Class 11 Economics (Microeconomics) Chapter 3 Production and Costs Notes in English

Covers T.R. Jain & V.K. Ohri (2026-27) ch 7-8. Based on NCERT Introductory Microeconomics, Chapter 3 (Reprint 2026-27), the CBSE curriculum 2026-27 (Unit 6) and the CBSE Supplementary Reading Material.

Board note: CBSE teaches this book in Class 11; UP, Bihar, Rajasthan and MP Boards teach it in Class 12 Microeconomics.

In this chapter you will learn
  • What a production function is, and the meaning of the short run and the long run
  • How to find total, average and marginal product and how they are related
  • The law of variable proportions (returns to a factor) and its three phases
  • How to fill total, average and marginal cost tables and draw their curves
  • Why the SMC curve cuts AVC and SAC at their minimum points
  • Returns to scale and long run cost curves (for state boards)
production functioninputsoutputisoquantshort runlong runfixed factorvariable factortotal productaverage productmarginal productlaw of diminishing marginal productlaw of variable proportionsfactor proportionsreturns to scaleCobb-Douglas production functioncost functiontotal fixed costtotal variable costaverage fixed costaverage variable costshort run average costshort run marginal costrectangular hyperbolalong run average costlong run marginal cost

1 Production, the firm and profit

After the consumer comes the producer (the firm): how many inputs it needs for a given output, and how its costs change as output changes.

Learn by heartDefinition 1

Production is the process by which inputs are transformed into output. Production is carried out by producers or firms.

1

Tailor

Sewing machine, cloth, thread and his own labour ⇒ shirts

2

Farmer

Land, labour, a tractor, seed, fertilizer, water ⇒ wheat

3

Car manufacturer

Land for a factory, machinery, labour, steel, aluminium, rubber ⇒ cars

4

Rickshaw puller / domestic helper

Rickshaw and labour ⇒ rickshaw rides; her own labour ⇒ cleaning services

  • The output can be consumed by consumers, or used by other firms for further production
  • Simplifying assumptions: production is instantaneous, so no time elapses between combining the inputs and producing the output; the terms production and supply are used synonymously
  • To acquire inputs a firm pays for them: this is the cost of production. Selling the output earns revenue
  • Profit = revenue − cost; the firm’s objective is assumed to be the maximum profit it can earn
  • So we study the input-output relation first and then the cost structure, to identify the output at which profit is maximum (next chapter)

2 The production function

Learn by heartDefinition 2

The production function of a firm is a relationship between inputs used and output produced by the firm. For various quantities of inputs used, it gives the maximum quantity of output that can be produced.

Book example: the farmer
  • The farmer uses only two inputs: land and labour
  • With 2 hours of labour a day and 1 hectare of land he produces a maximum of 2 tonnes of wheat
  • One possible form: q=K×Lq = K \times L, where q = wheat produced, K = land in hectares, L = hours of work a day. Check: 1×2=21 \times 2 = 2 tonnes
  • If either K or L increases, q increases; for any L and any K there is only one q
  • Efficient use: the production function takes the maximum output, so it deals only with the efficient use of inputs. Efficiency means it is not possible to get any more output from the same inputs
  • Technology: a production function is defined for a given technology. If technology improves, the maximum output from each input combination rises and we have a new production function
  • The inputs used in production are the factors of production. Here we take two: labour (L) and capital (K)
Production function
q=f(L,K)q = f(L, K)    (3.1)

q = the maximum output that can be produced with different combinations of labour L and capital K

Table 3.1: Production Function (left column labour, top row capital)

Labour \ Capital 0 1 2 3 4 5 6
0 0 0 0 0 0 0 0
1 0 1 3 7 10 12 13
2 0 3 10 18 24 29 33
3 0 7 18 30 40 46 50
4 0 10 24 40 50 56 57
5 0 12 29 46 56 58 59
6 0 13 33 50 57 59 60
  • Moving right along a row, capital increases; moving down a column, labour increases
  • Reading it: 1L, 1K ⇒ at most 1 unit; 2L, 2K ⇒ 10 units; 3L, 2K ⇒ 18 units
  • In this example both inputs are necessary: if either input is zero, output is zero (first row and first column)
  • With both inputs positive, output is positive; increasing any input increases output

3 Isoquant (Not in CBSE 2026-27 syllabus)

Learn by heartDefinition 3

An isoquant is the set of all possible combinations of the two inputs that yield the same maximum possible level of output. Each isoquant represents a particular level of output and is labelled with that output.

