Covers T.R. Jain & V.K. Ohri (2026-27) ch 7-9. Based on NCERT Introductory Macroeconomics, Chapter 4 (Reprint 2026-27), the CBSE curriculum 2026-27 (Unit 3, 12 marks) and the CBSE Supplementary Reading Material.
- Tell ex ante (planned) values from ex post (actual) values
- Work out the consumption function, saving function, APC, APS, MPC and MPS and prove how they are related
- Find equilibrium income both with the 45° line diagram and with algebra
- Explain the investment multiplier, its round-by-round mechanism and the paradox of thrift
- Identify full employment, involuntary unemployment, excess demand and deficient demand, measure the gaps and state the measures to correct them
1 The model of this chapter and its two assumptions
- Macroeconomics builds models to explain the forces that decide the values of variables such as national income, the price level and the rate of interest
- It is hard to explain all variables at once, so while studying one variable we hold the others constant
- This is the assumption of ceteris paribus, which literally means “other things remaining equal”
- It works like solving two equations in x and y: solve for one variable in terms of the other first, then substitute to get the full solution
- In this chapter national income is determined under two assumptions: a fixed price of final goods and a constant rate of interest
- The model is based on the theory given by John Maynard Keynes
2 Ex ante and ex post values
In Chapter 2, consumption, investment and GDP were used in the accounting sense: what actually happened in a year. The same terms have a second meaning: what people planned to do.
The ex ante value of a variable (consumption, investment, output of final goods) is its planned value, what was planned to happen in a period.
The ex post value of a variable is its actual or accounting value, what actually happened in that period.
- A producer plans to add goods worth ₹100 to her stock by the end of the year: planned (ex ante) investment = ₹100
- An unforeseen rise in demand makes her sell goods worth ₹30 from her stock
- So her inventory rises by only ₹(100 − 30) = ₹70: actual (ex post) investment = ₹70
| Basis | Ex ante | Ex post |
|---|---|---|
| Meaning | Planned, what was intended | Actual, what really happened |
| Investment in the example | ₹100 | ₹70 |
| Used in | Theory of income determination (this chapter) | National income accounting (Chapter 2) |
| Equality | Ex ante demand = ex ante supply only at equilibrium | Ex post output = ex post C + I always (accounting identity) |
3 Aggregate demand and its components
Aggregate demand (AD) is the total ex ante (planned) demand for final goods and services in an economy in a period, that is, total planned expenditure on final goods.
Consumption demand (C)
Private final consumption expenditure of households
Investment demand (I)
Planned investment expenditure of firms
Government demand (G)
Government expenditure on final goods and services
Net exports (X − M)
Exports minus imports
- Full form:
- The main model of this chapter is the two-sector model (households and firms), so here
Aggregate supply (AS) is the total planned (ex ante) output of final goods and services in an economy in a period. At a fixed price it equals GDP (national income, Y).
4 The consumption function and the saving function
The consumption function
- The most important determinant of consumption demand is household income
- Even when income is zero some consumption still takes place; this part is independent of income
A consumption function describes the relation between consumption and income. The simplest form is …(4.1)
Autonomous consumption () is consumption that is independent of income; if consumption takes place even when income is zero, it is because of autonomous consumption. The book also calls it the subsistence consumption level of an economy, which stays more or less stable over time.
Induced consumption () is the part of consumption that depends on income; when income rises by ₹1, it rises by the MPC (c).
Marginal propensity to consume (MPC) and marginal propensity to save (MPS)
The marginal propensity to consume (MPC) is the change in consumption per unit change in income. It is denoted by c:
- The change in consumption () can never exceed the change in income (), so the maximum value of c is 1
- A consumer may not change consumption at all when income changes; then MPC = 0
- Generally (both values included): MPC = 0 (no rise in consumption), MPC = 1 (the whole extra income is consumed), (part of the extra income is consumed)
- Imagenia’s consumption function:
- Even with no income its citizens consume goods worth ₹100: autonomous consumption = 100
- Its MPC = 0.8: if income goes up by ₹100, consumption goes up by ₹80
Saving is that part of income that is not consumed:
The marginal propensity to save (MPS) is the change in saving per unit change in income. It is denoted by s:
Prove that MPC + MPS = 1 (the book’s derivation):
Average propensity to consume (APC) and average propensity to save (APS)
The average propensity to consume (APC) is consumption per unit of income:
The average propensity to save (APS) is saving per unit of income:
The saving function and the break-even point
The saving function describes the relation between saving and income: . Its intercept is (dissaving at zero income) and its slope is .
