All the questions the NCERT textbook Exploration, Chapter 11, “Reproduction: How Life Continues” asks inside the chapter (Think It Over, the activities and all eleven Pause and Ponder questions), then all thirteen questions from the “Revise, Reflect, Refine” section exactly as they are printed in the book, and finally The Journey Beyond and The Quest Continues, with a full model answer under each. Write your own answer first, then compare.
1 Think It Over
Q. (a) When does a farmer prefer asexual or sexual methods of reproduction for crops production? (b) Why do you think most complex animals and flowering plants use sexual reproduction, while many simple organisms, like yeast and hydra mainly reproduce asexually?
Answer: (a) A farmer prefers asexual methods (cutting, grafting, layering, tissue culture) when he wants many plants that are exact copies of a good variety, quickly and on a large scale, as with sugarcane, potato, banana or roses. He prefers sexual methods (seeds, hybridisation) when he wants new combinations of characters, such as new high-yielding or disease-resistant varieties.
(b) Sexual reproduction mixes characters from two parents, so the offspring are varied; this variation helps complex organisms adapt to changing environments over many generations. Simple organisms like yeast and hydra reproduce asexually because it needs only one parent and is fast, letting them increase their numbers quickly when conditions are favourable.
2 Activity 11.1: Cutting, Grafting and Layering
Q. Interact with gardeners or farmers and observe the techniques of cutting, grafting and layering. While observing cutting: (i) Does the gardener cut the overgrown branches of a plant at the end of its growing season? (ii) Note the average length of the cuttings. (iii) Count the number of nodes and internodes on the cuttings. Plant the cuttings, water them regularly and observe the change, if any.
Answer: Observations will vary with the plant. Typically the gardener prunes overgrown branches at the end of the growing season and prepares stem cuttings carrying several nodes, with internodes between them (measure and record their average length). Cuttings, with the leaves removed from the lower half, planted up to about half their length at an angle of 45-60° in soil mixed with compost and watered regularly develop roots and new shoots from the nodes over the following days or weeks. In grafting, the stem piece of Plant B joins with Plant A and grows along with it; in layering, roots appear from the buried part of the twig after 10-15 days. All these are asexual methods that give plants identical to the parent.
3 Activity 11.2: Budding in Yeast
Q. Observe a drop of the active yeast mixture under a compound microscope. Do you observe any small, round outgrowths (buds) emerging from the parent yeast cells? Do these features indicate that the yeast is duplicating? How do these observations help you in understanding reproduction in yeast?
Answer: Yes, small round buds are seen on many yeast cells, as in Fig. 11.6. This shows that the yeast is multiplying: each bud grows from the parent cell and later separates as a new yeast cell. So yeast reproduces asexually by budding, and it happens quickly in warm sugar solution.
4 Activity 11.3: Mould on Bread
Q. Observe the moist bread or roti every day. After three days, do you notice the growth of mould? Under the microscope, do you observe thread-like structures with a round sac at the tip? Do you also see tiny round structures (spores) inside the sac? Where did the mould on your bread slice come from?
Answer: Yes, after about three days fuzzy mould grows on the moist bread. Under the microscope it shows thread-like hyphae with round sacs at their tips, and many tiny round spores inside the sacs (as in Rhizopus). The mould was not present on the fresh bread; it grew from spores already floating in the air, which settled on the warm, moist bread and began reproducing rapidly. This is spore formation, a method of asexual reproduction.
5 Activity 11.4: How Many Combinations?
Q. Take three pairs of beads, each pair representing two contrasting characters. Make combinations by randomly picking one bead from each pair. How many combinations can you make with just these three pairs of characters? Imagine how many combinations are possible with 23 pairs of chromosomes.
Answer: Each pair gives 2 choices, so three pairs give 2 × 2 × 2 = 8 combinations. With 23 pairs of chromosomes, the number is 2 multiplied by itself 23 times, which is about 84 lakh (8.4 million) different combinations in one person’s gametes, even before the two parents’ gametes combine. This is why children differ from their parents and from their siblings (identical twins are the exception).
6 Parts of a Flower
Q. How are the coloured and/or fragrant features of flowers useful for reproduction? Do you observe thin, flat, green covering and coloured projections present in both flowers and buds? Do you think that sepals protect flowers in the bud stage? Do all flowers have these two parts? What are the other parts of a flower? Can you guess the function of the most attractive part of a flower, the coloured petals?
Answer: Bright colours and fragrance attract pollinators such as insects and birds, which carry pollen from flower to flower. Yes, the green sepals cover the bud and protect the inner parts in the bud stage. Not all flowers have both sepals and petals clearly separate; in some flowers they are fused, and some flowers lack one of them. The other parts of a flower are the stamens (male part) and the pistil (female part). The coloured petals attract pollinators.
