Class 11 Geography Chapter 12 Important Questions with Answers in English

Exam-useful questions from this chapter, grouped by marks, each with a full model answer. Try writing the answer yourself first, then check it against this one.

1 1-Mark Questions

Question 1 (1 mark)

Q. What is a landform?

Answer: A landform is a small to medium-sized tract of the earth’s surface with its own physical shape, size and materials, formed as the result of some geomorphic process and agent(s).

Question 2 (1 mark)

Q. State the main difference between a gorge and a canyon in one line.

Answer: A gorge is almost equal in width at the top and the bottom (formed in hard rock), while a canyon is wider at the top than at the bottom, with steep step-like side slopes (formed in horizontally bedded sedimentary rock).

Question 3 (1 mark)

Q. What is a peneplain?

Answer: The almost-flat plain that finally results from the continued erosion of a landmass by running water is called a peneplain.

Question 4 (1 mark)

Q. What is a doline?

Answer: A collapsed sinkhole, where the roof of an underlying cave or void has caved in, is called a doline.

Question 5 (1 mark)

Q. What is a tarn (cirque) lake?

Answer: The lake of water that is often seen within a cirque after the glacier that carved it has disappeared is called a tarn or cirque lake.

Question 6 (1 mark)

Q. What is a spit?

Answer: A barrier bar that gets keyed up to the headland of a bay, with one end attached to the coast, is called a spit.

Question 7 (1 mark)

Q. What is an inselberg?

Answer: The isolated remnant of a mountain that is left standing amid a pediplain, formed through the parallel retreat of slopes, is called an inselberg.

Question 8 (1 mark)

Q. State the one-line difference between the stoss end and the tail of a drumlin.

Answer: The stoss end faces the glacier and is blunt and steep, while the tail, at the opposite end, is thin and tapering.

Question 9 (1 mark)

Q. What is a fjord?

Answer: A very deep glacial trough along a high-latitude coastline, later filled with sea water to form a shoreline, is called a fjord.

2 2-Mark Questions

Question 1 (2 marks)

Q. How do potholes and plunge pools form?

Answer: Over the rocky beds of hill streams, the abrasion of rotating rock fragments carried by turbulent flowing water carves more or less circular depressions called potholes; at the base of a waterfall, the sheer impact of water and rotating boulders forms much larger and deeper holes called plunge pools.

Question 2 (2 marks)

Q. What are river terraces, and what is a paired terrace?

Answer: River terraces are surfaces marking an old valley floor or floodplain level, formed by vertical erosion of the stream into its own earlier floodplain. When such terraces occur at the same elevation on both sides of the valley, they are called paired terraces.

Question 3 (2 marks)

Q. What is the difference between a sinkhole and a doline?

Answer: A sinkhole is a small to medium-sized, more or less circular opening in limestone, funnel-shaped towards the bottom, formed through solution. When the roof of an underlying cave collapses and the sinkhole caves in, it is called a doline.

Question 4 (2 marks)

Q. What is an uvala, and how does it form?

Answer: A long, narrow to wide trench formed when several sinkholes and dolines join together, because of slumping of material along their margins or roof collapse of caves, is called a valley sink or uvala.

Question 5 (2 marks)

Q. Distinguish between a terminal moraine and a ground moraine.

Answer: A terminal moraine is a long ridge of debris deposited at the end (toe) of a glacier, while a ground moraine is an irregular sheet of till of varying thickness left over the valley floor when a glacier retreats.

Question 6 (2 marks)

Q. What is the difference between a barchan and a seif?

Answer: A barchan is a crescent-shaped dune with both wings pointing downwind; a seif is similar but has only one wing, formed when the wind direction shifts, and its single wing can grow very long and high.

Question 7 (2 marks)

Q. What is the difference between longitudinal and transverse dunes?

Answer: Longitudinal dunes form as long, low ridges when the sand supply is poor and the wind direction is constant; transverse dunes are aligned at right angles to the wind direction, forming when the source of sand is an elongated feature across the wind’s path.