The break-even point is the level of income at which consumption equals income (), saving is zero () and . In the diagram the consumption function cuts the 45° line here.
- At income below break-even, consumption exceeds income; households sell old assets or borrow to finance it, which is called dissaving (negative saving)
- At income above break-even, consumption is less than income and saving is positive
- Dissaving at zero income is exactly equal to autonomous consumption ()
| Income Y (₹) | Consumption C (₹) | Saving S = Y − C (₹) | APC = C/Y | APS = S/Y | APC + APS |
|---|---|---|---|---|---|
| 0 | 100 | −100 | not defined | not defined | – |
| 250 | 300 | −50 | 1.2 | −0.2 | 1 |
| 500 | 500 | 0 | 1.0 | 0 | 1 |
| 750 | 700 | 50 | 0.933 | 0.067 | 1 |
| 1000 | 900 | 100 | 0.9 | 0.1 | 1 |
- Every ₹250 rise in income raises C by ₹200: MPC = 200 ÷ 250 = 0.8, MPS = 50 ÷ 250 = 0.2 (constant at every level)
- Break-even income: ₹500
- Saving function:
- Interpretation: below ₹500 of income Imagenia’s people dissave, above ₹500 they save; as income rises APC falls and APS rises

| Feature | APC | MPC |
|---|---|---|
| Formula | C/Y (ratio of totals) | ΔC/ΔY (ratio of changes) |
| Can exceed 1? | Yes, below break-even income (dissaving) | No, at most 1 |
| As income rises | Falls (when ) | Constant on a straight-line function |
| Sum rule | APC + APS = 1 | MPC + MPS = 1 |
| Zero or negative? | APS can be negative | MPS is not negative (0 to 1) |
Q. When income rises from ₹2,000 crore to ₹2,400 crore, consumption rises from ₹1,700 crore to ₹2,000 crore. Find MPC, MPS, and APC and APS at income ₹2,000 crore.
Given
= 2,400 − 2,000 = 400; = 2,000 − 1,700 = 300 (₹ crore)
To find
MPC, MPS, APC, APS
- Formula: (½)
- Substituting: 0.75 (½); 0.25 (½)
- At ₹2,000 crore: 0.85; 0.15 (½)
- Interpretation: 75% of extra income is consumed and 25% saved; 85% of total income is consumed
- Writing “MPC + APC = 1” is wrong. The correct pairs are MPC + MPS = 1 and APC + APS = 1
- Taking total C ÷ total Y (that is APC) when MPC is asked is wrong; MPC uses changes (ΔC ÷ ΔY)
- Believing APC can never exceed 1 is wrong; below break-even APC > 1
5 Investment
Investment is the addition to the stock of physical capital (such as machines, buildings, roads, anything that adds to the future productive capacity of the economy) and changes in the inventory (stock of finished goods) of a producer.
- Investment goods (such as machines) are also final goods; they are not intermediate goods like raw materials
- Machines produced in a year are not “used up” to produce other goods in that year; they yield services over many years
- Investment decisions by producers (such as buying a new machine) depend, to a large extent, on the market rate of interest
- For simplicity, firms are assumed to plan to invest the same amount every year: …(4.2)
Autonomous investment () is investment that does not depend on the level of income; it is a given (exogenous) positive constant in a year. In a diagram it is a horizontal line at height above the horizontal axis.
6 Determination of income in the two-sector model
6.1 The aggregate demand equation
Autonomous expenditure (A) is total expenditure that does not depend on income: . Of these, stays more or less stable, while undergoes periodic fluctuations.
