Class 11 Physical Education Chapter 6 Test, Measurement and Evaluation CBSE Textbook Solutions

Solutions to every exercise in Unit 6: Test, Measurement and Evaluation of CBSE’s own textbook Physical Education Class XI (2nd edition, 2023). The book has no single exercise block at the end of the unit; it prints a Discussion box, a short set of questions after each section, an extension activity, a complete-the-diagram task, a case study and an art integration task. Every one of them is answered below, in the book’s order. Question wording is as printed in the book.

1 Discussion

Discussion Q1

Q. Working in groups, complete chart given below listing the importance of testing and measurement in sports. (Centre: Importance of Testing and Measurement of Athletes; given entry: Selection of an athlete for a particular game.)

Answer: Around the centre “Importance of Testing and Measurement of Athletes”, the chart can be completed with:

  • Selection of an athlete for a particular game (given)
  • Motivating athletes to continue their activity
  • Self appraisal of the athlete’s own performance
  • Setting new goals for performance enhancement
  • Diagnosis of weaknesses and errors
  • Grouping (placement) of athletes by ability or skill
  • Prediction of future performance
  • Checking and re-designing the training programme
Discussion Q2

Q. What are the tests that could be administered to the athletes?

Answer: Athletes can be given: (i) psychomotor tests (health related fitness, physical fitness, motor fitness and sports skill tests); (ii) anthropometric tests such as height, weight, BMI, waist-hip ratio, body diameters and circumferences; (iii) physical tests such as skinfolds, blood tests and X-rays; (iv) affective domain tests such as personality, social behaviour and stress tests; and (v) cognitive domain tests of attention, concentration and intelligence.

2 Exercises after 6.1: Test, Measurement and Evaluation

I. Tick the correct option: Q1

Q. Mohan’s height is 3ft 11in. 3ft 11 in is an example of
a. test
b. measurement
c. evaluation
d. assessment

Answer: b. measurement. It is a number assigned to what was assessed (his height).

I. Tick the correct option: Q2

Q. Test is a __________
a. Tool
b. Technique
c. Adjustment
d. Assessment

Answer: a. Tool. A test is an instrument or tool used to make a particular measurement.

II. Answer briefly: Q1

Q. What is a test?

Answer: A test is an instrument or tool used to make a particular measurement. The tool may be written, oral, a mechanical device (such as a treadmill), physiological, psychological, or another variation. Example: sit-ups done for 1 minute.

II. Answer briefly: Q2

Q. What is measurement?

Answer: Measurement is the act of assessing; usually it results in assigning a number to the character of whatever is assessed. It is the quantitative form of assessment, i.e. the score obtained through a test. Example: 30 sit-ups.

II. Answer briefly: Q3

Q. What is Evaluation?

Answer: Evaluation is a statement of quality, goodness, merit, value or worthiness about what has been assessed; it implies decision making. It is “the process of delineating, obtaining, and providing useful information for judging decision alternatives.” Example: reporting 30 sit-ups as “Good”.

III. Answer in 150-200 words: Q1

Q. Describe the relationship between test, measurement & evaluation.

Answer: The three terms are sometimes used interchangeably, but they are three linked steps.

Test is the narrowest term. It means the tools, instruments or set of questions used to measure a dimension, quality or condition of a person, object or event; for example, a stadiometer, a sit-up test or a written test.

Measurement is the quantitative form of assessment: the score obtained through the test. Measurement is requisite for evaluation, because evaluation needs numbers or scores to work on.

Evaluation is the widest term. It is the process of delineating, obtaining and providing useful information for judging decision alternatives: a professional judgement about the value or worth of the score.

So the test produces the measurement, and the measurement is judged to give the evaluation: test → measurement → evaluation. For example, a PE teacher gives sit-ups for 1 minute (test), records 30 sit-ups (measurement) and reports the score as Good (evaluation).

Measurement is still not the same as evaluation. Two athletes may obtain the same score, yet they may be evaluated differently because different criteria are available, in terms of norms and criterion measures.

3 Exercises after 6.2: Importance in Sports

I. Tick the correct options: Q1

Q. The term ‘placement’ refers to
i. giving all students the same training programme
ii. placing students into categories based on their skills
iii. determining the strengths and weaknesses of individuals
iv. predicting a student’s future success in a particular sport

Answer: ii. placing students into categories based on their skills (grouping of athletes as per ability or skill).