Question 8 (2 marks)

Q. In what order do landforms defend the coast against storm and tsunami waves?

Answer: From the sea towards the land, the order is: offshore bars, then barriers, then beaches, then beach dunes and mangroves (where present), each absorbing part of the destructive force before it reaches the land.

3 4-Mark Questions

Question 1 (4 marks)

Q. Describe the erosional landforms of running water.

Answer: (i) Valleys: begin as small rills that deepen and widen into gullies and finally valleys; depending on shape, these include V-shaped valleys, gorges (steep, straight sides, equal width, hard rock) and canyons (step-like slopes, wider at the top, sedimentary rock). (ii) Potholes and plunge pools: circular depressions cut by turbulent, sediment-laden water, larger ones forming at the base of waterfalls. (iii) Incised or entrenched meanders: very deep and wide meanders cut in hard rocks; meanders formed over broad upland surfaces may later entrench themselves into the uplands. (iv) River terraces: stepped remnants of a former floodplain, sometimes paired on both banks.

Question 2 (4 marks)

Q. Describe the depositional landforms of running water.

Answer: (i) Alluvial fans: broad, cone-shaped deposits where a stream breaks from a steep mountain slope onto a gentler foot-slope plain, e.g. on the way to Amarnath, Jammu and Kashmir. (ii) Deltas: fan-like deposits where a river’s load is dumped into the sea, e.g. the Krishna river delta, Andhra Pradesh. (iii) Floodplains, natural levees (low, linear, parallel ridges of coarse deposits along the banks of large rivers) and point (or meander) bars (sediments deposited in a linear fashion by flowing water along the bank, on the concave side of meanders of large rivers, as the book puts it). (iv) A meander itself is only a channel pattern, not a landform; when a deep meander loop of a large river on its flood or delta plain gets cut off by erosion at the inflection points, it is left as an ox-bow lake, as seen along the Burhi Gandak river near Muzaffarpur, Bihar.

Question 3 (4 marks)

Q. Describe the erosional and depositional landforms of karst topography.

Answer: Erosional: sinkholes (formed by solution in limestone), dolines (collapsed sinkholes), uvalas (formed when several sinkholes/dolines merge), lapies (an irregular surface of sharp ridges and grooves), limestone pavements, and caves and tunnels (caves open at both ends). Depositional: stalactites (hanging from the cave roof), stalagmites (rising from the floor) and pillars (formed where the two meet and fuse).

Question 4 (4 marks)

Q. Describe the erosional landforms produced by glaciers.

Answer: (i) Cirques: deep, steep-walled basins at the head of a glacial valley, often holding a tarn lake after the glacier melts. (ii) Horns and arêtes: where three or more cirques cut headward and meet, sharp peaks called horns form (e.g. the Matterhorn and Everest), and the narrowing divides between cirque walls turn into serrated ridges called arêtes. (iii) Glacial valleys/troughs: broad, U-shaped valleys. (iv) Hanging valleys: tributary glacial valleys left at a higher elevation than the main valley. (v) Fjords: very deep glacial troughs along a coast, later filled with sea water.

Question 5 (4 marks)

Q. Describe the depositional landforms produced by glaciers.

Answer: (i) Moraines: terminal (at the glacier’s toe), lateral (along the valley sides), medial (where two lateral moraines join in the middle of the valley) and ground moraines (an irregular sheet over the valley floor). (ii) Eskers: sinuous ridges left by streams that once flowed beneath the glacier. (iii) Outwash plains: broad, flat plains of glacio-fluvial deposits at the foot of glaciated mountains. (iv) Drumlins: smooth, oval ridges of till, with a blunt, steep stoss end facing the glacier and a thin tail pointing away, which indicate the direction of ice movement.

Question 6 (4 marks)

Q. Describe the erosional and depositional landforms produced by waves and currents.

Answer: Erosional: sea cliffs (formed by wave attack on rock), wave-cut terraces at their foot, sea caves, and sea stacks left as isolated remnants of a retreating cliff. Depositional: beaches, sand dunes, bars, barrier bars, spits (e.g. seen at the mouth of the Godavari river delta) and lagoons (formed when bars/spits close off a bay). India’s high, rocky west coast is dominated by erosional forms, while the low, sedimentary east coast is dominated by depositional forms.