  • It is like the indifference curve of Chapter 2; an alternative way of representing the production function
  • In Table 3.1, 10 units can be produced in three ways: (4L, 1K), (2L, 2K), (1L, 4K); all three lie on the isoquant q = 10
  • On the isoquant q = 50: (6L, 3K), (4L, 4K), (3L, 6K)
  • Diagram: L on the X axis, K on the Y axis; (L1, K2) and (L2, K1) give the same output q1; fixing capital at K1 and raising labour to L3 reaches the higher isoquant q2
  • Negative slope: when marginal products are positive, with more of one input the same output can be produced only with less of the other
Figure 1: Isoquants for three output levels q₁, q₂, q₃; (L₁, K₂) and (L₂, K₁) give the same output q₁; holding capital at K₁ and raising labour to L₃ reaches the higher output q₂
Figure 1: Isoquants for three output levels q₁, q₂, q₃; (L₁, K₂) and (L₂, K₁) give the same output q₁; holding capital at K₁ and raising labour to L₃ reaches the higher output q₂

4 The short run and the long run

Learn by heartDefinition 4

In the short run, at least one of the factors (labour or capital) cannot be varied and remains fixed. To vary output, the firm can vary only the other factor.

Learn by heartDefinition 5

The factor that remains fixed in the short run is the fixed factor; the factor the firm can vary is the variable factor.

Learn by heartDefinition 6

In the long run, all factors of production can be varied; the firm may vary both inputs simultaneously, so there is no fixed factor.

Short run

  • At least one factor fixed
  • Both fixed and variable factors
  • Output changes only by changing the variable factor
  • Fixed costs exist
  • Example: in Table 3.1 with capital fixed at 4 units, the capital = 4 column

Long run

  • All factors variable
  • No fixed factor
  • The firm can change all inputs together
  • No fixed costs
  • For a given process, generally a longer period than the short run
Exam tip

It is not advisable to define the short run and the long run in terms of days, months or years. The long run differs from one production process to another. The test is only this: can all the inputs be varied or not.

5 Total product, average product and marginal product

5.1 Total product

Learn by heartDefinition 7

If we vary a single input and keep all other inputs constant, the relationship between the variable input and output is the total product (TP) of the variable input. It is also called the total return or total physical product of the variable input.

In Table 3.1 fix capital at 4 units and move down the capital = 4 column: this is the total product of labour (second column of Table 3.2).

5.2 Average product

Learn by heartDefinition 8

Average product (AP) is output per unit of the variable input: APL=TPLLAP_L = \dfrac{TP_L}{L}  (3.2)

5.3 Marginal product

Learn by heartDefinition 9

The marginal product (MP) of an input is the change in output per unit of change in the input when all other inputs are held constant: MPL=change in outputchange in input=ΔTPLΔLMP_L = \dfrac{\text{change in output}}{\text{change in input}} = \dfrac{\Delta TP_L}{\Delta L}  (3.3)

Unit-by-unit form
MPL=(TP at L units)−(TP at L−1 units)MP_L = (TP \text{ at } L \text{ units}) – (TP \text{ at } L – 1 \text{ units})  (3.4)

Example: when L changes from 1 to 2, TP changes from 10 to 24; change in TP = 24 − 10 = 14, change in L = 1, so the MP of the 2nd unit of labour = 14/1 = 14

Table 3.2: Total Product, Marginal Product and Average Product (capital fixed at 4)

Labour (L) TP MPL APL
0 0 – –
1 10 10 10
2 24 14 12
3 40 16 13.33
4 50 10 12.5
5 56 6 11.2
6 57 1 9.5
  • Inputs cannot take negative values, so marginal product is undefined at zero input
  • TP = sum of marginal products: adding the MP of every unit up to a level gives TP at that level. Check: 10 + 14 + 16 + 10 + 6 + 1 = 57
  • AP = average of the marginal products: at L = 3, (10 + 14 + 16) ÷ 3 = 40 ÷ 3 = 13.33
  • Average and marginal products are also called the average and marginal returns to the variable input
Worked example 1: TP and MP from AP
Given

AP = 10 at L = 4, AP = 12 at L = 5

To find

MP of the 5th unit

  • Formula: TP=AP×LTP = AP \times L (½)
  • TP at L = 4 = 10 × 4 = 40; TP at L = 5 = 12 × 5 = 60 (1)
  • MP5=TP5−TP4=60−40=MP_5 = TP_5 – TP_4 = 60 – 40 = 20 units (½)
  • Meaning: MP (20) is above the previous AP (10), which is why AP rose from 10 to 12
Common mistakes
  • Taking TP ÷ L as MP is wrong; that is AP. MP uses the change in TP
  • Adding up APs to get TP is wrong; TP = AP × L. To get TP from MPs you add the MPs
  • Writing MP = 0 at L = 0 is wrong; it is undefined

6 The law of diminishing marginal product and the law of variable proportions

  • In Table 3.2, TP rises as labour rises, but not at a constant rate; the rate at which TP rises is shown by MP
  • MP first rises (up to 3 units of labour: 10, 14, 16) and then falls (10, 6, 1)
Learn by heartDefinition 10

The law of variable proportions (or the law of diminishing marginal product): the marginal product of a factor input initially rises with its employment level, but after reaching a certain level of employment, it starts falling.

