter 3 Production and Costs NCERT Solutions in English

Complete answers to all 30 exercises of NCERT Introductory Microeconomics, Chapter 3 “Production and Costs” (Reprint 2026-27). Questions are given exactly as printed in the English edition. Numericals follow the CBSE marking-scheme layout: given, formula, substitution, answer with unit, and what the answer means.

Board note: CBSE teaches this book in Class 11; UP, Bihar, Rajasthan and MP Boards teach it in Class 12 Microeconomics. Questions 9-11, 21 and 28-30 are on returns to scale and long run costs, which are not in the CBSE 2026-27 syllabus.

1 Production function and product (Questions 1-8)

Question 1

Q. “Explain the concept of a production function.”

Answer:

  • The production function of a firm is a relationship between inputs used and output produced; for various quantities of inputs it gives the maximum quantity of output that can be produced: $q = f(L, K)$
  • Example: a farmer with 1 hectare of land and 2 hours of labour a day produces at most 2 tonnes of wheat; one possible form is $q = K \times L$
  • Because it takes the maximum output, it deals only with the efficient use of inputs: no more output can be had from the same inputs
  • It is defined for a given technology; if technology improves, maximum output from each input combination rises and we get a new production function
Question 2

Q. “What is the total product of an input?”

Answer: If we vary one input and keep all other inputs constant, the relationship between that variable input and output is the total product (TP) of the input. It is also called the total return or total physical product. Example: with capital fixed at 4 in Table 3.1, TP of labour is 10, 24, 40, 50, 56, 57.

Question 3

Q. “What is the average product of an input?”

Answer: Average product is output per unit of the variable input: $AP_L = \dfrac{TP_L}{L}$. Example: at L = 3, TP = 40, so AP = 40/3 = 13.33. AP at any level is also the average of all marginal products up to that level.

Question 4

Q. “What is the marginal product of an input?”

Answer: Marginal product is the change in output per unit of change in the input when all other inputs are held constant: $MP_L = \dfrac{\Delta TP_L}{\Delta L} = TP_L – TP_{L-1}$. Example: when L goes from 1 to 2, TP goes from 10 to 24, so the MP of the 2nd unit = 14. MP is undefined at zero input.

Question 5

Q. “Explain the relationship between the marginal products and the total product of an input.”

Answer:

  • TP is the sum of marginal products: adding the MP of every unit up to a level gives TP at that level. Table 3.2: 10 + 14 + 16 + 10 + 6 + 1 = 57 = TP at L = 6
  • MP is the rate at which TP rises: when MP rises, TP rises at an increasing rate; when MP falls but stays positive, TP rises at a diminishing rate
  • When MP = 0, TP is maximum; when MP is negative, TP falls
Question 6

Q. “Explain the concepts of the short run and the long run.”

Answer:

  • Short run: at least one factor (labour or capital) cannot be varied and remains fixed (fixed factor); to change output the firm can vary only the other factor (variable factor)
  • Long run: all factors of production can be varied; there is no fixed factor; the firm can vary both inputs simultaneously
  • The long run is generally a longer period than the short run for a given process, but it differs between processes. So it is not advisable to define them in days, months or years; the test is whether all inputs can be varied
Question 7

Q. “What is the law of diminishing marginal product?”

Answer: If one factor is held fixed and the other is increased, the marginal product of the variable factor first rises but, after a certain level of employment, starts falling. In Table 3.2, MP is 10, 14, 16 (rising up to the 3rd unit) and then 10, 6, 1 (falling). The book also calls this the law of variable proportions.

Question 8

Q. “What is the law of variable proportions?”

Answer:

  • Law: the marginal product of a factor input initially rises with its employment level, but after reaching a certain level it starts falling
  • Reason, factor proportions: with one factor fixed and the other increasing, their ratio changes. At first it becomes more suitable for production (MP rises); later the process becomes too crowded with the variable input (MP falls)
  • Example: a farmer with 4 hectares; with one worker there is too much land; as workers are added MP rises; from the fourth worker the land gets crowded and MP falls
  • The CBSE supplement splits it into three phases: MP rising (TP at an increasing rate), MP falling but positive (TP at a diminishing rate), MP negative (TP falls)

2 Returns to scale (Questions 9-11)

Question 9

Q. “When does a production function satisfy constant returns to scale?”

Answer: When a proportional increase in all inputs raises output by the same proportion. Mathematically, increasing both inputs t times (t > 1): $f(tx_1, tx_2) = t \cdot f(x_1, x_2)$. Example: inputs doubled ⇒ output exactly doubled. In a Cobb-Douglas function $q = x_1^{\alpha} x_2^{\beta}$ this happens when α + β = 1.