4 6-Mark Questions

Question 1 (6 marks)

Q. Describe in detail the erosional and depositional landforms produced by wind.

Answer: Wind acts through three processes: deflation (lifting and removing fine dust and particles), abrasion (using sand and silt as tools to wear down rock surfaces) and impact (the sheer force of sand striking a rock surface, like sand-blasting). Erosional landforms: pediments (gently sloping rocky floors at the foot of mountains, formed by lateral stream erosion combined with sheet flooding), which extend backward through the parallel retreat of slopes into pediplains, leaving behind isolated mountain remnants called inselbergs; playas (shallow, temporary salt lakes in desert basins, sometimes covered with alkali flats); deflation hollows and caves; and mushroom, table and pedestal rocks, shaped by differential wind wear. Depositional landforms: sand dunes, including barchans (crescent-shaped, wings pointing downwind), parabolic dunes (reversed barchans, forming where vegetation partly covers the sand), seif (like a barchan but with only one wing), and longitudinal and transverse dunes (aligned parallel to or at right angles to the wind respectively). Many desert features actually owe their formation to mass wasting and running water as sheet floods rather than to wind alone; wind is not the only agent responsible for the erosional features of deserts.

Question 2 (6 marks)

Q. Compare the three stages of the fluvial erosion cycle: youth, mature and old age.

Answer: In youth, streams are few with poor integration, flowing over the original slope in shallow V-shaped valleys with narrow or absent floodplains; divides are broad and flat with marshes and swamps, and waterfalls/rapids may exist where hard rock is exposed. In maturity, streams are plentiful and well-integrated; valleys are still V-shaped but deep, with broad floodplains within which the trunk stream may meander; the swampy interstream areas of youth disappear, divides turn sharp, and waterfalls and rapids disappear. In old age, tributaries are few with gentle gradients; streams meander freely over vast floodplains, showing natural levees and ox-bow lakes; divides are broad and flat with lakes and swamps, and most of the landscape lies at or only slightly above sea level.

5 Case Studies

Case Study
A river flowing through a floodplain moves very slowly. Over time, the neck of one of its loops keeps narrowing, until the two banks nearly meet. During a single flood, the river breaks through this narrow neck and cuts a straight new course, leaving the looped section cut off from the main channel.

(A) 1 mark What is this looped bend of the river’s course called, before it gets cut off?
Answer: A meander.

(B) 2 marks What landform does the cut-off loop become, and why does its curved shape remain visible for a long time?
Answer: It becomes an ox-bow lake. Since the cut-off loop is separated from the main current, fresh water flow and erosion within it are very slow, so its curved shape survives for a long time.

(C) 3 marks According to the chapter, why is a meander not considered a landform in itself, and what factors cause it to form?
Answer: The chapter states that a meander is not a landform, only a channel pattern. It forms because of the tendency of water flowing over very gentle gradients to work laterally on the banks, the unconsolidated nature of alluvial banks (which offers many irregularities for the water to exploit), and the coriolis force acting on the flowing water, which deflects it sideways: so it is a channel’s behaviour rather than a permanent landform.

Case Study
At the head of a glacial valley, three deep, bowl-shaped hollows kept eroding headward until their walls met, forming a single sharp, pointed peak. After the glacier melted, water collected in each of these hollows.

(A) 1 mark What are these bowl-shaped hollows called?
Answer: Cirques.

(B) 2 marks What are the lakes formed in them called, and what is the sharp peak formed by three or more such hollows meeting called?
Answer: The lakes are called tarn (or cirque) lakes; the sharp peak formed where three or more cirques meet is called a horn, as with the Matterhorn (Alps) and Everest (Himalayas).

(C) 4 marks If two or more cirques meet in a stepped sequence rather than only at the top, what other features can form in the valley, based on the chapter?
Answer: Cirques meeting in a stepped sequence can leave a chain of several tarn lakes down the valley. The main valley can also be deepened into a U-shaped glacial trough, while smaller tributary glacial valleys, which do not cut as deep as the main valley, are left as hanging valleys, sometimes draining into the main valley as waterfalls from a height.