Every question from the Exercises (including the Activity constructions) of NCERT’s Practical Work in Geography, Chapter 4 “Map Projections” (Chapter 24 on this site), in exactly the same order and wording as the book (English edition), with a full answer for each. Try answering first, then check.
1 Choose the right answer from the four alternatives given below
Q. A map projection least suitable for the world map:
(a) Mercator (b) Simple Cylindrical (c) Conical (d) All the above
Answer: (c) Conical. The chapter lists the first limitation of the conical projection as: it is not suitable for a world map, because of extreme distortion in the hemisphere opposite the one in which the standard parallel is selected. Mercator’s projection, by contrast, is described as more suitable for a world map and widely used for atlas maps.
Q. A map projection that is neither the equal area nor the correct shape and even the directions are also incorrect:
(a) Simple Conical (b) Polar zenithal (c) Mercator (d) Cylindrical
Answer: (a) Simple Conical. The chapter says the conical projection with one standard parallel is neither equal area nor orthomorphic, and its directions are not correct either. The other options each keep at least one property: a polar zenithal projection shows correct directions from its centre, Mercator’s keeps correct shape and direction, and the cylindrical equal area projection keeps area correct.
Q. A map projection having correct direction and correct shape but area greatly exaggerated polewards is:
(a) Cylindrical Equal Area (b) Mercator (c) Conical (d) All the above
Answer: (b) Mercator. Mercator’s Projection is both orthomorphic (true-shape) and azimuthal (true-direction), but the scale of area is greatly exaggerated at high latitudes: for example, Greenland appears as large as the USA on this projection, though it is really about one-tenth of its size.
Q. When the source of light is placed at the centre of the globe, the resultant projection is called:
(a) Orthographic (b) Stereographic (c) Gnomonic (d) All the above
Answer: (c) Gnomonic. Three projections result from the three possible positions of the source of light: Gnomonic (light at the centre of the globe), Stereographic (light at the periphery, opposite the point of tangency), and Orthographic (light at infinity); placing the light at the centre gives the Gnomonic projection.
2 Answer the following questions in about 30 words
Q. Describe the elements of map projection.
Answer: The main elements of map projection are: Reduced Earth (a spheroid model built on a reduced scale), Parallels of latitude, Meridians of longitude, and the four Global properties (distance, shape, area, direction), no single projection of which can preserve all four together.
Q. What do you mean by global property?
Answer: Global property refers to the four characteristics a map projection tries to preserve: distance, shape, area and direction; no single projection can keep all four correct at once, so every projection prioritises one or two of them and accepts distortion in the rest.
Q. Not a single map projection represents the globe truly. Why?
Answer: The globe is a non-developable surface, that is, it cannot be flattened without shrinking, breaking or creasing it; so while transferring the graticule onto a flat surface, distortion in shape, size, distance or direction is always inevitable.
Q. How is the area kept equal in cylindrical equal area projection?
Answer: The graticule is projected with parallel rays onto a cylinder touching the globe at the equator. Every parallel is drawn as long as the equator, so the east-west scale is stretched more and more towards the poles; to balance this, the parallels are placed closer and closer together towards the poles (each is drawn at the height where it meets the circle of the reduced earth, so the north-south scale is shortened). The stretching in one direction and the shortening in the other cancel out, so the area of every part stays correct, while the shape gets distorted at higher latitudes.
3 Differentiate between
Q. Developable and non-developable surfaces
Answer: A developable surface (such as the cylinder, cone or plane) can be flattened without shrinking, breaking or creasing it, so the graticule can be projected onto it and then cut open; a non-developable surface (such as a sphere or the globe) cannot be flattened this way, which is exactly why map projection is needed at all.
Q. Homolographic and orthographic projections
Answer: A homolographic (equal area) projection keeps every graticule cell on the map equal in area to the corresponding cell on the globe, at the cost of shape; an orthographic projection, by contrast, is a perspective projection in which the source of light is placed at infinity, opposite the point of tangency, giving a different construction and effect altogether.