6.2 Equation (4.3) is not an accounting identity
- Y on the left of (4.3) is ex ante output (planned supply); the right side is ex ante aggregate demand
- Ex ante supply equals ex ante demand only at equilibrium
- The accounting identity of Chapter 2 says that ex post output always equals ex post consumption + ex post investment
- If ex ante demand falls short of planned output, (4.3) does not hold; stocks pile up in warehouses, which is unintended accumulation of inventories
- This extra output shows up as unintended inventories inside ex post investment, so actual Y = actual (C + I) still holds
Inventories (stocks) are the part of output produced that is not sold and remains with the firm. A change in inventory is called inventory investment; a rise is positive and a depletion is negative inventory investment.
Planned inventory investment
- The firm decides to keep some stocks for various reasons
- Part of ex ante investment
Unplanned inventory investment
- Sales differ from planned sales, so the firm is forced to add to or run down stocks
- Shows only in ex post investment
6.3 Introducing the government
- The government’s main fiscal variables are tax (T) and government expenditure (G), both autonomous in the analysis
- G adds directly to aggregate demand, like spending by firms and households
- Taxes take part of household income away, so disposable income becomes and households consume a fraction of this
- The equation becomes:
- , like and , just adds to the autonomous term A; it does not change the analysis qualitatively, so the government is ignored for the rest of the chapter
- Without indirect taxes and subsidies, GDP is identically equal to national income, so Y is called GDP or national income interchangeably
Q. = 40, c = 0.8, = 10, G = 30, T = 25 (₹ crore). Find equilibrium income.
- Autonomous term:
- Equilibrium: ₹300 crore
- Check: = 300 − 25 = 275; C = 40 + 0.8 × 275 = 260; C + I + G = 260 + 10 + 30 = 300 = Y
7 Determination of equilibrium income in the short run
In microeconomics the demand and supply curves together decide price and quantity. Macroeconomics proceeds in two stages: first equilibrium with the price level fixed, then equilibrium with the price level allowed to vary.
- At the first stage the economy has unused resources (machinery, buildings, labour); the law of diminishing returns does not apply, so additional output can be produced without increasing marginal cost, and the price level does not change when output changes
- It is just a simplifying assumption, to be changed later
7.1 Graphical method
- Intercept form of a linear equation: in , a = intercept on the Y-axis (the value of Y when X is zero) and b = slope of the line ()
- By the same logic the consumption function is a straight line: intercept = , slope =
- The investment function is a horizontal line at height , the same whatever the level of income
- The aggregate demand function is obtained by vertically adding the consumption and investment functions; it shows ex ante demand

- In the figure OM = , OJ = and OL = (the letters of the book’s Fig. 4.4)
- The AD line is parallel to the consumption line because both have slope c; the vertical gap between them is everywhere
- The gap between the AD line and the investment line is consumption (C), which grows with income; so the AD curve moves further away from the investment curve as income rises
Aggregate supply: the 45° line
- At the first stage the price is fixed and unused resources of all types are available, so whatever the level of GDP, that much is supplied; the price level plays no role
- Such supply is shown by the 45° line, every point on which has the same horizontal and vertical coordinates
- Book example: if GDP is ₹1,000 at point A, ₹1,000 worth of goods will be supplied; this supply is at point B, where the vertical line at A meets the 45° line
Equilibrium
Equilibrium income is the level of income at which ex ante aggregate demand = ex ante aggregate supply. In the diagram it is the point E where the AD line cuts the 45° line.

7.2 Algebraic method
Q. If and , find equilibrium income.
Given
= 40, c = 0.8, = 10
To find
Equilibrium income Y
- Equilibrium condition: (½)
- (½)
- 250 (1)
- Interpretation: only at income 250 do households and firms together plan to buy exactly what producers plan to make
7.3 The adjustment mechanism: why the economy returns to equilibrium
| Income/output Y | C | S = Y − C | I | AD = C + I | Situation | Income will |
|---|---|---|---|---|---|---|
| 0 | 40 | −40 | 10 | 50 | AD > Y | rise |
| 100 | 120 | −20 | 10 | 130 | AD > Y | rise |
| 200 | 200 | 0 | 10 | 210 | AD > Y | rise |
| 250 | 240 | 10 | 10 | 250 | AD = Y, S = I | equilibrium |
| 300 | 280 | 20 | 10 | 290 | AD < Y | fall |
| 400 | 360 | 40 | 10 | 370 | AD < Y | fall |
Interpretation: income 200 is the break-even level (S = 0), but it is not equilibrium, because even there AD (210) > Y (200). Equilibrium is only where AD = Y.