I. Tick the correct options: Q2

Q. Test and measurement scores are NOT helpful in
i. determining the strengths, weaknesses and limitations of a student
ii. discouraging the student from participating in a particular activity
iii. helping a student pick up the sports activity of his/her choice
iv. predicting the student’s future level of achievement

Answer: ii. discouraging the student from participating in a particular activity. Testing is meant to motivate, diagnose, guide and predict, not to discourage.

II. Answer briefly: Q1

Q. What is the role of tests and measurement in Diagnosis?

Answer: Test results help the PE teacher or coach diagnose (find) the problems and errors in the teaching-learning process and the reasons for an athlete’s weak performance. Once the weak area is known, the training or teaching method can be corrected to improve the athlete’s performance and satisfaction.

II. Answer briefly: Q2

Q. What is role of tests and measurement in Placement?

Answer: Placement means grouping or dividing athletes according to their ability or skill. Test scores show each student’s level, so students of similar ability can be placed in the same group and given training that suits that group.

III. Answer in 150-200 words: Q1

Q. Distinguish between Test, Measurement and Evaluation. Highlight their importance in Sports.

Answer: Test is the tool or instrument (for example sit-ups for 1 minute). Measurement is the act of assessing that gives a number (30 sit-ups). Evaluation is the judgement of quality or worth of that number, which leads to a decision (Good). Test is the narrowest term, measurement is quantitative and needed for evaluation, and evaluation is the widest, judging the score against norms or criteria.

Importance in sports:

  • Athlete’s perspective: motivation for continuity, self appraisal of performance, goal setting for performance enhancement.
  • Coach’s perspective: diagnosis of problems and errors in teaching-learning, grouping of athletes by ability or skill, prediction of performance, self-assessment of teaching effectiveness; it gives authentic feedback on pedagogy and student satisfaction.
  • Training programme perspective: benchmarking with objectives and other approaches, establishing norms and standards, re-designing the programme from previous results, and quality check and control. Since training programmes are dynamic, every change should be based on scientific testing.

4 Exercises after 6.3: Classification of Tests

I. Tick the correct options: Q1

Q. BMI is an example of which of the following:
i. Anthropometric Tests
ii. Physical Fitness Tests
iii. Psychomotor Tests
iv. Written Tests

Answer: i. Anthropometric Tests. BMI (height-weight ratio) is listed under body measurements.

I. Tick the correct options: Q2

Q. Which type of test may be used to test social behaviour?
i. Anthropometric Tests
ii. Physical Fitness Tests
iii. Psychomotor Tests
iv. Affective domain Tests

Answer: iv. Affective domain Tests. Social behaviour tests are part of the affective domain.

II. Answer briefly: Q1

Q. Explain Psychomotor test with an example.

Answer: Psychomotor tests assess the participant’s ability to perceive instructions and perform motor responses, often with measurements of movement. The participant performs a motor activity to the best of their ability and neuro-coordination. They include health related fitness, physical fitness, motor fitness and sports skill tests. Example: doing the maximum number of sit-ups in 1 minute, or a sports skill test of dribbling.

II. Answer briefly: Q2

Q. Demonstrate with examples the difference between Physical and Psychomotor test.

Answer: A physical test measures the size or components of the body with only the physical presence of the subject and no effort from the subject; examples: height, weight, skinfolds, a blood test, an X-ray. A psychomotor test needs the subject to perform a movement at full effort and coordination; examples: sit-ups, a sprint, a balance test or a skill test.

III. Answer in 150-200 words: Q1

Q. Discuss the classification of tests with suitable examples

Answer: Skill and fitness tests alone cannot fully judge an athlete, because body build, motivation and concentration also affect performance. So tests are classified by their nature and purpose:

  • Psychomotor tests: check the ability to perceive instructions and make motor responses. Four kinds: health related fitness tests (BMI, heart rate, lung capacity), physical fitness tests (moderate to vigorous activity), motor fitness tests (balance, agility, hand-eye coordination) and sports skill tests.
  • Anthropometric tests: the science of the body’s surface measurements: body weight, height, waist-hip ratio, BMI; skeletal diameters such as bi-acromial (shoulder) and bitrochanteric (hip) width; circumferences of chest, arm, thigh and calf.
  • Physical tests: body size or components with no effort from the subject: height, weight, skinfolds, blood test, X-rays.
  • Affective domain tests: feelings and relationship behaviour through pen-paper tests, interviews or projective methods: personality, social behaviour and stress tests.
  • Cognitive domain tests: knowledge and mental abilities: attention span, concentration, focus, intelligence and creativity.