7 Activity 11.5: Studying Flowers
Q. Collect different types of flowers, observe each part from the outer whorl to the inner one, record the presence of sepal, petal, stamen and pistil in Table 11.1, guess the function of each part, and cut transverse and longitudinal sections of the ovary to observe them.
Answer: A complete flower (such as hibiscus or mustard) shows all four parts; some flowers lack stamens or pistil (for example, the separate male and female flowers of papaya or cucumber). Functions: sepals protect the bud; petals attract pollinators; stamens produce pollen containing male gametes; the pistil receives pollen on the stigma, the style connects it to the ovary, and the ovary contains ovules. The sections of the ovary show small, round ovules attached inside it, each containing an egg cell.
8 Activity 11.6: Is Pollination Needed for Fruits?
Q. Of the five treatments on the pea plant (bud wrapped; bud with stamens removed and wrapped; flower with stamens removed and wrapped; flower wrapped; flower uncovered), in which treatment(s) do you find the flowers are replaced by fruits? What can we infer from this activity? What do you think will happen if pollination does not occur?
Answer: Fruits form in all treatments except the one in which the stamens were removed from the flower bud (and the bud was covered): that flower never received any pollen. We infer that the transfer of pollen grains from the anther to the stigma, pollination, is necessary for fruit formation. If pollination does not occur, fertilisation cannot take place, so no seeds and fruits are formed.
9 Activity 11.7: Pollen and Seeds
Q. Using Table 11.3 (wind-pollinated grasses: about 5,00,000-10,00,000 pollen grains per flower and 50-200 seeds; insect-pollinated plants such as sunflower: about 20,000-40,000 pollen grains and 800-1,000 seeds), compare the two strategies in terms of pollen to seed ratio and efficiency of pollination and seed formation. Explain why producing a very large number of pollen grains can still be an effective pollination strategy.
Answer: Wind pollination: about 5,00,000 ÷ 200 = 2,500 to 10,00,000 ÷ 50 = 20,000 pollen grains are needed for each seed. Insect pollination: about 20,000 ÷ 1,000 = 20 to 40,000 ÷ 800 = 50 pollen grains per seed. So insect pollination is far more efficient: insects carry pollen directly from flower to flower, while wind scatters most pollen where no stigma is present. Still, producing huge amounts of light pollen works for wind-pollinated plants because it costs no pollinator, and among so many grains enough land on the long feathery stigmas for the plants to set seed.
10 Pause and Ponder 1, 2 and 3: Pollination and Seeds
Q. 1. In a china-rose (hibiscus or gudhal) plant, a pollen tube grows and continues through the style after pollen lands on the stigma. Which process is about to happen next? 2. Look at the pictures (Fig. 11.16) of calotropis (madar) seeds and dandelion seeds. Can you guess what kind of seed dispersal these seeds are adapted for? 3. A farmer plants two varieties of maize side by side, but notices that seeds form only when pollen from one variety reaches the stigma of the other. What type of pollination is this?
Answer: 1. Fertilisation: the male gamete will reach the ovule through the pollen tube and fuse with the egg cell to form a zygote.
2. Both have light seeds with silky or feathery hairs, so they are adapted for dispersal by wind.
3. Cross-pollination, because pollen from one plant reaches the stigma of another plant of the same type.
11 Pause and Ponder 4 and 5: External and Internal Fertilisation
Q. 4. Why do animals with external fertilisation generally produce more eggs than animals with internal fertilisation? 5. In animals, which fertilisation method the gametes are more protected?
Answer: 4. In external fertilisation the eggs and sperm are released into water, where many eggs are destroyed by water currents or eaten by other animals, so a large number must be laid for a few young to survive.
5. In internal fertilisation, because fertilisation takes place inside the female’s body and the fertilised egg or embryo is protected there.
12 Who Determines the Sex of a Baby?
Q. Females have XX and males have XY chromosomes. The mother always contributes an X chromosome to a baby and the father contributes either an X or a Y chromosome. Can you predict who determines the sex of a baby?
Answer: The father. The mother’s egg always carries X; if the sperm that fertilises it carries X the baby is a girl (XX), and if it carries Y the baby is a boy (XY).
13 Pause and Ponder 6, 7 and 8: Human Reproduction
Q. 6. Ravi suddenly notices that he is growing taller rapidly, his shoulders are broadening, and his voice cracks. What stage of life is he entering? 7. Rina’s period occurs every 28 days. Her last period was on the 5th of March. On which day is she most likely to get her next period? 8. A human zygote has just formed. How many chromosomes does it have?
