Exam-useful questions from this chapter, grouped by marks, each with a full model answer. Try writing the answer yourself first, then check it against this one.
1 2-Mark Questions
Q. Define kinesiology.
Answer: Kinesiology is the study of human movement and muscular function. The word comes from the Greek kinesis (movement) and logos (to study). Burke (1977): kinesiology is studying the movement behaviour of all living organisms.
Q. Define biomechanics.
Answer: Biomechanics is the study of the mechanics related to the functional and anatomical analysis of biological systems, mainly humans (Greek bios = life + mechanics). James G. Hay: the science concerned with the internal and external forces acting on a human body and the effects produced by these forces.
Q. What is sports biomechanics?
Answer: Sports biomechanics is a quantitative study and analysis of athletes and sports activities. In simple terms it is the physics of sports: the laws of mechanics are applied to sport through mathematical modelling, computer simulation and measurement, explaining how and why the body moves as it does.
Q. Differentiate between statics and dynamics.
Answer: Statics studies systems at rest or moving with a constant velocity. Dynamics studies systems in motion in which acceleration is present; it is divided into kinematics and kinetics.
Q. Define the principle of force-time.
Answer: The modification of movement depends on the timing of force application as much as on the size of the force: Impulse = Force × Time, so applying force for longer gives greater motion. A longer time is also used to slow objects (catching) and land safely. Example: the sweep shot in hockey.
Q. Define the principle of optimal projection.
Answer: For most movements involving projectiles there is an optimal range of projection angles for a specific goal. The book gives 45 degrees as the optimal angle for maximum distance, for example a golf ball hit on a level plane.
Q. Differentiate between flexion and extension.
Answer: Flexion is bending a limb: the angle at the joint decreases (bending the elbow). Extension is straightening a limb: the angle at the joint increases. Extension is the opposite of flexion. Both occur in the sagittal plane about the frontal axis.
Q. What are supination and pronation?
Answer: Supination is turning the palm up; pronation is turning the palm down. Both are turning movements of the forearm and appear in the transverse plane in the book’s table.
Q. What is a plane of movement? Name the three planes.
Answer: A plane is an imaginary flat surface running through the body that divides it into two parts; movement takes place in it. The three planes are the sagittal (median), frontal (lateral or coronal) and transverse (horizontal) planes.
Q. Which plane and axis are involved when we kick a football?
Answer: Kicking is flexion and extension of the leg, so it takes place in the sagittal plane about the frontal axis.
Q. Name any four tools used in biomechanics to analyse competitive performance.
Answer: Any four of: GAIT analysis, cinematography, videography, electromyography (EMG), accelerometer, dynamometry, electrogoniometry, and the analysis of equipment such as shoes, surfaces and rackets.
2 3-Mark Questions
Q. Differentiate between kinetics and kinematics (any three points).
Answer: Kinetics: studies the forces that cause motion (gravity, friction, torque); explains the cause, the ‘why’; considers mass and external forces; treated in terms of energy transformations; includes Newton’s laws of motion.
Kinematics: describes motion in terms of time, displacement, velocity and acceleration without reference to forces; the ‘how’; does not depend on mass; descriptive, based on observation; treated geometrically. Example: a moving train, the parabolic path of a football.
Q. Explain the principle of balance with an example.
Answer: Balance is a person’s ability to control body position relative to a base of support. Stability and mobility are inversely related. Balance depends on the centre of gravity, stability and equilibrium. Stability increases with a wider base of support, a lower centre of gravity and more body mass, and is greatest when the line of gravity falls in the middle of the base. Example: sumo wrestlers take a very wide, low stance and train for a large mass.
Q. Explain the coordination continuum principle.
Answer: Coordination is how muscle actions and segment motions are timed. The best timing depends on the goal: high-force movements use more simultaneous muscle actions and joint rotations (weightlifting); low-force, high-speed movements use more sequential actions (a baseball pitcher). These two strategies form a continuum, and most motor skills fall somewhere between them.
Q. Differentiate between abduction and adduction with examples.
Answer: Abduction moves a limb away from the body’s centreline, for example raising the arm sideways. Adduction moves a limb towards the centreline, bringing the arm back down to the side. Both happen in the frontal plane about the sagittal axis; examples are jumping jacks and the star jump.