Question 10

Q. “When does a production function satisfy increasing returns to scale?”

Answer: When a proportional increase in all inputs raises output by a larger proportion: $f(tx_1, tx_2) \gt t \cdot f(x_1, x_2)$. Inputs doubled ⇒ output more than doubled. In Cobb-Douglas, α + β > 1.

Question 11

Q. “When does a production function satisfy decreasing returns to scale?”

Answer: When a proportional increase in all inputs raises output by a smaller proportion: $f(tx_1, tx_2) \lt t \cdot f(x_1, x_2)$. Inputs doubled ⇒ output less than doubled. In Cobb-Douglas, α + β < 1.

3 Costs and cost curves (Questions 12-21)

Question 12

Q. “Briefly explain the concept of the cost function.”

Answer: A given output can usually be produced with several input combinations (in Table 3.1, 50 units with (6L, 3K), (4L, 4K) or (3L, 6K)). With input prices given, the firm chooses the least expensive one. So the cost function describes the least cost of producing each level of output, given the prices of factors of production and technology.

Question 13

Q. “What are the total fixed cost, total variable cost and total cost of a firm? How are they related?”

Answer:

  • Total fixed cost (TFC): the cost of employing the fixed inputs in the short run; it stays the same whatever the output (even at zero output)
  • Total variable cost (TVC): the cost of employing the variable inputs; it rises with output and is zero at zero output
  • Total cost (TC): their sum, $TC = TFC + TVC$. The TC curve runs exactly TFC above the TVC curve (vertical sum)
  • Example (Table 3.3): TFC = Rs 20, at q = 2 TVC = Rs 18, TC = Rs 38
Question 14

Q. “What are the average fixed cost, average variable cost and average cost of a firm? How are they related?”

Answer:

  • $AFC = \dfrac{TFC}{q}$: fixed cost per unit of output
  • $AVC = \dfrac{TVC}{q}$: variable cost per unit of output
  • $SAC = \dfrac{TC}{q}$: total cost per unit of output
  • Relation: dividing TC = TFC + TVC by q gives $SAC = AFC + AVC$. Example (Table 3.3, q = 1): 20 + 10 = 30
Question 15

Q. “Can there be some fixed cost in the long run? If not, why?”

Answer: No. In the long run all inputs are variable, so there is no fixed factor and hence no fixed cost. In the long run total cost and total variable cost coincide.

Question 16

Q. “What does the average fixed cost curve look like? Why does it look so?”

Answer:

  • The AFC curve is a downward sloping rectangular hyperbola
  • Why: AFC = TFC/q and TFC is a constant, so as q increases AFC decreases
  • When output is very close to zero AFC is arbitrarily large; as output moves towards infinity AFC moves towards zero, but never touches the axis
  • Multiplying any q by its AFC always gives the same constant, TFC; a curve with this property is a rectangular hyperbola. At q1, TFC = AFC × q1 = area of rectangle OFCq1, the same at every point
CostOutput (q)AFCCFq₁TFC(a) Average fixed costCostOutput (q)TFCAFq₀θ(b) Total fixed cost
Figure 1: (a) The average fixed cost (AFC) curve is a rectangular hyperbola; the area of rectangle OFCq₁ is TFC (Fig. 3.4). (b) The total fixed cost curve: the slope of ray OA, tanθ = Aq₀/Oq₀, is AFC at q₀ (Fig. 3.5)
Question 17

Q. “What do the short run marginal cost, average variable cost and short run average cost curves look like?”

Answer:

  • All three are U-shaped
  • SMC first falls and then rises (law of variable proportions); for the first unit SMC = AVC
  • The SMC curve cuts the AVC curve from below at its minimum point P (output q1)
  • SAC lies above AVC (gap = AFC); the SMC curve cuts SAC from below at its minimum point S (output q2); q2 > q1
CostOutput (q)SMCAVCSACPSq₁q₂
Figure 2: Short run cost curves: short run marginal cost (SMC), average variable cost (AVC) and short run average cost (SAC) are all U-shaped; SMC cuts AVC from below at its minimum P (output q₁) and SAC from below at its minimum S (output q₂) (Fig. 3.8)
Question 18