Answer: 6. Puberty (adolescence), when the reproductive organs mature and the testes’ hormone brings about these body changes.
7. 28 days after 5 March: March has 31 days, so 26 days take her to 31 March and 2 more days to 2 April.
8. 46 chromosomes (23 from the sperm and 23 from the egg).
14 Pause and Ponder 9 and 10: Protection and Risks
Q. 9. What protective devices can be used during sexual activity to reduce the spread of STIs? 10. If a couple uses oral contraceptive pills but not condoms, which risks remain and why?
Answer: 9. Condoms, which act as a barrier and reduce the transmission of sexually transmitted infections (they also help prevent pregnancy).
10. The risk of sexually transmitted infections remains, because oral pills only alter the release of eggs by changing hormones; they do not stop the close physical contact through which infections pass. The pills may also have side effects.
15 Pause and Ponder 11: Long Dependence of Human Babies
Q. In many animals, the young ones can walk or find food soon after birth but human babies are completely dependent on adults for a long time. What might be some advantages and disadvantages of this for humans as a species?
Answer: Advantages: the long period of care gives time for the brain to develop and for children to learn language, skills and social behaviour from adults, and it builds strong family bonds. Disadvantages: the baby is helpless and vulnerable for a long time, parents must invest a lot of time, food and energy in each child, and humans have fewer young ones than many animals.
16 Removing anthers and dusting on foreign pollen
Q. A flower’s anthers are removed before it matures. Later, pollen from another plant of the same species is dusted onto its stigma and seeds are produced. Which process has been ensured here?
(i) Self-pollination (ii) Cross-pollination (iii) Fertilisation (iv) Tissue culture
Answer: (ii) Cross-pollination. Removing the anthers before the flower matures rules out self-pollination altogether, since that flower’s own pollen is never produced. When pollen from a different plant of the same species is then placed on the stigma, the pollen has moved from one plant’s anther to another plant’s stigma, which is exactly the definition of cross-pollination. Fertilisation and tissue culture are not the process described here: fertilisation is the fusion of the male gamete with the egg cell after pollination, which happens later, and tissue culture is an unrelated laboratory technique for growing plantlets from a shoot tip.
17 Ordering the stages of sexual reproduction
Q. Arrange the following stages of sexual reproduction in plants in the correct order:
(i) Pollen germination on stigma (ii) Fertilisation (iii) Pollination (iv) Formation of zygote
Answer: The correct order is (iii) Pollination, (i) Pollen germination on stigma, (ii) Fertilisation, (iv) Formation of zygote. Pollen must first be transferred to the stigma (pollination) before it can germinate there and grow a pollen tube down through the style. Only once the male gamete travels through this tube and reaches the ovule can fertilisation, the fusion of the male gamete with the egg cell, take place, and it is this fusion that produces the zygote.
18 Assertion and reason on implantation
Q. Assertion (A): The zygote formed after fertilisation immediately attaches to the uterus wall.
Reason (R): The uterus wall is always prepared to receive the zygote.
(i) Both A and R are true, and R is the correct explanation of A.
(ii) Both A and R are true, but R is not the correct explanation of A.
(iii) A is true, but R is false.
(iv) A is false, but R is true.
Answer: (iv) A is false, but R is true. A is false: the zygote first undergoes a series of mitotic divisions while travelling to the uterus, and only then implants into the inner lining of the uterus. R is accepted in the sense that the uterine lining thickens in every cycle to receive a zygote, although it is not ready at all times, since the lining is shed at menstruation and then rebuilt.
19 Why asexual offspring are genetically identical
Q. Why does asexual reproduction produce offsprings that are genetically identical to the parent?
Answer: Asexual reproduction involves only a single parent, so there is no second individual’s genetic material to mix in. Every asexual process described in the chapter, budding, spore formation and vegetative propagation alike, relies on mitosis, the type of cell division that produces daughter cells with the same number of chromosomes, and the same genetic content, as the parent cell. Because the offspring’s genetic material is copied directly from the one parent with no mixing, the offspring, called clones, come out genetically identical to it.
20 Why the menstrual cycle stops in pregnancy
Q. Explain why the menstrual cycle stops during pregnancy.
Answer: Menstruation happens only when a released egg is not fertilised: the thickened, blood-rich uterine lining built up to receive a zygote is no longer needed, so it sheds. Once fertilisation does occur and the zygote implants in the uterine lining, that same lining is now needed to nourish and support the growing embryo and, later, the foetus, so it is not shed. Because the whole point of menstruation is to clear away a lining that pregnancy is not using, the cycle of ovulation, lining build-up and shedding stops for as long as the pregnancy continues.