When AD > planned output (left of E)
- People want to buy more than is produced
- Unplanned fall in inventories
- Producers raise output and employment
- Income rises to equilibrium
When AD < planned output (right of E)
- Not all that is produced is sold
- Unplanned accumulation of inventories
- Producers cut output and employment
- Income falls to equilibrium
7.4 The saving-investment approach (S = I)
- In the two-sector model and at equilibrium ; so at equilibrium ex ante saving = ex ante investment
- If ex ante S > ex ante I, spending is too low: unplanned accumulation of inventories, output falls
- If ex ante S < ex ante I: unplanned fall in inventories, output rises
- In example 4, and : , the same answer

Q. The saving function is and autonomous investment is ₹100 crore. Find equilibrium income and consumption at that income.
- Equilibrium condition: S = I (½)
- (½)
- ₹600 crore (1)
- Consumption: C = Y − S = 600 − 100 = ₹500 crore (1) [check: C = 50 + 0.75 × 600 = 500]
- Treating the break-even point (C = Y) as the equilibrium point (AD = Y) is wrong; at break-even S = 0, at equilibrium S = I
- “When S > I inventories fall” is wrong; S > I means spending is low, so inventories rise
8 Effect of an autonomous change in aggregate demand on income and output
Equilibrium income depends on aggregate demand, so when AD changes, equilibrium income changes. This can happen in any one or a combination of these ways:
Change in consumption
(i) a change in autonomous consumption , or (ii) a change in the MPC (c)
Change in investment
Investment does not depend on income, but other factors move it: availability of credit (easy credit encourages investment) and the interest rate (the cost of investible funds; at higher rates firms invest less)
- Before: , ⇒
- Investment rises to 20: 300
- Rise in investment = 10, but rise in income = 300 − 250 = 50, five times as much

- When autonomous investment rises, the AD₁ line shifts up in parallel to AD₂
- At the old income aggregate demand is now , which exceeds output by ; is the excess demand created by the rise in autonomous expenditure
- So is no longer equilibrium; the new equilibrium is where AD₂ cuts the 45° line, at
- Output and AD rise by , which is larger than the initial rise in autonomous expenditure
9 The multiplier mechanism
Why did a rise of 10 in investment raise income by 50? The answer lies in a process that runs round after round.
- Final goods are produced with labour, capital, land and entrepreneurship; without indirect taxes or subsidies the whole value of output is distributed as factor payments (wages, interest, rent, profit)
- So national income (the sum of factor payments) = value of the output of final goods (GDP)
- That is why an extra output of 10 becomes an extra income of 10
| Round | Rise in consumption | Rise in aggregate demand | Rise in output/income |
|---|---|---|---|
| Round 1 | 0 | 10 (autonomous increment) | 10 |
| Round 2 | (0.8)10 = 8 | 8 | 8 |
| Round 3 | (0.8)²10 = 6.4 | 6.4 | 6.4 |
| Round 4 | (0.8)³10 = 5.12 | 5.12 | 5.12 |
| Round 5 | (0.8)⁴10 = 4.096 | 4.096 | 4.096 |
| … | … | … | … |
| Total | 40 | 50 | 50 |
The book’s Table 4.1 “The Multiplier Mechanism in the Final Goods Market”, with the numbers filled in. After the first 4 rounds income has already risen by 29.52; the infinite series sums to 50. Total rise in consumption = 50 − 10 = 40.
