21 multiple-choice (MCQ / objective) questions from this chapter, in the common exam-style shapes. Every question comes with an explanation along with the answer, so you remember why the option is correct, not just which one it is.
1 Direct Questions
Direct Questions
- 1 markSound is produced whenever an object:
(A) is heated strongly(B) reflects light(C) is placed in a vacuum(D) vibrates - 1 markIn human beings, sound is produced mainly by the vibration of the:
(A) lungs(B) diaphragm(C) trachea(D) vocal cords in the larynx - 1 markGrasshoppers and crickets, which have no vocal cords, produce their characteristic sound by:
(A) rubbing their wings or legs together(B) vibrating their antennae(C) beating their wings rapidly against the air(D) striking their legs on the ground - 1 markWhen the vibrating prong of a struck tuning fork is touched to the surface of water, ripples are seen spreading out. This observation shows that the:
(A) prongs of the tuning fork are indeed vibrating(B) tuning fork has stopped vibrating(C) water is conducting electricity(D) frequency of the tuning fork has changed - 1 markA region of space that contains no matter at all is called a:
(A) compression(B) vacuum(C) rarefaction(D) medium - 1 markIn the classic bell-jar experiment, as air is steadily pumped out of a jar containing a ringing electric bell, the sound heard:
(A) grows fainter and fainter, becoming almost inaudible(B) grows louder and louder(C) does not change at all(D) changes into a much higher pitch - 1 markIn a sound wave passing through air, a region where the air particles are packed closer together than normal, giving a higher-than-average density, is called a:
(A) trough(B) node(C) compression(D) rarefaction - 1 markThe SI unit in which the frequency of a sound wave is measured is the:
(A) metre(B) second(C) newton(D) hertz - 1 markThe loudness of a sound, as perceived by a listener, is chiefly decided by the wave’s:
(A) frequency(B) wavelength(C) amplitude(D) speed
2 Assertion-Reason
Assertion-Reason
- 1 markAssertion (A): The speed of sound in steel is much greater than the speed of sound in air.
Reason (R): Steel is a shiny grey metal that is commonly used to make cutlery and machine parts.
(A) A and R are both true, and R correctly explains A(B) A and R are both true, but R does not explain A(C) A is true, but R is false(D) A is false, but R is true
3 Match the Following
Match the Following
- 1 markMatch List I with List II.
List I: (i) Human voice (ii) Tuning fork (iii) Grasshopper (iv) Loudspeaker
List II: (p) Vibrating cone driven by an electrical signal (q) Vibration of stretched vocal cords (r) Two vibrating metal prongs (s) Rubbing wings or legs together
(A) i-q, ii-r, iii-s, iv-p(B) i-r, ii-q, iii-p, iv-s(C) i-p, ii-s, iii-r, iv-q(D) i-s, ii-p, iii-q, iv-r - 1 markMatch List I with List II (take the speed of sound in air as 340 m/s).
List I: (i) Minimum time gap needed to hear a distinct echo (ii) Reflections that cause reverberation (iii) Minimum distance of a reflecting surface for a clear echo (iv) Distance of a wall when an echo is heard 0.5 s after a clap
List II: (p) 85 m (q) at least 0.1 s (r) 17 m (s) arriving less than 0.05 s apart
(A) i-q, ii-s, iii-p, iv-r(B) i-s, ii-q, iii-r, iv-p(C) i-q, ii-s, iii-r, iv-p(D) i-r, ii-p, iii-q, iv-s
4 Statement-Based Questions
Statement-Based Questions
- 1 markStatement I: Sound cannot travel through a vacuum.
Statement II: Sound is a mechanical wave that requires a material medium to propagate.
(A) Both statements are true, and Statement II explains Statement I(B) Both statements are true, but Statement II does not explain Statement I(C) Statement I is true, Statement II is false(D) Statement I is false, Statement II is true - 1 markStatement I: A tuning fork produces a single, pure musical tone.
Statement II: A musical note produced by an instrument is a mix of a fundamental frequency and its overtones.
(A) Both statements are true, and Statement II explains Statement I(B) Both statements are true, but Statement II does not explain Statement I(C) Statement I is true, Statement II is false(D) Statement I is false, Statement II is true
5 Arrange in the Correct Order
Arrange in the Correct Order
- 1 markArrange the following in increasing order of the speed of sound through them.
1. Air
2. Water
3. Steel
(A) 1-2-3(B) 3-2-1(C) 2-1-3(D) 2-3-1 - 1 markArrange the following in increasing order of frequency.
1. A typical infrasonic wave used to detect earthquakes
2. A wave at the upper edge of human hearing
3. A typical ultrasonic wave used in SONAR
(A) 2-1-3(B) 1-3-2(C) 1-2-3(D) 3-2-1
6 Fill in the Blanks
Fill in the Blanks
- 1 markThe material through which sound travels is called the ______ of the sound.