21 Colour of night-blooming flowers
Q. Why are flowers that bloom at night white or light in colour as compared to flowers that bloom during the day?
Answer: A flower’s bright colour is one of the ways it attracts its pollinators, but colour alone is not visible after dark, when the light needed to see hue is largely absent. A white or pale flower reflects what little light there is, moonlight or starlight, far more strongly than a deeply coloured one, making it stand out and remain visible to night-active pollinators such as moths. Day-blooming flowers, pollinated in full daylight, do not need this advantage and can instead invest in the bright, saturated colours that day-active insects and birds are drawn to.
22 Vegetative propagation and disease
Q. Why do vegetatively propagated plants tend to be more vulnerable to diseases than sexually reproduced plants?
Answer: Vegetative propagation uses only one parent and mitosis, so every plant produced this way is a genetically identical clone of the original, and an entire field or orchard raised from cuttings, grafts or tissue culture can end up genetically uniform. Sexual reproduction, by contrast, uses meiosis and the random combination of two parents’ chromosomes to produce genetically varied offspring. If a disease-causing organism can infect one genetically identical plant, it can infect every other plant with that same genetic make-up equally easily, so a vegetatively propagated population has no varied individuals that might resist it, while a sexually reproduced population’s genetic variation means at least some individuals are more likely to survive.
23 Self-pollination and genetic diversity
Q. If all flowers in a type of plant were only capable of self-pollination, how would it affect the genetic diversity over several generations? Explain.
Answer: In self-pollination, the pollen and the egg cell always come from the same plant, so each new generation combines only that one plant’s own genetic material with itself, rather than mixing in genes from a different individual. Repeated over many generations, this steadily narrows the range of gene combinations being produced, so the genetic diversity of the population would fall sharply compared with a population that could also cross-pollinate. Lower genetic diversity would leave the whole population more uniform and therefore more vulnerable together to a new disease or a changing environment, exactly as vegetatively propagated, genetically identical plants are.
24 Producing identical plants quickly
Q. A farmer wants to produce a large number of genetically identical plants quickly. Suggest suitable reproduction methods and explain why they are effective.
Answer: The farmer should use methods of vegetative propagation, such as cutting, grafting, layering, or, for the largest numbers in the shortest time, tissue culture. These are all asexual methods that use only one parent plant and rely on mitosis, so every new plant produced is a genetically identical copy of the parent, meeting the requirement of genetic identity directly. Tissue culture in particular can mass-produce plantlets from a tiny piece of the shoot tip (apical meristem) under laboratory conditions, which is why it has transformed banana farming by rapidly supplying large numbers of healthy, uniform, virus-free plantlets.
25 Suresh’s pollen germination experiment
Q. Suresh prepares slides with pollen grains in different sugar concentrations (0%, 2.5%, 5%, 7.5%, 10%) to study the germination of pollen.
(i) What are the different hypotheses which can be tested using this set-up?
(ii) What parameters should be kept the same in this set-up?
Answer:
(i) The set-up can test hypotheses such as: pollen grains germinate better in a sugar solution of a particular concentration than in plain water (0%); germination improves as sugar concentration rises up to some optimum point; and germination declines again if the sugar concentration is raised too high, since a very concentrated solution can draw water out of the pollen grain rather than let it absorb any.
(ii) To make the comparison fair, every slide should be kept the same in every way except the one variable being tested, the sugar concentration. That means using the same type and quantity of pollen, the same temperature, the same amount of time before observation, the same slide and coverslip conditions, and observing all the slides under the microscope at the same magnification.
26 Identifying pollination types from pictures
Q. Look at the picture given below and think in line with the given prompts and find out which type(s) of pollination might have been followed in these flowers — Tomato (stamens cover the stigma), Wheat (flowers open after pollination), Papaya (male and female flowers are often borne on different papaya trees).
Answer: Tomato: self-pollination. The prompt says the stamens cover the stigma, so the flower’s own pollen falls directly onto its own stigma and pollinates it before pollen from another plant can reach it.
Wheat: self-pollination. The prompt says the flowers open after pollination, so pollination has already happened inside the closed flower with its own pollen; pollen from other plants gets no chance to reach the stigma first.
Papaya: cross-pollination. The prompt says male and female flowers are often borne on separate papaya trees; a female flower on such a tree has no pollen of its own, so pollen must be carried by an external agent from a male tree’s flower to the female tree’s flower, which is cross-pollination by definition.