Learn by heartDefinition 11

Factor proportions represent the ratio in which the two inputs are combined to produce output.

CauseHold one factor fixed and keep increasing the other: factor proportions change
↓
At firstAs the variable input increases, factor proportions become more and more suitable for production, so MP rises
↓
LaterAfter a certain level the production process becomes too crowded with the variable input, so MP falls
Book example: the farmer with 4 hectares
  • Take Table 3.2 as the output of a farmer with 4 hectares of land who can choose how much labour to use
  • With only 1 worker there is too much land for one worker to cultivate alone
  • As workers increase, labour per unit of land rises and each worker adds proportionally more to total output: MP rises
  • When the fourth worker is hired, the land begins to get crowded; each worker has too little land to work efficiently, so each extra worker adds proportionally less: MP starts falling (16 to 10)

7 Returns to a factor: the three phases of the law of variable proportions

The CBSE curriculum lists “Returns to a Factor”. The CBSE Supplementary Reading Material explains it in three phases (phase 1, 2, 3) of TP and MP; the last column of the table gives the names these phases commonly go by:

Phase MP TP Name
Phase I MP rises TP rises at an increasing rate (curve convex from below) increasing returns to a factor
Phase II MP falls but stays positive TP rises at a diminishing rate; TP is maximum where MP = 0 diminishing returns to a factor
Phase III MP negative TP falls negative returns to a factor
Worked example 2: identify the phases

Capital is fixed and labour is increased:

L 1 2 3 4 5 6 7 8
TP 8 20 36 48 56 60 60 56
MP = TPL − TPL−1 8 12 16 12 8 4 0 −4
AP = TP/L 8 10 12 12 11.2 10 8.57 7
  • Phase I: L = 1 to 3 (MP rises 8 → 12 → 16)
  • Phase II: L = 4 to 7 (MP 12 → 8 → 4 → 0, falling but not negative); at L = 7, MP = 0 and TP stays at its maximum of 60
  • Phase III: L = 8 (MP = −4, TP falls from 60 to 56)
  • Note: at L = 4, MP = AP = 12, and this is where AP is at its maximum (12)
Figure 2: Three phases of the law of variable proportions: (a) TP rises at an increasing rate up to A, then at a diminishing rate, peaks at B and falls; (b) MP is highest at A's level of labour, cuts AP from above at AP's maximum P, and is zero at B's level of labour, negative after it
Figure 2: Three phases of the law of variable proportions: (a) TP rises at an increasing rate up to A, then at a diminishing rate, peaks at B and falls; (b) MP is highest at A’s level of labour, cuts AP from above at AP’s maximum P, and is zero at B’s level of labour, negative after it
Exam tip

In the diagram, A is where TP rises fastest (MP is at its maximum); after A, TP rises at a diminishing rate. At B TP is maximum, and at exactly that L, MP is zero. At P, MP cuts AP from above, where AP is maximum.

8 Shapes of the TP, MP and AP curves

  • TP curve (book Fig 3.1): raising one input with others constant raises output, so the TP curve in the input-output plane is positively sloped. Labour on the horizontal axis, output on the vertical axis; with L units of labour the firm can at most produce q1
  • The book’s positive slope is the range where MP is positive; the supplement’s phase III (MP negative) adds the falling part of TP beyond it
  • MP curve: by the law of variable proportions MP first rises and then falls, so the MP curve is an inverse ‘U’ (Fig 3.2)
  • AP curve: for the first unit MP = AP. As MP rises, AP also rises, but less than MP. Even after MP starts falling, AP keeps rising as long as MP > AP. Once MP falls below AP, AP also falls. So the AP curve is also an inverse ‘U’
Situation AP MP compared with AP
AP rising (left of AP’s maximum) rising MP > AP
AP at its maximum (at L in book Fig 3.2) peak MP = AP
AP falling (to the right) falling MP < AP
Learn by heartDefinition 12

The MP curve cuts the AP curve from above at the maximum point of AP. Reason: AP can rise only if MP is above AP, and AP falls only when MP is below AP.