Q. Explain the three axes of the body.
Answer: (i) Sagittal (anteroposterior) axis: runs horizontally from back to front; perpendicular to the frontal plane; abduction and adduction.
(ii) Frontal (transverse, mediolateral) axis: runs side to side; perpendicular to the sagittal plane; flexion and extension.
(iii) Vertical (longitudinal) axis: runs from inferior to superior; perpendicular to the transverse plane; rotation.
Q. Write any three points showing how biomechanics helps in the prevention and rehabilitation of injuries and in exercise design.
Answer: (i) Analysing a runner’s style, arm swing, foot strike and trunk lean finds the cause of an injury.
(ii) It shows how to prevent the injury from recurring and which exercises help rehabilitation; techniques, equipment and training can be changed to prevent injuries.
(iii) Exercises are designed according to how the body adapts to biomechanical stress, e.g. a half-squat instead of a full squat to reduce stress on the knee joint and lower back.
Q. ‘Knowledge of biomechanics helps in the selection of players.’ Explain with an example.
Answer: Biomechanics gives teachers and coaches a better understanding of the body’s structural and functional qualities and of the internal and external forces acting on movement. With this, players are selected according to the demands of the sport. Example: in volleyball, taller players reach higher at the net for spiking and blocking, so tall players are preferred; in gymnastics, short players are preferred.
Q. Explain the concept of tri-planar motion with the example of walking.
Answer: Walking is called a sagittal plane movement, but that describes only the gross direction. At the hip, movement occurs in all three planes: flexion/extension (sagittal), adduction/abduction (frontal) and internal/external rotation (transverse). The hip decelerates internal rotation and adduction and accelerates external rotation and abduction. One motion with three components is tri-planar motion; all functional movements are three-dimensional, though single-plane descriptions are useful for gross patterns.
3 5-Mark Questions
Q. Explain the importance of kinesiology in the field of sports (any five points).
Answer: (i) Analysing human motion: insight into how motor skills and techniques can be improved.
(ii) Learning and improvement of motor skills: selecting the right exercise; teaching correct walking and running.
(iii) Preventing injuries: understanding injury mechanisms; preventive flexibility and strengthening; safe landing, falling and catching; re-educating weak muscles in rehabilitation.
(iv) Economy of movement: minimising movement to save energy in long-duration activities.
(v) Effectiveness of movement: correcting technique, e.g. body position in the snatch.
(vi) Clinical purposes: postural analysis and corrective exercise.
(vii) Designing exercise and conditioning: correct sit-up position.
(viii) Self-realisation: matching performer and activity.
(ix) Benefit to physiotherapists: safety, effectiveness and efficiency. (Any five.)
Q. Explain the importance of biomechanics in the field of sports (any five points).
Answer: (i) Analysing competitive performance with GAIT analysis, videography, EMG, dynamometry and electrogoniometry.
(ii) Development of motor abilities: force, speed, endurance, coordination and flexibility through systematic training.
(iii) Diagnostic teaching and coaching: discovering an athlete’s needs and designing the training schedule.
(iv) Designing equipment: spikes, studs, swimming costumes, hockey sticks, light helmets.
(v) Changing rules for safety and performance.
(vi) Evaluating and selecting techniques: e.g. a bullet start for a short sprinter.
(vii) Selection of players: short for gymnastics, tall for volleyball.
(viii) Designing exercises: half-squat instead of full squat.
(ix) Prevention and rehabilitation of injuries. (Any five.)
Q. List the principles of biomechanics and explain any two in detail.
Answer: The nine principles: Force-Motion, Force-Time, Inertia, Range of Motion, Balance, Coordination Continuum, Segmental Interaction, Optimal Projection and Spin.
Force-Time: the change in movement depends on the timing of force application as much as on its size; Impulse = Force × Time; a longer time of force application gives greater motion and is also used in catching and safe landing. Example: the sweep shot in hockey gives more power than a hit.
Inertia: the property of all objects to resist a change in their state of motion; measured by mass (linear) and moment of inertia (angular); it resists motion but can also be used to transfer energy between segments. Example: a shot put needs more force to stop than a netball because it has more inertia.
Q. Explain the eight types of body movements.
Answer: (i) Flexion: bending a limb; the joint angle decreases.
