All the questions NCERT Exploration, Class 9, Chapter 10, “Sound Waves: Characteristics and Applications” asks inside the chapter (Think It Over, the activities, the What if boxes and all thirteen Pause and Ponder questions), then all 15 questions from the “Revise, Reflect, Refine” section exactly as printed in the book, with a model answer under each, and finally The Journey Beyond, as project pointers rather than full answers. Write your own answer first, then compare.
1 Think It Over
Q. (a) Two astronauts are repairing the arm of a space station together during a spacewalk. Can they talk to each other and hear the sounds of metal clanking as they do on the Earth? (b) How do most bats use sound to locate their prey in the dark at night?
Answer: (a) No. Outer space is a near vacuum, and sound needs a material medium to travel, so they cannot hear each other speak or hear metal clanking directly. They communicate through special devices fitted in their spacesuits.
(b) Most bats emit short bursts of ultrasonic waves, which are reflected from nearby objects and prey. By sensing these echoes the bat works out the position of obstacles and prey. This is called echolocation.
2 Activity 10.1: A Rubber Band on a Box
Q. Pluck the rubber band stretched across the open box. Do you hear any sound? Is it vibrating? Once it stops vibrating, do you still hear the sound? Change the tension and pluck it each time: does the sound change? What changes do you notice? Stretch it between two fingers and pluck it near your ear: is the sound still produced? Is it as loud as before?
Answer: Yes, a sound is heard, and the band is seen to be vibrating. When the vibration stops, the sound also stops. When the band is stretched more tightly the sound becomes higher (shriller); when it is loosened the sound becomes lower. Without the box, the stretched band still produces sound, but it is much softer, because the box’s air and walls also vibrate and make the sound louder. So sound is produced by vibrations.
3 Activity 10.2: The Tuning Fork
Q. Strike a prong of the tuning fork gently on the rubber pad and bring it close to your ear. Do you hear a sound? Touch a water surface with a vibrating prong: do you see waves forming? Bring the prongs near your ear in different orientations: do you hear the sound?
Answer: Yes, a sound is heard. When a vibrating prong touches water, small waves form on the surface, indicating that the prongs are indeed vibrating. The sound is heard in every orientation, showing that sound spreads in many directions from the source.
4 Pause and Ponder 1 and 2: Producing Sound
Q. 1. Explore various ways of producing sound. 2. Make a list of different types of musical instruments and identify their vibrating parts which produce sound.
Answer: 1. By plucking a stretched string or rubber band, striking a metal plate, bell or tuning fork, beating a stretched membrane (drum), blowing air into a pipe or across a bottle mouth, rubbing two surfaces together, and using our vocal cords while speaking or singing.
2. Sitar, veena, guitar, tanpura: vibrating strings. Tabla, mridangam, dholak: vibrating stretched membrane. Bansuri (flute), shehnai, harmonium: vibrating air column (with a reed in shehnai and harmonium). Taal, cymbals, bells, ghatam: the vibrating metal or clay body itself.
5 Activities 10.3 and 10.4: Sound Through Solids and Liquids
Q. Activity 10.3: With your ear against the desk, are you able to hear the knock or scratch through the table? Activity 10.4: Tap two metal spoons together while they are submerged in water. Do you again hear the sound produced? If sound did not travel through liquids, would you have heard this sound?
Answer: Yes, the knock is heard through the desk, often more clearly than through the air, so sound travels through solids. Yes, the tapping of the submerged spoons is heard; the sound reaches us after travelling through water and then air. If sound could not travel through liquids, it would not have been heard. So sound travels through solids, liquids and gases.
6 Pause and Ponder 3: Assertion and Reason
Q. Assertion (A): We cannot hear the sound of a bell ringing in a closed jar after most of the air is pumped out. Reason (R): Sound requires a medium to travel. (i) Both A and R are true, but R is not the correct explanation of A. (ii) Both A and R are true, and R is the correct explanation of A. (iii) A is true, but R is false. (iv) A is false, but R is true.