Common mistakes
  • “Once MP starts falling, AP falls too” is wrong; AP rises as long as MP > AP (in Figure 2, MP peaks at A’s level of labour, L = 4, yet AP keeps rising until P, at L = 6)
  • “MP cuts AP from below” is wrong; for product curves MP cuts from above (for cost curves MC cuts from below)

9 Returns to scale (Not in CBSE 2026-27 syllabus)

The law of variable proportions arises because factor proportions change when one factor is held constant and the other is increased. Both factors can change only in the long run. One special case: both factors increased in the same proportion (factors scaled up).

1

Constant returns to scale (CRS)

A proportional increase in all inputs raises output by the same proportion. Inputs doubled ⇒ output doubled

2

Increasing returns to scale (IRS)

Output rises by a larger proportion. Inputs doubled ⇒ output more than doubled

3

Decreasing returns to scale (DRS)

Output rises by a smaller proportion. Inputs doubled ⇒ output less than doubled

Mathematical form (book box)

q=f(x1,x2)q = f(x_1, x_2); increase both factors t times (t>1t \gt 1):

CRS: f(tx1,tx2)=t⋅f(x1,x2)f(tx_1, tx_2) = t \cdot f(x_1, x_2)    IRS: f(tx1,tx2)>t⋅f(x1,x2)f(tx_1, tx_2) \gt t \cdot f(x_1, x_2)    DRS: f(tx1,tx2)<t⋅f(x1,x2)f(tx_1, tx_2) \lt t \cdot f(x_1, x_2)

Cobb-Douglas production function

Learn by heartDefinition 13

q=x1αx2βq = x_1^{\alpha} x_2^{\beta}, where α and β are constants, is called a Cobb-Douglas production function.

q0=x1αx2βq_0 = x_1^{\alpha} x_2^{\beta}output at the original inputs
q1=(tx1)α(tx2)βq_1 = (tx_1)^{\alpha} (tx_2)^{\beta}both inputs t times
q1=tα+βx1αx2β=tα+βq0q_1 = t^{\alpha + \beta} x_1^{\alpha} x_2^{\beta} = t^{\alpha + \beta} q_0law of indices
α+β=1⇒q1=tq0\alpha + \beta = 1 \Rightarrow q_1 = t q_0 (CRS); α+β>1\alpha + \beta \gt 1 (IRS); α+β<1\alpha + \beta \lt 1 (DRS)compare the power of t with 1
Worked example 3
  • q=L0.6K0.4q = L^{0.6} K^{0.4}: 0.6 + 0.4 = 1 ⇒ CRS
  • q=L0.7K0.5q = L^{0.7} K^{0.5}: 0.7 + 0.5 = 1.2 > 1 ⇒ IRS
  • q=L0.3K0.4q = L^{0.3} K^{0.4}: 0.3 + 0.4 = 0.7 < 1 ⇒ DRS
  • Q=2L2K2Q = 2L^2K^2: 2 + 2 = 4 ⇒ IRS; at L = 5, K = 2, Q = 2 × 25 × 4 = 200, and at L = 10, K = 4, Q = 3,200 = 16 × 200 (inputs doubled, output 24 = 16 times)
Basis Returns to a factor (variable proportions) Returns to scale
Period Short run Long run
Factors that change Only one; the rest fixed All, in the same proportion
Factor proportions Change Stay the same
Measured by Rise or fall of MP Proportionate change in output

10 Costs and the cost function

  • A given output can usually be produced with more than one input combination. In Table 3.1, 50 units can be produced by three: (L = 6, K = 3), (L = 4, K = 4), (L = 3, K = 6)
  • With input prices given, the firm chooses the combination that is least expensive: for every level of output, the least cost input combination
Learn by heartDefinition 14

The cost function describes the least cost of producing each level of output, given the prices of factors of production and technology.

Explicit cost

  • Actual money expenditure on inputs (definition from the CBSE supplement)
  • For instance wages, payment for raw material, rent of a hired machine

Implicit cost (CBSE supplement)

  • Estimated money value of inputs supplied by the owners, including normal profit
  • For example the owner’s estimated salary, estimated interest on own money invested, estimated rent of the owner’s building

Normal profit is the minimum profit the owners must get in the long run to stay in the current business rather than shift to the next best alternative.

11 Short run costs: TFC, TVC and TC

Learn by heartDefinition 15

Total fixed cost (TFC) is the cost a firm incurs to employ the fixed inputs in the short run. Whatever the output, this cost remains fixed (even at zero output).