5 Exercises after 6.4: Test Administration

I. Tick the correct options: Q1

Q. Collection of score sheet is a___________ function.
i. Pre-test
ii. Testing
iii. Post-test
iv. None of Above

Answer: iii. Post-test. Keeping all answer or score sheets in a safe place is the first post-test function.

I. Tick the correct options: Q2

Q. Testing of scientific authenticity of test is done in which phase?
i. Pre-test
ii. Testing
iii. Post-test
iv. None of Above

Answer: i. Pre-test. The scientific authenticity of the test is considered during pre-planning.

II. Answer briefly: Q1

Q. Write the guidelines of Testing operation phase.

Answer: (1) Check all equipment and facilities and place them properly before the subject arrives. (2) Give all instructions, explanation, demonstration and layout plan well in advance. (3) Give a short warm-up before a psychomotor test to avoid injury and help performance. (4) Use motivation strategies so that subjects perform their best. (5) Ensure safety precautions during explanation and demonstration. (6) Cross-check all necessary points from the checklist during testing.

II. Answer briefly: Q2

Q. Explain pre planning of test administration.

Answer: Pre-planning is the first phase. (1) A test planning document is prepared keeping all stakeholders of the test in mind. (2) Testing stations, score sheets or questionnaires, grouping and the test layout are prepared before testing. (3) The testing purpose, scientific authenticity of the test, group size, age and sex are considered. (4) The test is planned to be economical in cost of equipment, time and number of personnel.

III. Answer in 150-200 words: Q1

Q. Discuss Test administration guidelines by giving suitable example

Answer: Test administration is the total organisation, management, execution and supervision of tests, with follow-up, reporting and use of the results. Inaccurate testing usually comes from not knowing the procedure. It has three phases:

  • Pre-planning: a planning document for all stakeholders; testing stations, score sheets, groups and layout ready; purpose, scientific authenticity, group size, age and sex considered; economical in equipment, time and personnel.
  • Testing operation: equipment checked and placed before the subject arrives; instructions, explanation and demonstration given in advance; short warm-up before psychomotor tests; motivation; safety precautions; the checklist cross-checked.
  • Post-test functions: score sheets kept safe and raw scores converted to standard scores or compared with norms; scores interpreted with statistics; results shown in tables, graphs and profiles; a report prepared.

Example: for a BMI test of Class 11, the teacher books the hall, arranges a stadiometer and weighing machine and prints score sheets (pre-planning); checks that the scale reads zero, demonstrates the posture and records each student’s height and weight (testing operation); then computes every BMI, compares it with the BMI table, prepares a class chart and writes a report (post-test).

6 Extension Activity: BMI and Waist Hip Ratio

Extension Activity

Q. Record the height and weight of all students in your class. Find the BMI by applying formula. Find the Waist Hip Ratio using the given formula.

Answer (method and sample record): Measure height (cm) and weight (kg); measure waist and hip girth with a tape in the same unit. Then BMI = weight (kg) ÷ height (m)², and WHR = waist girth ÷ hip girth. A sample record:

Student Height Weight BMI Class Waist / Hip (cm) WHR
A (boy) 170 cm 60 kg 60 ÷ 2.89 = 20.8 Normal 74 / 90 0.82
B (girl) 155 cm 40 kg 40 ÷ 2.4025 = 16.6 Underweight 62 / 84 0.74
C (boy) 165 cm 75 kg 75 ÷ 2.7225 = 27.5 Overweight 88 / 95 0.93

Compare each BMI with the BMI table (normal 18.5-24.9) and each WHR with the WHO values (0.9 or less for men, 0.85 or less for women). Student C needs attention on both.

7 Exercises after the BMI, WHR and Skinfold Sections

I. Tick the correct options: Q1

Q. Skinfold technique is used to measure
i. weight
ii. fat percentage
iii. girth measurement
iv. over fatness

Answer: ii. fat percentage. Skinfold thickness (skin plus subcutaneous fat) is used to estimate body fat percentage.

I. Tick the correct options: Q2

Q. WHR is calculate by
i. multiplying waist by hip measurement
ii. adding hip by waist measurement
iii. dividing hip by waist measurement
iv. subtracting waist from hip measurement

Answer: iii, since it is the only option that divides. The option lists the two girths the other way round; the correct order is: WHR = waist girth ÷ hip girth (Gw ÷ Gh).