(A) medium(B) source(C) vacuum(D) wavelength - 1 markThe persistence of sound in a hall, caused by multiple reflections off its walls, when successive reflections arrive less than 0.05 s apart, is called ______.
(A) an echo(B) reverberation(C) resonance(D) refraction
7 Odd One Out
Odd One Out
- 1 markThree of these are examples of longitudinal waves. Which one is NOT?
(A) sound in air(B) light in vacuum(C) sound in water(D) sound in a steel rail
8 Passage-Based Questions
Passage-Based Questions
Passage
A physics teacher demonstrates the vacuum bell jar experiment: an electric bell is suspended inside a glass jar and set ringing, and the sound is clearly heard. As a vacuum pump slowly removes the air from the jar, the ringing grows fainter and fainter, until it is almost inaudible near a vacuum, even though the bell can still be seen ringing through the glass. When air is let back into the jar, the sound returns to its original loudness.
- 1 markWhat does this experiment prove about sound?
(A) Sound needs a material medium to travel(B) Sound travels faster in a vacuum(C) Sound is a transverse wave(D) Sound cannot be produced mechanically
9 True / False
True / False
- 1 markConsider the following statements.
(i) The frequency of a sound wave changes when it passes from air into water.
(ii) The speed of a sound wave changes when it passes from air into water.
(A) Both are true(B) Only (i) is true(C) Only (ii) is true(D) Both are false
Answer Key and Explanations
Direct Questions
- (D) Every sound traces back to something vibrating; the vibrating object is called the source of the sound.
- (D) Tightly stretched muscular flaps called the vocal cords, inside the larynx (voice box), vibrate to produce sound, which the mouth and nasal cavity then shape into speech.
- (A) Unlike humans and some other animals that use vocal cords, grasshoppers and crickets make sound by rubbing their wings or legs together.
- (A) When the vibrating prong touches the water, waves form on the surface, indicating that the prongs of the tuning fork are indeed vibrating. This supports the idea that sound is produced by vibrating objects.
- (B) A vacuum is, by definition, a space with no matter in it at all, and sound cannot travel through it.
- (A) As air, the medium carrying the sound, is removed, the ringing becomes fainter and fainter, nearly inaudible near a vacuum, even though the bell can still be seen ringing.
- (C) A compression is exactly this: a region of higher-than-average density, as opposed to a rarefaction, which has lower-than-average density.
- (D) Frequency, the number of density oscillations per unit time at a fixed point, is measured in hertz (Hz), which is the same as per second (s⁻¹).
- (C) A larger amplitude carries more energy and is perceived as greater loudness; frequency, by contrast, is perceived as pitch.
Assertion-Reason
- (B) Both statements are true on their own, but R (a fact about steel’s appearance and uses) is unrelated to why sound is faster in steel, so R does not explain A. The book’s Table 10.1 gives about 5000 m/s in steel and 340 m/s in air.
Match the Following
- (A) The human voice comes from vibrating vocal cords, a tuning fork has two vibrating prongs, a grasshopper rubs its wings or legs together, and a loudspeaker vibrates a cone driven by an electrical signal.
- (C) An echo needs a gap of at least 0.1 s (q); reverberation comes from reflections arriving less than 0.05 s apart (s); the minimum echo distance is 340 × 0.1 ÷ 2 = 17 m (r); an echo after 0.5 s means the wall is 340 × 0.5 ÷ 2 = 85 m away (p).
Statement-Based Questions
- (A) Statement I is true, and Statement II gives exactly the reason for it: because sound is mechanical and needs a medium, it simply cannot cross a vacuum.
- (B) Both statements are true on their own: a tuning fork does give a single-frequency tone, and a note is indeed a mixture of a fundamental and overtones, but Statement II is simply a separate fact about notes and does not explain why a tuning fork gives a pure tone.
Arrange in the Correct Order
- (A) Sound travels slowest in air (340 m/s), faster in water (1500 m/s) and fastest in steel (5000 m/s), so the increasing order is air, water, steel: 1-2-3.
- (C) Infrasonic waves are below 20 Hz, which is lower than 20,000 Hz (the upper edge of human hearing), which is lower than any ultrasonic frequency (above 20 kHz), giving the increasing order 1-2-3.
Fill in the Blanks
- (A) The material through which a sound wave travels, whether solid, liquid or gas, is called its medium.
- (B) This persistence of sound from multiple reflections arriving less than 0.05 s apart is called reverberation, unwanted reverberation is reduced in auditoriums with absorbent materials.
Odd One Out
- (B) Light is a transverse wave that needs no medium; sound in air, water and a steel rail are all longitudinal mechanical waves.
Passage-Based Questions
- (A) As the medium (air) is removed, the sound fades away almost completely, proving that sound needs a material medium to travel.
True / False
- (C) Statement (i) is false: frequency is fixed by the source and does not change with the medium. Statement (ii) is true: speed depends on the medium, so it changes, and hence so does the wavelength.
More for this chapter