Learn by heartDefinition 16

Total variable cost (TVC) is the cost a firm incurs to employ the variable inputs. More output needs more variable inputs, so TVC rises with output; at zero output TVC is zero.

Learn by heartDefinition 17

Total cost (TC) is the sum of fixed and variable costs: TC=TVC+TFCTC = TVC + TFC  (3.6)

Table 3.3: Various Concepts of Costs (all costs in Rs)

Output (q) TFC TVC TC AFC AVC SAC SMC
0 20 0 20 – – – –
1 20 10 30 20 10 30 10
2 20 18 38 10 9 19 8
3 20 24 44 6.67 8 14.67 6
4 20 29 49 5 7.25 12.25 5
5 20 33 53 4 6.6 10.6 4
6 20 39 59 3.33 6.5 9.83 6
7 20 47 67 2.86 6.7 9.57 8
8 20 60 80 2.5 7.5 10 13
9 20 75 95 2.22 8.33 10.55 15
10 20 95 115 2 9.5 11.5 20

Values as in the book’s Table 3.3. Worked to two decimals, AVC at q = 7 is 47/7 = 6.71 and SAC at q = 9 is 95/9 = 10.56.

  • TFC = ₹20 at every output; at zero output TC = TFC = ₹20
  • For 1 unit, TVC = ₹10 and TC = ₹30; for 2 units, TVC = ₹18 and TC = ₹38
  • TFC is fixed, so every change in TC comes only from the change in TVC
Figure 3: Total fixed cost (TFC) is a horizontal line at c₁; total variable cost (TVC) rises from the origin; total cost (TC) is the vertical sum of TFC and TVC. At q₁, TVC = c₂ and TC = c₃ (book Fig. 3.3)
Figure 3: Total fixed cost (TFC) is a horizontal line at c₁; total variable cost (TVC) rises from the origin; total cost (TC) is the vertical sum of TFC and TVC. At q₁, TVC = c₂ and TC = c₃ (book Fig. 3.3)
  • TFC curve: independent of output, so a horizontal straight line cutting the cost axis at c1
  • TVC curve: starts at the origin and rises; at q1, TVC = c2
  • TC curve: the vertical sum of TFC and TVC; at q1, TC = c3. It starts at the height of TFC (c1) and runs exactly c1 above TVC, with the same shape

12 Average costs and marginal cost

Learn by heartDefinition 18

Short run average cost (SAC) is total cost per unit of output: SAC=TCqSAC = \dfrac{TC}{q}  (3.7)

Learn by heartDefinition 19

Average variable cost (AVC) is total variable cost per unit of output: AVC=TVCqAVC = \dfrac{TVC}{q}  (3.8)

Learn by heartDefinition 20

Average fixed cost (AFC) is total fixed cost per unit of output: AFC=TFCqAFC = \dfrac{TFC}{q}  (3.9)

Learn by heartDefinition 21

Short run marginal cost (SMC) is the change in total cost per unit of change in output: SMC=change in total costchange in output=ΔTCΔqSMC = \dfrac{\text{change in total cost}}{\text{change in output}} = \dfrac{\Delta TC}{\Delta q}  (3.11)

Relations
SAC=AVC+AFCSAC = AVC + AFC  (3.10)
SMCq=TCq−TCq−1=TVCq−TVCq−1SMC_q = TC_q – TC_{q-1} = TVC_q – TVC_{q-1}

Book example (q = 5): change in TC = 53 − 49 = 4, change in q = 1, SMC = 4/1 = ₹4 (3.12)

  • At zero output SAC, AVC, AFC and SMC are all undefined
  • For the first unit: AFC = ₹20, AVC = ₹10, and their sum SAC = ₹30; for the first unit SMC = AVC = ₹10
  • Fixed cost cannot change in the short run, so marginal cost = the increase in TVC from producing one extra unit (CBSE supplement: TFC is the same in both terms and cancels)
  • Sum of marginal costs = TVC: in Table 3.3, 10 + 8 + 6 + 5 + 4 + 6 + 8 + 13 + 15 + 20 = 95 = TVC at q = 10
  • So AVC = the average of all marginal costs up to that level; and the area under the SMC curve up to an output is the TVC up to that output
Worked example 4: complete a cost table
Given