Q. Normal and oblique projections
Answer: In a normal (equatorial) projection, the developable surface touches the globe at the equator; in an oblique projection, it is tangential to a point between the pole and the equator. The difference between the two is simply the position of the point of tangency.
Q. Parallels of latitude and meridians of longitude
Answer: Parallels of latitude are full circles round the globe, parallel to the equator, becoming smaller towards the poles and marked 0° to 90° North and South; meridians of longitude are semi-circles running north-south from one pole to the other, all equal in length, with the Greenwich meridian marked as the arbitrary 0° reference.
4 Answer the following questions in not more than 125 words
Q. Discuss the criteria used for classifying map projection and state the major characteristics of each type of projection.
Answer: Map projections are classified on four completely independent bases. (1) By drawing technique: perspective projections use a source of light to project the graticule’s shadow onto a developable surface; non-perspective projections are developed geometrically, without a light source; mathematical (conventional) projections are derived purely by formulae. (2) By developable surface: cutting open a cylinder gives a cylindrical projection, a cone gives a conical projection, and a plane touching the globe directly gives a zenithal (azimuthal) projection, further divided into normal, oblique and polar. (3) By global property preserved: equal area preserves area, orthomorphic preserves shape, azimuthal preserves direction, and equidistant keeps scale true only along some selected lines. (4) By source of light: Gnomonic (light at the centre), Stereographic (light at the periphery, opposite), Orthographic (light at infinity). Since these four bases are independent, a single projection, such as Mercator’s, can be cylindrical, orthomorphic-azimuthal and mathematical, all at once.
Q. Which map projection is very useful for navigational purposes? Explain the properties and limitations of this projection.
Answer: Mercator’s Projection is considered most useful for navigation, because the straight line drawn on it (the rhumb line or Loxodrome) joins any two points at a constant bearing, letting a ship or aircraft follow its route without repeatedly changing direction. Its properties are equally important: parallels and meridians are straight lines crossing at right angles; all parallels are equal in length to the equator; it is both orthomorphic (true-shape) and azimuthal (true-direction). Its limitations matter just as much: the scale is greatly exaggerated at high latitudes, as NCERT’s own example shows, Greenland appears the same size as the USA, though it is really only about one-tenth of its size, and the poles themselves cannot be shown, because the 90° parallel and the meridians touching it become infinite. Despite these limitations, Mercator’s Projection remains widely used for world maps and atlases, and for showing drainage patterns, ocean currents, temperature, winds and world rainfall distribution.
Q. Discuss the main properties of conical projection with one standard parallel and describe its major limitations.
Answer: A conical projection with one standard parallel is drawn by wrapping a cone around the globe so that it touches along one particular parallel of latitude, called the standard parallel. Its properties are: parallels are arcs of concentric circles, equally spaced; meridians are straight lines converging at the pole and cutting the parallels at right angles; the scale along meridians is true; the pole itself is shown as an arc, not a point; but the scale is true along the standard parallel, becoming increasingly exaggerated away from it. It is neither equal area nor orthomorphic. Its main limitations are: it is not suitable for a world map, because distortion is extreme in the hemisphere opposite the standard parallel; and even within one hemisphere it is not suitable for very large areas, because distortion is greater near the pole and near the equator. This confines its use to limited latitudinal but large longitudinal mid-latitude belts, such as the Canadian Pacific Railway, the Trans-Siberian Railway, the USA-Canada international boundary, and the Narmada Valley.
5 Activity (the book’s own construction exercises)
Q. Construct graticule for an area stretching between 30° N to 70° N and 40° E to 30° W on a simple conical projection with one standard parallel with a scale of 1:200,000,000 and interval at an 10° apart.