Q. “Why does the SMC curve cut the AVC curve at the minimum point of the AVC curve?”

Answer:

  • AVC is the average of marginal costs (TVC = sum of SMCs); for the first unit SMC = AVC
  • As long as AVC is falling, the cost of the extra unit (SMC) must be below the average, otherwise the average could not fall
  • When AVC is rising, SMC must be above the average
  • So SMC crosses from below AVC to above it exactly where AVC is neither falling nor rising, that is, at the minimum point of AVC
Question 19

Q. “At which point does the SMC curve cut the SAC curve? Give reason in support of your answer.”

Answer: The SMC curve cuts the SAC curve from below at its minimum point (S in the book’s Fig 3.8). Reason: as long as SAC is falling, SMC < SAC; when SAC is rising, SMC > SAC. So SMC = SAC exactly where SAC is minimum. This point lies to the right of P, the minimum of AVC.

Question 20

Q. “Why is the short run marginal cost curve ‘U’-shaped?”

Answer:

  • Because of the law of variable proportions: at first the MP of the variable factor rises, so each extra unit of output needs less of the factor; with the factor price given, SMC falls
  • After a point MP falls, so each extra unit needs more of the factor; SMC rises
  • So SMC first falls and then rises: a U shape. At zero output SMC is undefined
Question 21

Q. “What do the long run marginal cost and the average cost curves look like?”

Answer:

  • LRAC is U-shaped: increasing returns to scale at first (LRAC falls), then constant returns (the minimum point), then decreasing returns (LRAC rises)
  • LRMC is also U-shaped: for the first unit LRMC = LRAC; while LRAC falls LRMC < LRAC, while it rises LRMC > LRAC
  • LRMC cuts LRAC from below at its minimum point M (output q1)
CostOutput (q)LRMCLRACMq₁IRS: LRAC fallsCRSDRS: LRAC rises
Figure 3: Long run cost curves: long run average cost (LRAC) and long run marginal cost (LRMC) are U-shaped; LRMC cuts LRAC from below at its minimum M (output q₁). The falling part goes with increasing, M with constant and the rising part with decreasing returns to scale (Fig. 3.9)

4 Numerical questions (Questions 22-30)

Question 22

Q. “The following table gives the total product schedule of labour. Find the corresponding average product and marginal product schedules of labour.”

Formula: $AP_L = \dfrac{TP_L}{L}$; $MP_L = TP_L – TP_{L-1}$ (½)

L TPL APL MPL
0 0 – –
1 15 15 15
2 35 17.5 20
3 50 16.67 15
4 40 10 −10
5 48 9.6 8

Meaning: TP falls from 50 to 40 at the 4th unit, so its MP is negative (−10). AP is highest (17.5) at L = 2, up to which MP > AP.

Question 23

Q. “The following table gives the average product schedule of labour. Find the total product and marginal product schedules. It is given that the total product is zero at zero level of labour employment.”

Formula: $TP_L = AP_L \times L$; $MP_L = TP_L – TP_{L-1}$, with $TP_0 = 0$ (½)

L APL TP = AP × L MPL
1 2 2 2
2 3 6 4
3 4 12 6
4 4.25 17 5
5 4 20 3
6 3.5 21 1

Meaning: MP rises up to the 3rd unit (2, 4, 6) and then falls (5, 3, 1): the law of variable proportions.

Question 24

Q. “The following table gives the marginal product schedule of labour. It is also given that total product of labour is zero at zero level of employment. Calculate the total and average product schedules of labour.”

Formula: $TP_L = TP_{L-1} + MP_L$ (sum of marginal products), $TP_0 = 0$; $AP_L = \dfrac{TP_L}{L}$ (½)

L MPL TPL APL
1 3 3 3
2 5 8 4
3 7 15 5
4 5 20 5
5 3 23 4.6
6 1 24 4

Meaning: at L = 4, MP = AP = 5, where AP is at its maximum (5).