The investment multiplier is the ratio of the total increment in the equilibrium value of final goods output (income) to the initial increment in autonomous expenditure: …(4.5). The book’s key-concept list also calls it the autonomous expenditure multiplier.
| MPC | MPS | Multiplier k | ΔY when ΔI = ₹100 crore |
|---|---|---|---|
| 0.5 | 0.5 | 2 | ₹200 crore |
| 0.75 | 0.25 | 4 | ₹400 crore |
| 0.8 | 0.2 | 5 | ₹500 crore |
| 0.9 | 0.1 | 10 | ₹1,000 crore |
- MPC = 0.75, ΔI = ₹200 crore; ΔY? k = 1 ÷ (1 − 0.75) = 4; ΔY = 4 × 200 = ₹800 crore
- k = 5, ΔY = ₹1,000 crore; ΔI? ΔI = ΔY ÷ k = 1,000 ÷ 5 = ₹200 crore
- ΔI = ₹500 crore gives ΔY = ₹2,000 crore; MPC? k = 2,000 ÷ 500 = 4; MPC = 1 − 1/4 = 0.75
- MPS = 0.1; k? k = 1 ÷ 0.1 = 10
Interpretation: the larger the share of extra income people spend, the larger the new demand in each round, so the larger the final effect on income.
- Writing k = 1/MPC is wrong; correct is k = 1/(1 − MPC) = 1/MPS. (At MPC = 0.8, 1/MPC gives 1.25; the correct k is 5)
- The multiplier works in reverse too: if investment falls by ₹100 crore and k = 4, income falls by ₹400 crore
- “The multiplier can be less than 1” is wrong; since 0 ≤ MPC ≤ 1, k ≥ 1
10 The paradox of thrift
Paradox of thrift: if all the people of the economy increase the proportion of income they save (that is, if the MPS of the economy increases), the total value of savings in the economy will not increase; it will either decline or remain unchanged. As people become more thrifty they end up saving less or the same as before.
- Start: = 40, = 10 (A = 50), MPC = 0.8 ⇒ = 250
- News of an imminent war or some other disaster makes people suddenly more thrifty: MPC falls from 0.8 to 0.5 (MPS rises from 0.2 to 0.5)
- At income 250, consumption (and AD) falls by (0.8 − 0.5) × 250 = 75; this is treated as an autonomous reduction in consumption
- An excess supply of 75, stocks pile up ⇒ producers cut output by 75 in the next round ⇒ income falls by 75
- With the new MPC 0.5, consumption falls by (0.5)75 ⇒ excess supply again ⇒ output falls further; the process is convergent
- Total fall in output: 150
- New equilibrium: [directly: ]
| MPC | Equilibrium income | Total saving S = Y − ( + cY) | |
|---|---|---|---|
| Before | 0.8 | 250 | 250 − (40 + 0.8 × 250) = 10 |
| After | 0.5 | 100 | 100 − (40 + 0.5 × 100) = 10 |
Interpretation: people wanted to save more, but income fell by 150 and total saving stayed at 10. Reason: at equilibrium S = I, and investment is fixed at 10, so saving cannot go beyond 10.

10.1 Parametric shift: parallel shift versus swing
A parametric shift is a change in the position of a line caused by a change in a parameter of its equation (the intercept or the slope). In AD = A + cY, when A changes the line shifts up or down in parallel; when c changes the line swings up or down about the same intercept.
| Change in parameter | Effect on the AD line | Equilibrium income |
|---|---|---|
| A (intercept) rises | Parallel shift up (Fig. 4.7) | Rises |
| A falls | Parallel shift down | Falls |
| c (slope) rises, MPS falls | Swings up, steeper | Rises |
| c falls, MPS rises | Swings down, flatter (Fig. 4.8) | Falls |
11 The effective demand principle
Effective demand principle: with a constant final goods price and a constant rate of interest in the short run, and aggregate supply perfectly elastic at that price, aggregate output is determined solely by the level of aggregate demand.
- The aggregate demand at the equilibrium point is called effective demand, because this is the demand that actually decides output (and employment)
- An increase (decrease) in autonomous spending causes aggregate output to increase (decrease) by a larger amount through the multiplier process
12 Full employment and involuntary unemployment
- Given the quantities of other factors, equilibrium output also determines the level of employment (think of a production function at the aggregate level)
- The output fixed by Y = AD is not necessarily the output at which everyone is employed
The full employment level of income is the level of income at which all the factors of production are fully employed in the production process. (CBSE supplement: when the entire labour force, all who are able and willing to work, is employed.)