Calculation: Radius of the reduced earth R = 640,000,000 ÷ 200,000,000 = 3.2 cm. Parallels: 30°, 40°, 50°, 60°, 70° N, so the standard parallel (the middle one) is 50° N. Meridians: 30° W, 20° W, 10° W, 0°, 10° E, 20° E, 30° E, 40° E, so the central meridian lies midway, at 5° E. Arc distance for a 10° interval (CE) = 2 × 22/7 × 3.2 × 10/360 ≈ 0.56 cm. Radius of the standard parallel on the map (BP, the side of the cone) = R × cot 50° = 3.2 × 0.839 ≈ 2.69 cm. Spacing of meridians along the standard parallel (XY) = 0.56 × cos 50° ≈ 0.36 cm.
Construction: Follow the chapter’s steps: draw a quadrant of 3.2 cm radius and mark 10° angles; draw the tangent from the 50° point to meet the axis at P, giving BP; on a vertical line (the central meridian, 5° E) mark BP from the pole point and draw the 50° N arc with this radius; draw the other parallels as concentric arcs 0.56 cm apart along the central meridian; mark 0.36 cm steps along the standard parallel on both sides of the central meridian and join them to the pole with straight lines to get the meridians from 30° W to 40° E.
Other boards: the Cylindrical Equal Area projection is not in the CBSE 2026-27 syllabus.
Q. Prepare graticule for a Cylindrical Equal Area Projection for the world when R.F. is 1:150,000,000 and the interval is 15° apart.
Calculation: R = 640,000,000 ÷ 150,000,000 ≈ 4.27 cm. Length of the equator = 2 × 22/7 × 4.27 ≈ 26.84 cm. Interval along the equator = 26.84 × 15/360 ≈ 1.12 cm (24 divisions).
Construction: Draw a circle of 4.27 cm radius and mark angles of 15°, 30°, 45°, 60°, 75° and 90° in both hemispheres; draw the equator as a line of 26.84 cm divided into 24 parts of 1.12 cm; draw a perpendicular to the equator where 0° meets the circle, and extend each parallel from the point where its angle meets the circle, equal in length to the equator. The parallels come out at about 1.10, 2.13, 3.02, 3.70, 4.12 and 4.27 cm from the equator (R × sine of the latitude), closer together towards the poles.
Q. Draw a Mercator Projection for the world map when the R.F. is 1:400,000,000 and the interval between the latitude and longitude is 20°.
Calculation: Following the chapter’s example, R = 250,000,000 ÷ 400,000,000 = 0.625 inch. Length of the equator = 2 × 22/7 × 0.625 ≈ 3.93 inches. Interval along the equator = 3.93 × 20/360 ≈ 0.22 inch (18 divisions). Distance of each parallel from the equator = Mercator table value × R: 20°: 0.356 × 0.625 ≈ 0.22 inch; 40°: 0.763 × 0.625 ≈ 0.48 inch; 60°: 1.317 × 0.625 ≈ 0.82 inch; 80°: 2.436 × 0.625 ≈ 1.52 inches (the 60° value 1.317 is the same one the chapter’s table uses).
Construction: Draw the equator as a 3.93-inch line and divide it into 18 parts; draw the meridians as parallel straight lines through these points; mark the parallels at the distances above on both sides of the equator and draw them as straight lines equal to the equator. The poles cannot be shown.
All four parts of Question 1 are asked often, especially (iii), the Mercator’s Greenland-versus-USA size limit, and (iv), the three positions of the source of light. For (i) and (ii), remember that both answers are the conical projection. In Question 4’s long answers, the most useful things to have ready are the four independent classification bases as a list, and a comparison table of all three named projections.
1. Least suitable for a world map (Q1-i): Conical. 2. Neither equal area, correct shape, nor correct direction (Q1-ii): Simple Conical. 3. Orthomorphic and azimuthal, but area exaggerated poleward (Q1-iii): Mercator. 4. Light at the centre of the globe (Q1-iv): Gnomonic. 5. Most useful projection for navigation (Q4-ii): Mercator’s, because the rhumb line gives a constant bearing. Learn these well; they are asked often as objective questions.