Question 25

Q. “The following table shows the total cost schedule of a firm. What is the total fixed cost schedule of this firm? Calculate the TVC, AFC, AVC, SAC and SMC schedules of the firm.”

  • TFC = TC at q = 0 = Rs 10, and it stays Rs 10 at every output (TFC schedule: 10, 10, 10, …) (1)
  • Formulas: TVC = TC − TFC; AFC = TFC/q; AVC = TVC/q; SAC = TC/q; SMC = TCq − TCq−1 (½)
Q TC TFC TVC AFC AVC SAC SMC
0 10 10 0 – – – –
1 30 10 20 10 20 30 20
2 45 10 35 5 17.5 22.5 15
3 55 10 45 3.33 15 18.33 10
4 70 10 60 2.5 15 17.5 15
5 90 10 80 2 16 18 20
6 120 10 110 1.67 18.33 20 30

(All values in Rs.) Meaning: AVC is lowest (Rs 15) at Q = 3-4, and at Q = 4 SMC = AVC = Rs 15; SAC is lowest (Rs 17.5) at Q = 4. Check: AFC + AVC = SAC in every row.

Question 26

Q. “The following table gives the total cost schedule of a firm. It is also given that the average fixed cost at 4 units of output is Rs 5. Find the TVC, TFC, AVC, AFC, SAC and SMC schedules of the firm for the corresponding values of output.”

  • TFC = AFC × q = 5 × 4 = Rs 20 (at every output) (1)
  • At q = 0, TC = TFC = Rs 20, so SMC of the first unit = 50 − 20 = Rs 30 (½)
Q TC TFC TVC AFC AVC SAC SMC
1 50 20 30 20 30 50 30
2 65 20 45 10 22.5 32.5 15
3 75 20 55 6.67 18.33 25 10
4 95 20 75 5 18.75 23.75 20
5 130 20 110 4 22 26 35
6 185 20 165 3.33 27.5 30.83 55

(All values in Rs.) Check: in every row AFC + AVC = SAC (e.g. Q = 4: 5 + 18.75 = 23.75).

Question 27

Q. “A firm’s SMC schedule is shown in the following table. The total fixed cost of the firm is Rs 100. Find the TVC, TC, AVC and SAC schedules of the firm.”

As the question says, the values in the table (500, 300, 200, 300, 500, 800) are SMC. Formulas: TVC = sum of SMCs; TC = TVC + 100; AVC = TVC/Q; SAC = TC/Q (½)

Q SMC TVC TC AVC SAC
0 – 0 100 – –
1 500 500 600 500 600
2 300 800 900 400 450
3 200 1,000 1,100 333.33 366.67
4 300 1,300 1,400 325 350
5 500 1,800 1,900 360 380
6 800 2,600 2,700 433.33 450

(All values in Rs.) Meaning: AVC (325) and SAC (350) are both lowest at Q = 4; at Q = 5 SMC (500) is above both, so both start rising.

Question 28

Q. “Let the production function of a firm be $Q = 5L^{\frac{1}{2}}K^{\frac{1}{2}}$. Find out the maximum possible output that the firm can produce with 100 units of L and 100 units of K.”

  • Given: L = 100, K = 100 (½)
  • $Q = 5 \times \sqrt{100} \times \sqrt{100} = 5 \times 10 \times 10$ (1)
  • Answer: maximum output = 500 units (½)
  • (½ + ½ = 1, so this function shows constant returns to scale)
Question 29

Q. “Let the production function of a firm be $Q = 2L^2K^2$. Find out the maximum possible output that the firm can produce with 5 units of L and 2 units of K. What is the maximum possible output that the firm can produce with zero unit of L and 10 units of K?”

  • L = 5, K = 2: $Q = 2 \times 5^2 \times 2^2 = 2 \times 25 \times 4 =$ 200 units (1)
  • L = 0, K = 10: $Q = 2 \times 0^2 \times 10^2 =$ 0 (1)
  • Meaning: both inputs are necessary in this function; with zero labour no amount of capital produces output
Question 30

Q. “Find out the maximum possible output for a firm with zero unit of L and 10 units of K when its production function is $Q = 5L + 2K$”

  • $Q = 5 \times 0 + 2 \times 10$ (1)
  • Answer: 20 units (½)
  • Meaning: in this linear function the inputs substitute for each other, so output is possible even with one input at zero (compare Question 29) (½)