TFC = ₹60; TVC (q = 1 to 6): 40, 70, 90, 120, 160, 216

To find

TC, AFC, AVC, AC, MC

q TVC TC = TFC + TVC AFC = 60/q AVC = TVC/q AC = TC/q MC = ΔTC
0 0 60 – – – –
1 40 100 60 40 100 40
2 70 130 30 35 65 30
3 90 150 20 30 50 20
4 120 180 15 30 45 30
5 160 220 12 32 44 40
6 216 276 10 36 46 56
  • Check: in every row AFC + AVC = AC (e.g. q = 5: 12 + 32 = 44) (½)
  • At q = 4, MC = AVC = ₹30, where AVC is at its minimum (½)
  • At q = 5, MC (40) < previous AC (45), so AC falls to 44; at q = 6, MC (56) > AC (44), so AC rises to 46 (½)
  • Meaning: AC is lowest at q = 5 and AVC at q = 3-4
Common mistakes
  • To get TFC from a TC table, take the TC at q = 0; that is TFC (and it is the same at every level)
  • AFC × q = TFC, but AVC × q = TVC; mixing them up is wrong
  • Finding MC as TC/q is wrong (that is AC); MC is the difference between two successive TCs
  • “TFC affects MC” is wrong; a change in TFC changes AFC and AC, not MC or AVC

13 Shapes of the short run cost curves

13.1 The AFC curve

  • AFC = TFC/q with TFC constant, so as q increases AFC keeps falling
  • When output is very close to zero, AFC is arbitrarily large; as output moves towards infinity, AFC moves towards zero, but never reaches it
  • The AFC curve is a rectangular hyperbola: multiplying any q by its AFC always gives the same constant (TFC)
  • Fig 3.4: at q1, AFC = OF; TFC=AFC×quantity=OF×Oq1TFC = AFC \times \text{quantity} = OF \times Oq_1 = area of rectangle OFCq1
  • Fig 3.5: AFC from the TFC curve: point A on the TFC curve at q0; if ∠AOq0 = θ, then AFC=TFCquantity=Aq0Oq0=tan⁡θAFC = \dfrac{TFC}{\text{quantity}} = \dfrac{Aq_0}{Oq_0} = \tan\theta
Figure 4: (a) The average fixed cost (AFC) curve is a rectangular hyperbola; the area of rectangle OFCq₁ is TFC (Fig. 3.4). (b) The total fixed cost curve: the slope of ray OA, tanθ = Aq₀/Oq₀, is AFC at q₀ (Fig. 3.5)
Figure 4: (a) The average fixed cost (AFC) curve is a rectangular hyperbola; the area of rectangle OFCq₁ is TFC (Fig. 3.4). (b) The total fixed cost curve: the slope of ray OA, tanθ = Aq₀/Oq₀, is AFC at q₀ (Fig. 3.5)

13.2 Why the SMC curve is U-shaped

At firstLaw of variable proportions: the factor’s MP rises ⇒ each extra unit of output needs less and less of the factor ⇒ with the factor price given, SMC falls
↓
LaterAfter a point MP falls ⇒ each extra unit needs more and more of the factor ⇒ SMC rises
↓
ResultThe SMC curve is U-shaped; at zero output SMC is undefined

13.3 The AVC curve

  • For the first unit SMC = AVC, so both curves start from the same point
  • As output rises SMC falls; AVC, being the average of marginal costs, also falls, but less than SMC
  • Even when SMC starts rising, AVC keeps falling as long as SMC < AVC; once SMC rises above AVC, AVC starts rising. So the AVC curve is U-shaped
  • Fig 3.6: at q0, AVC = OV; TVC=AVC×quantity=OV×Oq0TVC = AVC \times \text{quantity} = OV \times Oq_0 = area of rectangle OVBq0
  • Fig 3.7: AVC from the TVC curve: point E on the TVC curve at q0, OV = TVC; if ∠EOq0 = θ, then AVC=TVCoutput=Eq0Oq0=tan⁡θAVC = \dfrac{TVC}{\text{output}} = \dfrac{Eq_0}{Oq_0} = \tan\theta
Figure 5: (a) The average variable cost (AVC) curve is U-shaped; the area of rectangle OVBq₀ is TVC at q₀ (Fig. 3.6). (b) The total variable cost curve: the slope of ray OE, tanθ = Eq₀/Oq₀, is AVC at q₀ (Fig. 3.7)
Figure 5: (a) The average variable cost (AVC) curve is U-shaped; the area of rectangle OVBq₀ is TVC at q₀ (Fig. 3.6). (b) The total variable cost curve: the slope of ray OE, tanθ = Eq₀/Oq₀, is AVC at q₀ (Fig. 3.7)