Answer: (ii). Both are true, and R explains A: with most of the air removed, there is almost no medium left to carry the sound from the bell to our ears.
7 Activity 10.5: A Slinky Model of Sound
Q. Give the slinky a sharp push and pull. Do you observe a disturbance which moves towards your friend? Push and pull many times quickly: are a series of disturbances produced? Do they move across the length of the slinky? Does the mark on the slinky move back and forth parallel to the direction of the disturbance?
Answer: Yes, a disturbance (a region where the turns are closer together, followed by one where they are spread out) moves along the slinky to the friend. Repeated pushes and pulls produce a series of such disturbances, and they travel along the whole length. The marked turn only moves back and forth about its own position, parallel to the direction of the disturbance; it does not travel along. This is how compressions and rarefactions move through air while the particles only oscillate.
8 Pause and Ponder 4: Assertion and Reason
Q. Assertion (A): Compressions and rarefactions move through the medium. Reason (R): Individual particles of the medium continuously move forward with the wave. (i) Both A and R are true, but R is not the correct explanation of A. (ii) Both A and R are true, and R is the correct explanation of A. (iii) A is true, but R is false. (iv) A is false, but R is true.
Answer: (iii). A is true: the compressions and rarefactions travel through the medium. R is false: the particles only oscillate about their mean positions; they do not travel with the wave.
9 Activity 10.6: Grains on a Stretched Sheet
Q. Produce a loud sound near the covered container without touching it. Does the sound have any effect on the grains? Do you observe the grains over the sheet move or jump? Why does this happen, even though the source of sound is not touching the sheet or the container?
Answer: Yes, the grains move and jump, and they jump higher for louder sounds. The sound travels through the air, reaches the sheet and makes it vibrate, and the vibrating sheet makes the grains move. This shows that sound is a form of energy that is carried through the medium.
10 Pause and Ponder 5: What Reaches Your Ear?
Q. When sound travels from a tuning fork to your ear, which of the following actually reaches your ear? (i) Air particles near the tuning fork (ii) Energy carried by sound waves (iii) The tuning fork material (iv) A continuous stream of compressed air
Answer: (ii) Energy carried by sound waves. The air particles near the fork only vibrate about their own positions; it is the energy of the disturbance that is passed on from particle to particle to your ear.
11 Pause and Ponder 6: Drawing Density Graphs
Q. The variation of density of the medium for two sound waves is shown in Fig. 10.17 (a) and (b). Label compression and rarefaction by C and R on it. In the graph given in Fig. 10.17 (c) and (d), label the axes and draw the curves corresponding to Fig. 10.17 (a) and (b).
Answer: Mark C at the centre of each crowded (dense) band of dots and R at the centre of each sparse band between them. On graphs (c) and (d), label the vertical axis “Density” and the horizontal axis “Distance”, with the dashed line as the average density. Draw a smooth wave that rises to a crest exactly below each C and falls to a trough exactly below each R, crossing the average-density line midway between them. The wave whose C bands are closer together is drawn with crests closer together (shorter wavelength).
12 Activity 10.7: Frequencies of Musical Notes
Q. Sing or play the notes Sa, Re, Ga, Ma, Pa, Dha, Ni, Sa and record the approximate frequency of each with a frequency app. Compare the notes by taking the ratio of each frequency with respect to ‘Sa’. Do you observe any pattern?
Answer: The frequency is lowest for Sa and increases step by step for Re, Ga, Ma, Pa, Dha and Ni. Each ratio to Sa is greater than 1 and grows from Re to Ni, and the ratios of each note to Sa should come out roughly the same for different singers, even though their Sa frequencies differ; check this in the class activity and note any differences. The upper Sa comes out about twice the frequency of the lower Sa, which is an octave. Each note has its own distinct frequency.
13 Pause and Ponder 7, 8 and 9: Frequency and Wavelength
Q. 7. Conduct Activity 10.1 once again with a thick rubber band and then with a thin rubber band. Does the thin rubber band vibrate faster than the thick rubber band? If yes, how do the frequency and time period of the sound produced by the thin rubber band differ from that of the thick rubber band? 8. If the frequency of a sound wave produced by an oscillating piston of a long tube filled with air is 20 Hz, then how many oscillations does the piston complete per minute? 9. For the sound wave represented by the graph shown in Fig. 10.19, what is half of its wavelength?