Involuntary unemployment occurs when those who are able and willing to work at the going wage rate do not get work.
Involuntary unemployment
- Able and willing, yet no work
- Ready to work at the going wage
- Cause: deficiency of aggregate demand
- Absent at full employment
Voluntary unemployment
- Able to work but prefer not to
- Not ready to work at the going wage
- The person’s own choice
- Can exist even at full employment
- Equilibrium only means that, if left to itself, the level of income will not change, even when there is unemployment in the economy
- An equilibrium below full employment is an under-employment equilibrium; involuntary unemployment persists there
- Equilibrium output may be more or less than full employment output; this is where the problems of excess and deficient demand come from
13 Deficient demand and excess demand
13.1 Deficient demand and the deflationary gap
Deficient demand is the situation in which equilibrium output is less than full employment output because demand is not enough to employ all factors of production; that is, at full employment income aggregate demand falls short of aggregate supply.
The deflationary gap is the amount by which actual aggregate demand at full employment income falls short of the aggregate demand needed for full employment: deflationary gap = − (AD at ). It measures deficient demand.

On output
Equilibrium output below full employment; resources lie idle
On employment
Involuntary unemployment; under-employment equilibrium
On prices
Prices fall in the long run (hence “deflationary”)
13.2 Excess demand and the inflationary gap
Excess demand is the situation in which aggregate demand is more than the level of output produced at full employment; that is, the equilibrium level of output works out above the full employment level.
The inflationary gap is the amount by which actual aggregate demand at full employment income exceeds the aggregate demand needed for full employment: inflationary gap = (AD at ) − . It measures excess demand.

On output
All resources are already employed, so real output cannot rise further
On employment
Full employment already exists; employment does not rise
On prices
The extra demand only pushes prices up (demand-pull inflation); prices rise in the long run
Q. , = ₹140 crore, full employment income = ₹1,500 crore. (a) Find equilibrium income. (b) Identify the situation and measure the gap. (c) By how much must government spending rise to close the gap?
- (a) ₹1,200 crore (1)
- (b) Y (1,200) < (1,500), so deficient demand. AD at = 100 + 0.8 × 1,500 + 140 = 1,440; deflationary gap = 1,500 − 1,440 = ₹60 crore (1)
- (c) Income must rise by 300, k = 1 ÷ 0.2 = 5, so the required rise = 300 ÷ 5 = ₹60 crore (equal to the gap) (1). Check: (100 + 140 + 60) ÷ 0.2 = 1,500
- Through taxes: G − cT adds to the autonomous term, so a tax cut ΔT raises A by c × ΔT: 0.8 × ΔT = 60 ⇒ ΔT = ₹75 crore
- Interpretation: a shortfall of ₹60 crore in demand keeps ₹300 crore of output from being produced and leaves involuntary unemployment