13.4 The SAC curve

  • SAC = AVC + AFC. At first both AVC and AFC fall, so SAC falls
  • After a certain output AVC starts rising, but AFC keeps falling. At first the fall in AFC is greater than the rise in AVC, so SAC still falls
  • After a certain level the rise in AVC becomes larger than the fall in AFC; from then on SAC rises. So the SAC curve is U-shaped
  • SAC lies above AVC; the vertical gap between them = AFC (which keeps shrinking, so the two curves come closer but never meet)
  • The minimum of SAC lies to the right of the minimum of AVC
Figure 6: Short run cost curves: short run marginal cost (SMC), average variable cost (AVC) and short run average cost (SAC) are all U-shaped; SMC cuts AVC from below at its minimum P (output q₁) and SAC from below at its minimum S (output q₂) (Fig. 3.8)
Figure 6: Short run cost curves: short run marginal cost (SMC), average variable cost (AVC) and short run average cost (SAC) are all U-shaped; SMC cuts AVC from below at its minimum P (output q₁) and SAC from below at its minimum S (output q₂) (Fig. 3.8)
Learn by heartDefinition 22

The SMC curve cuts the AVC curve from below at the minimum point of AVC (P) and cuts the SAC curve from below at the minimum point of SAC (S). Reason: as long as an average is falling, the marginal must be below it; when the average is rising, the marginal must be above it.

In Fig 3.8, P is at output q1 and S at output q2; to the left of q1 and q2 the marginal is below the average, to the right it is above.

13.5 The arithmetic relation between MC and AC (CBSE supplement)

Output TC (₹) MC (₹) AC (₹) Relation
1 60 60 60 First unit: MC = AC
2 110 50 55 MC < AC ⇒ AC falls
3 162 52 54 MC < AC ⇒ AC falls (even though MC rose)
4 216 54 54 MC = AC ⇒ AC constant
5 275 59 55 MC > AC ⇒ AC rises
  • This relation holds for the average and marginal values of any variable (revenue, product and so on)
  • A rising MC does not mean a rising AC: at q = 3, MC rose from 50 to 52 but AC fell from 55 to 54
Common mistakes
  • “SMC can cut AVC at any point” is wrong; always at the minimum of AVC, from below
  • Drawing AFC as a U is wrong; it is a continuously falling rectangular hyperbola that never touches the X axis
  • Letting SAC and AVC meet is wrong; the gap between them, AFC, is never zero

14 Long run costs (Not in CBSE 2026-27 syllabus)

  • In the long run all inputs are variable, so there are no fixed costs; total cost and total variable cost coincide
  • Long run average cost: LRAC=TCqLRAC = \dfrac{TC}{q}  (3.13)
  • Long run marginal cost: raising output from q1 − 1 to q1, LRMC=(TC at q1 units)−(TC at q1−1 units)LRMC = (TC \text{ at } q_1 \text{ units}) – (TC \text{ at } q_1 – 1 \text{ units})  (3.14)
  • As in the short run, the sum of all marginal costs up to an output gives total cost at that output
Returns to scale Inputs needed to raise output by a proportion Cost LRAC
IRS Less than that proportion (double output with less than double inputs) rises by a smaller proportion falls
CRS The same proportion the same proportion constant
DRS More than that proportion a larger proportion rises
  • It is argued that a typical firm shows IRS at the initial level of production, then CRS, then DRS; so the LRAC curve is U-shaped
  • The downward part corresponds to IRS and the rising part to DRS; at the minimum of LRAC, CRS is observed
  • For the first unit LRMC = LRAC; while LRAC falls LRMC < LRAC, and while LRAC rises LRMC > LRAC. So LRMC is also U-shaped and cuts LRAC from below at its minimum point M (Fig 3.9)
  • LRAC is minimum at q1: to the left of q1 LRMC < LRAC, to the right LRMC > LRAC
Figure 7: Long run cost curves: long run average cost (LRAC) and long run marginal cost (LRMC) are U-shaped; LRMC cuts LRAC from below at its minimum M (output q₁). The falling part goes with increasing, M with constant and the rising part with decreasing returns to scale (Fig. 3.9)
Figure 7: Long run cost curves: long run average cost (LRAC) and long run marginal cost (LRMC) are U-shaped; LRMC cuts LRAC from below at its minimum M (output q₁). The falling part goes with increasing, M with constant and the rising part with decreasing returns to scale (Fig. 3.9)

