The essence of this chapter for last-minute revision: definitions, key facts and tables. The full notes, with the whole explanation, are available separately.
1 The chapter in one line each
Exploring Mixtures and their Separation
1 · Types of mixturesHomogeneous stays uniform, heterogeneous does not
2 · Solutions and concentrationSolute in solvent, measured as % m/m, % m/v, % v/v
3 · SolubilityHow much can dissolve, and how that changes with temperature
4 · Separating homogeneous mixturesCrystallization, distillation, paper chromatography
5 · Separating heterogeneous mixturesSeparating funnel, sublimation, alloys
6 · Suspensions and centrifugationSpinning to settle the heavier particles
7 · ColloidsNot a solution, not a suspension, something in between
8 · Tyndall effectWhy some mixtures make a light beam visible
2 Definitions to learn by heart
All definitions in one place
Homogeneous mixture (solution)Same composition throughout; sugar solution, vinegar, soda water
Heterogeneous mixtureComposition varies from place to place; particles often visible and may settle
ConcentrationAmount of solute dissolved in a given amount of solvent or solution
SolubilityMaximum amount of a substance that dissolves in a fixed quantity of solvent at a given temperature
Saturated solutionA solution that cannot dissolve any more solute at that temperature
CrystallizationForming crystals from a saturated solution by controlled cooling, to obtain or purify a solid
DistillationSeparates miscible liquids whose boiling points differ by at least about 25°C, by boiling off and re-condensing the more volatile one
Fractional distillationSeparates liquids whose boiling points differ by less than 25°C, using repeated vaporisation and condensation
Paper chromatographySeparates components of a mixture by their different rates of movement through paper, carried by a solvent
Sublimation / depositionSolid straight to vapour on heating, below its melting point / vapour straight back to solid on cooling
AlloyHomogeneous mixture of two or more metals, or a metal and a non-metal; cannot be split by physical methods
SuspensionHeterogeneous mixture with visible, undissolved particles that settle if left undisturbed
CentrifugationSpinning at high speed: the centrifugal force moves heavier particles outwards, where they settle at the bottom of the tube, leaving the lighter liquid on top
CoagulationA coagulant (such as alum) makes fine suspended particles clump into larger, settleable lumps
ColloidParticles too small to settle or be seen with the naked eye, but large enough to scatter light (1-1000 nm)
Tyndall effectScattering of light by the particles of a colloid or suspension, making a light beam’s path visible; named after John Tyndall
EmulsionA colloid in which both the dispersed phase and the dispersion medium are liquids
3 Stating concentration: three methods
| Method | Formula | Best suited for | Typical example |
|---|---|---|---|
| Mass by mass % (% m/m) | (mass of solute / mass of solution) × 100 | Solids in solids or liquids, weighed easily | Milk powder, spice mixes, food labels |
| Mass by volume % (% m/v) | (mass of solute / volume of solution) × 100 | A solid dissolved in a liquid, volume easier to measure | 5% glucose solution, 0.9% saline |
| Volume by volume % (% v/v) | (volume of solute / volume of solution) × 100 | Two liquids that mix completely | Vinegar, perfumes, cosmetics |
4 Solution, colloid and suspension, side by side
| Property | Solution | Colloid | Suspension |
|---|---|---|---|
| Nature | Homogeneous | Looks homogeneous | Heterogeneous |
| Particle size | Less than 1 nm | 1 to 1000 nm | More than 1000 nm |
| Visible to the eye | No | No | Yes |
| Separated by filtration | No | No | Yes |
| Settles on standing | Never | Never | Yes |
| Tyndall effect | No | Yes | Yes |
5 Separation techniques at a glance
| Technique | Separates | Based on |
|---|---|---|
| Crystallization | A pure solid from a saturated solution | Solubility falling as temperature falls |
| Distillation | Miscible liquids, boiling points ≥ ~25°C apart | One vaporises and condenses before the other boils |
| Fractional distillation | Miscible liquids with close boiling points | Repeated vaporisation and condensation |
| Paper chromatography | Components of a coloured or dissolved mixture | Different rates of movement through paper |
| Separating funnel | Two immiscible liquids | Difference in density |
| Sublimation | A subliming solid from one that does not sublime | Direct solid-to-vapour change on heating |
| Centrifugation | Very fine suspended particles | Spinning throws denser particles outward |
| Coagulation | Very fine suspended particles | A coagulant clumps particles into larger lumps |
6 Numbers and facts worth remembering
25°Cminimum boiling-point gap for simple distillation to work cleanly
1-1000 nmparticle size range of a colloid
0.9%m/v sodium chloride, usual strength of a saline drip; safe for blood and replaces lost fluids in the body
- Acetone (56°C) and water (100°C): a 44°C gap, cleanly separated by simple distillation
- Brass: about 80% copper, 20% zinc · Bronze: about 80% copper, 20% tin · Stainless steel: usually iron with carbon (about 0.03-0.8%), chromium (16-18%), nickel (10.0-14.0%) and molybdenum (2.0-3.0%)
- Milk, vanishing cream: oil-in-water emulsions · Butter, cold cream: water-in-oil emulsions
- Solid solubility generally rises with temperature; gas solubility generally falls with temperature
- Slow cooling gives larger, shiny, well-shaped crystals (Activity 5.3); that rapid cooling gives smaller, less well-formed ones is the hypothesis the book asks you to test
7 People and terms to name in an answer
| Name / term | Why it matters |
|---|---|
| Dilip Mahalanabis | Indian paediatrician who formulated ORS to treat dehydration; concentration must be exact |
| John Tyndall | Scientist after whom the light-scattering Tyndall effect is named |
| Kannauj (Deg-Bhapka) | India’s perfume capital; traditional distillation method used to make Mitti ka Ittar |
| Panga salt / karkatch salt | Traditional Indian salt crystallization: panga salt by boiling concentrated sea brine, karkatch salt by evaporating sea water |
| Paperfuge | Hand-powered centrifuge of cardboard and string; separates blood without electricity |
| Dispersed phase / dispersion medium | The solute-like part of a colloid / the substance it is spread through |
| Emulsifying agent | Keeps an emulsion’s two liquids from separating, e.g. the protein in milk |
Quick Revision: read this the night before the exam
- Homogeneous mixtures (solutions) are uniform throughout; heterogeneous mixtures are not.
- Concentration is stated as % m/m, % m/v or % v/v, depending on what is convenient to measure.
- Solid solubility generally rises with temperature; gas solubility generally falls with temperature.
- Crystallization separates a pure solid from a saturated solution by controlled cooling.
- Distillation needs a boiling-point gap of at least about 25°C; fractional distillation handles smaller gaps.
- Paper chromatography separates components by how fast they travel through paper with a solvent.
- A separating funnel splits immiscible liquids using their density difference; the denser one drains first.
- Sublimation takes a solid straight to vapour; deposition takes vapour straight back to solid.
- Alloys are homogeneous mixtures of metals, but physical methods cannot separate them.
- Centrifugation and coagulation both help settle out very fine suspended particles.
- Solutions, colloids and suspensions differ mainly in particle size, and only colloids and suspensions show the Tyndall effect.
- An emulsion is a colloid of two liquids, stabilised by an emulsifying agent.
More for this chapter