II. Answer briefly: Q1

Q. What is BMI?

Answer: Body Mass Index (BMI) is a measure derived from body mass and stature, used to assess the normalcy of body weight. BMI = body mass (kg) ÷ stature (m)². A BMI of 18.5-24.9 is normal weight; 25.0-29.9 is overweight; 30 and above is obesity.

II. Answer briefly: Q2

Q. What is WHR?

Answer: The waist to hip ratio (WHR) is the waist girth divided by the hip girth (WHR = Gw ÷ Gh), in any one unit. It shows the possible health risk (coronary heart disease) and whether the figure is apple- or pear-shaped. WHO healthy values: 0.9 or less for men and 0.85 or less for women.

II. Answer briefly: Q3

Q. What is Overweight and obesity?

Answer: Overweight is a body weight that exceeds some average for stature (and perhaps age); it often comes with extra fat, but not always (male power athletes). Obesity refers to people at the extreme of the overweight continuum: the overfat condition that comes with diseases of the obese syndrome such as glucose intolerance, type 2 diabetes, hypertension and a higher risk of coronary heart disease and cancer. By BMI, 25.0-29.9 is overweight and 30 or more is obesity.

III. Answer in 150-200 words: Q1

Q. Vilas, a male person whose weighs is 90 kg and his height is 1.7 m. Calculate his BMI. Also state the category in which he falls.

Answer: BMI = body mass (kg) ÷ stature (m)².
Stature² = 1.7 × 1.7 = 2.89.
BMI = 90 ÷ 2.89 = 31.1 kg/m² (31.14).

On the BMI table: below 18.5 underweight; 18.5-24.9 normal weight; 25.0-29.9 overweight; 30.0-34.9 class I obesity; 35.0-39.9 class II obesity; 40 and above class III obesity. Vilas’s BMI of 31.1 lies in 30.0-34.9, so he falls in class I obesity.

He should be advised regular workouts and improved dietary habits, and his body fat can be checked further with the waist-hip ratio and skinfolds, because BMI alone has only a moderate link with body fat.

IV. Complete the diagram

Q. Complete the diagram about some of the tests.

Body Mass Index Waist to Hip Ratio Skinfold Measures
Purpose of test To assess the normalcy of body weight for height (underweight, normal, overweight, obese) To find the ratio of waist to hip girth, which is related to the risk of coronary heart disease; shows apple or pear shape To measure the thickness of skin and subcutaneous fat, used to estimate body fat percentage
How the test is administered Measure weight (kg) and height (m); BMI = kg ÷ m²; compare with the BMI table Measure waist girth and hip girth with a tape in the same unit; WHR = waist ÷ hip; compare with WHO values (0.9 men, 0.85 women) Lift the fold with thumb, forefinger and middle finger of the left hand; apply calliper jaws about ½ cm below; pressure 10 g/mm²; read after about 2 s (Harpenden, Lange or Lafayette calliper)
V. Case Study

Q. BMI is considered a very useful test for body composition. People with high BMI are advised to workout and pay attention to their weight with the help of workout and improvement in their dietary habits. Based on this answer the following questions:-

a) What is the range for Normal BMI?
Answer: 18.5-24.9.

b) 30-34.5 is the range for ___________.
Answer: class I obesity (the BMI table gives class I obesity as 30.0-34.9).

c) A person with BMI 26 is _____________.
Answer: overweight (25.0-29.9).

d) Calculate BMI for a male whose weight is 90kg and his height is 1.7m.
Answer: BMI = 90 ÷ (1.7 × 1.7) = 90 ÷ 2.89 = 31.1, class I obesity.

VI. Art Integration

Q. Design Posters for the Physical Education Testing area, giving instructions and illustrations for each test.

Answer (a model plan): Make one A3 poster for each station, with a large title, a simple drawing and three to four short instruction lines.

  • BMI station: drawing of a student against the wall with a headpiece, and a weighing scale. “Remove shoes · stand straight, heels to wall · height in metres, weight in kg · BMI = kg ÷ m².” Add the BMI class table.
  • WHR station: apple and pear figures with tape lines. “Measure the waist at the narrowest part of the trunk and the hips at the widest · same unit · WHR = waist ÷ hip · healthy: men 0.9 or less, women 0.85 or less.”
  • Skinfold station: drawing of a calliper on a pinched fold and the three sites. “Lift the fold with the left hand · jaws ½ cm below · read after 2 seconds · men chest, abdomen, thigh; women triceps, suprailiac, thigh.”
  • General poster: “Wear sports kit · warm up before movement tests · follow the tester’s demonstration · safety first.”