27 The apple orchard pollination experiment
Q. In the lower Himalayan region of northern India, apples are an important cash crop that contribute significantly to farmers’ livelihoods. The fruit yield in apple cultivation is declining continuously, associated with climate change and a significant decline in the population of natural pollinators. A researcher-farmer group set up two experimental apple orchards at two distinct locations: Places A and B. In apple orchards at Place A, they allowed natural pollinators to pollinate the flowers of the apple. In apple orchards at Place B, they applied mixed farming techniques of beekeeping; along with honey, the farmer yielded apples. The yield of apples is depicted in Fig. 11.24, in terms of fruit setting (number of fruits per the total number of corresponding fruit-bearing branches) and fruit drop (premature falling of developing fruits) in the two types of experimental places of apple orchards.
(i) What are the hypotheses the researcher-farmers group has thought of for this investigation?
(ii) What are the different parameters in the experiment?
(iii) Compare and analyse the data of the two experimental orchards, Places A and B, in terms of high yields of apple fruits.
(iv) Based on your analysis, what do you infer from the data?
Answer:
(i) The likely hypothesis is that adding a managed bee colony alongside natural pollinators improves apple pollination, and so increases fruit setting and reduces fruit drop, compared with relying on natural pollinators alone.
(ii) The parameters are the presence or absence of a kept bee colony (the variable being changed between Place A and Place B), and the two things measured, the percentage fruit set and the percentage fruit drop. Other factors, such as the apple variety and climate, are not listed; for a fair comparison they would need to be similar at both places.
(iii) Reading the bar graph in Fig. 11.24: at Place A, with only natural pollinators, fruit set was about 26% and fruit drop was about 35%. At Place B, with an added bee colony, fruit set rose to about 40% while fruit drop fell sharply to about 8%. Place B therefore did better on both measures at once, a higher share of flowers going on to set fruit, and a much smaller share of those developing fruits being lost before they matured.
(iv) The data supports the hypothesis: introducing a managed bee colony alongside natural pollinators measurably improves pollination outcomes in apple orchards, most likely because more flowers receive adequate pollen when both natural pollinators and a kept bee colony are working together, which both raises fruit set and lowers the premature dropping of developing fruit. This fits the question’s own background: apple yields have been falling along with climate change and a decline in natural pollinators, and mixed farming with beekeeping is one practical way growers can make up for it.
28 Examining the “ovulation always on day 14” claim
Q. A student claims, “In humans, ovulation always happens on day 14 of the menstrual cycle.” Critically examine this claim and state whether the claim is correct or not. Give at least two reasons for your answer.
Answer: The claim is not correct as an absolute rule, though day 14 is a common approximation. Two reasons: first, the chapter states that the cycle typically repeats every 21 to 35 days (often around 28 days), and it places ovulation on day 14 only for a typical 28-day cycle (Fig. 11.21) and says it happens around the 14th day, so in cycles of other lengths ovulation need not fall on day 14. Second, even in women whose average cycle length is close to 28 days, the exact timing of ovulation can vary somewhat from month to month due to factors such as stress, illness or other changes in the body, so it is more accurate to describe ovulation as happening roughly once a month, around the middle of the cycle, than as fixed permanently to day 14 for everyone.
29 The Journey Beyond
Q. Read about the ‘Seed Village Programme’ (Beej Gram Yojana): why is it important to save indigenous seeds? Prepare a report on IVF, its uses and drawbacks. Survey crop fields and interact with farmers about crops grown by vegetative propagation and by seeds, indigenous and hybrid seeds and breeds. Explore pollination strategies and pollinators near your school. Observe L.S. and T.S. of fruits like lady finger, tomato and brinjal and link them with the internal structure of the ovary.
Answer: These are projects. Pointers: indigenous seeds are adapted to local soil and climate, preserve genetic diversity and let farmers save seed for the next season; IVF helps couples who cannot conceive naturally, but it is costly, may need several attempts and can have health risks; farmers usually grow sugarcane, potato and banana by vegetative propagation and wheat, rice and pulses from seed; pollinators such as bees and butterflies are declining due to loss of habitat, pesticides and climate change, which can be reduced by growing flowering plants and using fewer pesticides. In a T.S. of a tomato the seeds are seen attached to the fleshy central tissue inside chambers, matching the ovules attached inside the ovary of the tomato flower.
30 The Quest Continues
Q. Does a unicellular organism like amoeba or yeast ever ‘grow old’? When it divides, it produces almost two identical copies. So, does aging happen at all?
Answer: An open question for discussion. When an amoeba divides, the parent itself becomes the two daughter cells, so there is no old parent body left behind to die of old age in the usual sense. Scientists still study whether such cells slowly collect damage over many divisions, so the question does not have a simple final answer.