Q. , = ₹300 crore, = ₹1,600 crore. Identify the situation and measure the gap.
- ₹2,000 crore > , so excess demand (1)
- AD at = 200 + 0.75 × 1,600 + 300 = 1,700; inflationary gap = 1,700 − 1,600 = ₹100 crore (1)
- Check: k = 4; (2,000 − 1,600) ÷ 4 = 100; if autonomous spending falls by 100, Y = 400 ÷ 0.25 = 1,600
- Interpretation: output cannot rise beyond full employment, so the extra ₹100 crore of demand will push up the price level
| Basis | Deficient demand | Excess demand |
|---|---|---|
| Meaning | At , AD < AS | At , AD > AS |
| Gap | Deflationary gap | Inflationary gap |
| Equilibrium | Below full employment (under-employment equilibrium) | Above full employment in money value |
| Output | Low, resources idle | Real output does not rise |
| Employment | Involuntary unemployment | Full employment |
| Price level | Falls in the long run | Rises (inflation) |
| Remedy | Raise AD | Reduce AD |
- Measuring the gap at equilibrium income is wrong; the gap is always measured at full employment income (), between AD and the 45° line
- Writing the deflationary gap as the income gap ( − Y) is wrong; the income gap = gap × multiplier
- “Employment rises under excess demand” is wrong; full employment already exists, only prices rise
14 Measures to correct excess and deficient demand
- Under deficient demand, aggregate demand must be raised by the deflationary gap; under excess demand it must be reduced by the inflationary gap
- There are two routes: fiscal policy (government spending and taxes) and monetary policy (money supply and credit, controlled by the central bank, the Reserve Bank of India)
| Measure | For deficient demand (raise AD) | For excess demand (reduce AD) | How it works |
|---|---|---|---|
| Government spending (G) | Increase (public works, roads, buildings) | Reduce | G is a direct component of AD; the multiplier enlarges its effect on income |
| Taxes (T) | Reduce | Increase | Disposable income Y − T changes, so consumption changes (c × ΔT) |
| Bank rate / repo rate | Reduce | Increase | Borrowing becomes cheaper/dearer for banks ⇒ interest rates and investment change |
| Cash reserve ratio (CRR), statutory liquidity ratio (SLR) | Reduce | Increase | Funds banks can lend change ⇒ credit creation and money supply change |
| Open market operations | Central bank buys government securities | Central bank sells securities | A purchase puts cash with banks (money supply rises), a sale takes it away |
| Margin requirement | Lower | Raise | Loans against securities rise/fall |
| Moral suasion | Persuade banks to lend more | Persuade banks to lend less | The central bank’s advice and pressure |
In a “measures” question, write each measure with its route: measure → effect on money supply/disposable income/interest rate → effect on C or I → effect on AD. Naming the measure alone does not make a full answer. The monetary instruments are explained in Chapter 3 (Money and Banking).
15 A question like Exercise 5: is the economy in equilibrium?
Q. Autonomous expenditure A = ₹50 crore, MPS = 0.2, income Y = ₹4,000 crore. Find ex ante aggregate demand and say whether the economy is in equilibrium.
- MPC = 1 − MPS = 1 − 0.2 = 0.8 (½)
- Formula: AD = A + cY (½)
- AD = 50 + 0.8 × 4,000 = ₹3,250 crore (1)
- AD (3,250) < Y (4,000): the economy is not in equilibrium; ₹750 crore of goods will be added to inventories unsold (1)
- Producers will cut output; equilibrium income = 50 ÷ 0.2 = ₹250 crore (1)
16 At a glance: formulas, definitions and revision
- Ex ante = planned, ex post = actual; income is determined by ex ante values
- Income is the main determinant of consumption; C = C̄ + cY, 0 ≤ c ≤ 1
- MPC + MPS = 1 and APC + APS = 1; APC = 1 at break-even
- Investment is taken as autonomous; it changes with the interest rate and the availability of credit
- Equilibrium: AD = Y (45° line) or S = I; Y* = (C̄ + Ī)/(1 − c)
- AD > Y ⇒ stocks fall, output rises; AD < Y ⇒ stocks pile up, output falls
- Multiplier k = 1/(1 − MPC) = 1/MPS, from 1 to infinity; book: I up by 10, income 250 to 300
- Paradox of thrift: MPC 0.8 to 0.5, income 250 to 100, saving stays 10
- A changes ⇒ AD shifts in parallel; c changes ⇒ AD swings
- Equilibrium need not be at full employment; under-employment equilibrium has involuntary unemployment
- Deficient demand ⇒ deflationary gap ⇒ raise G, cut taxes, raise money supply
- Excess demand ⇒ inflationary gap ⇒ cut G, raise taxes, reduce money supply
- Can I prove MPC + MPS = 1 and APC + APS = 1?
- Can I draw the 45° line equilibrium diagram from memory, with point E and both axes named?
- Can I write the multiplier rounds (10, 8, 6.4, …) in a table and reach 50?
- Can I show that saving is 10 both times in the paradox of thrift?
- Can I mark the deflationary and inflationary gaps in the right place (at )?
- Can I write each measure with its route to AD?