(ii) Extension: straightening a limb; the angle increases; opposite of flexion.
(iii) Abduction: moving a limb away from the body’s centreline.
(iv) Adduction: moving a limb towards the centreline.
(v) Rotation: movement around the long axis.
(vi) Circumduction: a combination of flexion, extension, abduction and adduction; at ball and socket joints such as the shoulder and hip.
(vii) Pronation: turning the palm down.
(viii) Supination: turning the palm up.
Q. Explain the three planes of the body with the movements and sports examples of each.
Answer: (i) Sagittal (median) plane: vertical; divides the body into right and left parts; flexion and extension; kicking a football, chest pass in netball, walking, jumping, squatting.
(ii) Frontal (lateral or coronal) plane: vertical; divides the body into anterior and posterior parts; abduction and adduction; jumping jacks, raising arms and legs sideways, cartwheel.
(iii) Transverse (horizontal) plane: horizontal; divides the body into superior and inferior parts; rotation; hip rotation in a golf swing, twisting in discus, pivoting in netball, spinning in skating.
The centre of gravity is the point where the three planes intersect.
Q. What is kinesiology? How is it related to biomechanics? Write any three of its importance in sports.
Answer: Kinesiology (kinesis = movement, logos = to study) is the scholarly study of human movement and muscular function; it draws on biomechanics, anatomy, physiology and neuroscience and views the body as a purposeful machine.
Relation: kinesiology is the science of movement through anatomy and mechanics; biomechanics, the analysis of forces and the application of physics to the body, is one of its subdisciplines and its central part.
Importance (any three): analysing human motion; preventing injuries through anatomic knowledge; economy and effectiveness of movement; clinical posture analysis; designing exercise and conditioning; benefit to physiotherapists (safety, effectiveness, efficiency).
4 Case Studies
(A) 1 mark The vertical sheet that divides the body into left and right sides is the:
(A) Frontal plane (B) Sagittal plane (C) Transverse plane (D) Coronal plane
Answer: (B) Sagittal plane
(B) 1 mark The axis that runs from left to right through the centre of the body is the:
(A) Vertical axis (B) Sagittal axis (C) Frontal axis (D) Longitudinal axis
Answer: (C) Frontal axis
(C) 1 mark The sagittal axis is also known as the:
(A) Anteroposterior axis (B) Mediolateral axis (C) Longitudinal axis (D) Vertical axis
Answer: (A) Anteroposterior axis
(D) 1 mark The horizontal sheet at the waist, dividing upper and lower halves, is the:
(A) Sagittal plane (B) Median plane (C) Frontal plane (D) Transverse plane
Answer: (D) Transverse plane
(A) 1 mark The sweep shot illustrates the principle of:
(A) Inertia (B) Force-Time (C) Spin (D) Balance
Answer: (B) Force-Time
(B) 1 mark The shot put and netball comparison illustrates:
(A) Inertia (B) Range of motion (C) Optimal projection (D) Segmental interaction
Answer: (A) Inertia
(C) 1 mark The dart and javelin comparison illustrates:
(A) Coordination continuum (B) Spin (C) Range of motion (D) Force-motion
Answer: (C) Range of motion
(D) 1 mark Impulse, which explains the sweep shot, is equal to:
(A) Mass × Velocity (B) Force ÷ Time (C) Mass × Acceleration (D) Force × Time
Answer: (D) Force × Time
(A) 1 mark In biomechanics, tools like these are mainly used for:
(A) Changing the rules of the game (B) Selling equipment (C) Analysing the efficient structure of competitive performance (D) Counting spectators
Answer: (C) Analysing the efficient structure of competitive performance
(B) 1 mark Describing speed, stride length and acceleration without the forces is:
(A) Kinematics (B) Kinetics (C) Statics (D) Anthropometry
Answer: (A) Kinematics
(C) 1 mark Studying the forces that produce the changes is:
(A) Kinematics (B) Kinetics (C) Statics (D) Kinesiology alone
Answer: (B) Kinetics
(D) 1 mark Which of these is another tool the book lists for the same purpose?
(A) Barometer (B) Thermometer (C) Stopwatch only (D) Dynamometry
Answer: (D) Dynamometry