15 Key formulas and difference tables

Key formulas
APL=TPLLAP_L = \dfrac{TP_L}{L}    MPL=ΔTPLΔL=TPL−TPL−1MP_L = \dfrac{\Delta TP_L}{\Delta L} = TP_L – TP_{L-1}    TP=∑MPTP = \sum MP
TC=TFC+TVCTC = TFC + TVC    AFC=TFCqAFC = \dfrac{TFC}{q}    AVC=TVCqAVC = \dfrac{TVC}{q}    SAC=TCq=AFC+AVCSAC = \dfrac{TC}{q} = AFC + AVC
SMC=ΔTCΔq=TCq−TCq−1=TVCq−TVCq−1SMC = \dfrac{\Delta TC}{\Delta q} = TC_q – TC_{q-1} = TVC_q – TVC_{q-1}    TVC=∑SMCTVC = \sum SMC
TFC=AFC×q=TC at q=0TFC = AFC \times q = TC \text{ at } q = 0    TVC=AVC×qTVC = AVC \times q    AFC=SAC−AVCAFC = SAC – AVC
Cobb-Douglas q=x1αx2βq = x_1^{\alpha} x_2^{\beta}: α+β=1\alpha + \beta = 1 CRS, >1\gt 1 IRS, <1\lt 1 DRS
Basis Fixed cost Variable cost
Meaning Cost of fixed inputs Cost of variable inputs
Relation to output Independent of output Rises with output
At zero output Positive (TC = TFC) Zero
Period Short run only Short run and long run
Curves Horizontal line (TFC); rectangular hyperbola (AFC) Rises from origin (TVC); U (AVC)
Relation Product curves Cost curves
Shape AP, MP inverse U AVC, SAC, SMC U
Crossing MP cuts AP at its maximum from above SMC cuts AVC and SAC at their minimum from below
Sum Sum of MPs = TP Sum of SMCs = TVC
Reason Law of variable proportions The same law in reverse (MP rises, so MC falls)

16 All definitions together

Learn by heart
ProductionThe process of transforming inputs into output
Production functionRelation giving the maximum output for various quantities of inputs; q = f(L, K)
IsoquantSet of input combinations that yield the same maximum output
Short runAt least one factor fixed
Fixed / variable factorFactor that cannot / can be varied in the short run
Long runAll factors variable
Total productRelation between the variable input and output, other inputs constant
Average productOutput per unit of the variable input, TP/L
Marginal productChange in output per unit change in the input, ΔTP/ΔL
Law of variable proportionsMP first rises, then falls after a certain level
Factor proportionsRatio in which two inputs are combined
Returns to scaleChange in output when all inputs rise in the same proportion: CRS, IRS, DRS
Cobb-Douglas production functionq = x₁^α x₂^β
Cost functionLeast cost of producing each level of output
TFC / TVC / TCCost of fixed inputs / cost of variable inputs / their sum
AFC / AVC / SACTFC/q / TVC/q / TC/q
SMCChange in TC per unit change in output
Rectangular hyperbolaThe AFC curve; AFC × q = TFC at every point
LRAC / LRMCTC/q / change in TC per unit, in the long run
Explicit / implicit costActual money expenditure / estimated value of the owner’s own inputs, including normal profit
Quick recap: read the night before the exam
  • The production function gives maximum output; for a given technology, efficient use only
  • Short run: at least one factor fixed; long run: all variable; not defined in days or years
  • AP = TP/L, MP = ΔTP/ΔL; TP = sum of MPs; in Table 3.2, TP 57 = 10 + 14 + 16 + 10 + 6 + 1
  • MP first rises then falls: law of variable proportions (cause: changing factor proportions, crowding)
  • Three phases: MP rising / MP falling but positive / MP negative; TP is maximum where MP = 0
  • MP and AP are inverse U; MP cuts AP from above at AP’s maximum
  • TC = TFC + TVC; SAC = AFC + AVC; SMC = ΔTC = ΔTVC; TVC = sum of SMCs
  • AFC is a rectangular hyperbola (AFC × q = TFC); TFC is a horizontal line
  • SMC, AVC, SAC are U; SMC cuts both at their minima from below; SAC’s minimum is to the right of AVC’s
  • CRS/IRS/DRS: inputs doubled ⇒ output doubled / more / less; Cobb-Douglas: compare α + β with 1
  • No fixed cost in the long run; LRAC U (IRS, CRS, DRS); LRMC cuts LRAC at M from below
Check yourself before the exam
  • Can I build AP and MP from TP, TP from AP, and TP from MP?
  • Can I fill TFC, TVC, AFC, AVC, SAC and SMC from a TC table?
  • Can I draw TP, AP and MP with all three phases?
  • Can I draw SMC, AVC and SAC with points P and S and write why SMC cuts them there?
  • Can I explain AFC with the rectangular hyperbola and the rectangle OFCq1?
  • Can I tell the law of variable proportions apart from returns to scale?
Read this chapter in:English Mediumहिंदी माध्यम