Answer: 7. Yes, the thin band vibrates faster. So its sound has a higher frequency and, since ν = 1/T, a shorter time period than the sound of the thick band.
8. 20 oscillations per second × 60 s = 1200 oscillations per minute.
9. Read Fig. 10.19 against its marked distances (0, 1.5, 3.0 and 4.5 cm): the pattern of the curve repeats every 3.0 cm, that is, from one crest to the next crest (or one trough to the next trough) is 3.0 cm. So the wavelength is 3.0 cm and half the wavelength is 1.5 cm.
14 What If the Speed of Sound Depended on Frequency?
Q. What if the speed of sound in air depended on its frequency? Would music still sound pleasant when a singer performs with instruments? Why or why not?
Answer: No. Music contains many frequencies at once (fundamentals and overtones from the voice and every instrument). If each frequency travelled at a different speed, the high and low notes produced together would reach a listener at different times, and a listener farther away would hear them more out of step. Chords and rhythm would get jumbled, so the performance would not sound pleasant, especially from a distance.
15 Pause and Ponder 10 and 11: Speed in Different Media
Q. 10. Using Table 10.1 (steel 5000 m/s, water 1500 m/s, air 340 m/s), compare the speeds by finding the ratio of (i) the speed of sound in water with respect to the speed in the air, (ii) the speed of sound in steel with respect to the speed in the water. 11. Two friends are standing along a steel fence at a distance of 340 m from each other. Gunjan places her ear over the fence and her friend knocks the fence with a metal object. Calculate the time difference between the sound that reached Gunjan through the air and the steel. Would it have been possible for her to distinguish between the two sounds? (The time interval between two sounds must be at least 0.1 s to be heard separately.)
Answer: 10. (i) 1500 ÷ 340 ≈ 4.4 (sound is about 4.4 times faster in water). (ii) 5000 ÷ 1500 ≈ 3.3.
11. Time through air = 340 ÷ 340 = 1 s. Time through steel = 340 ÷ 5000 = 0.068 s. Time difference = 1 – 0.068 = 0.932 s, about 0.93 s. Since this is much more than 0.1 s, Gunjan hears the two sounds separately: first through the steel, then through the air.
16 Activity 10.8: Changing the Frequency
Q. Play a sound of 100 Hz on a frequency app and increase the frequency in steps of 100 Hz up to 1000 Hz; describe how the sound changes. Then reduce the frequency from 50 Hz till about 20 Hz or the point where you cannot hear the sound anymore.
Answer: As the frequency rises from 100 Hz to 1000 Hz, the sound becomes higher and shriller (its pitch rises). As it is lowered from 50 Hz towards 20 Hz, the sound becomes a deep hum and finally cannot be heard at all, because frequencies below about 20 Hz (infrasonic) are outside the human audible range. The exact lowest frequency heard varies from person to person.
17 Pause and Ponder 12: Minimum Distance for an Echo
Q. An experiment is being set up that requires echoes to arrive at least 0.2 s after the emission of sound. What minimum distance should a reflecting surface be placed at? Assume the speed of sound to be 343 m s-1.
Answer: In 0.2 s sound travels 343 × 0.2 = 68.6 m, which is the distance to the surface and back. Minimum distance = 68.6 ÷ 2 = 34.3 m.
18 What If Humans Could Detect Ultrasonic Waves?
Q. What if humans could detect ultrasonic waves like dogs can? What would be the advantages and disadvantages?
Answer: Advantages: we could hear bats, many insects and some machine faults, might sense obstacles in the dark by echoes, and could hear ultrasonic signals used in equipment. Disadvantages: the world would be much noisier, because ultrasonic devices (cleaners, sensors, pest repellers, ultrasonography machines) would be heard all the time; it could disturb sleep and concentration, and loud ultrasonic sources could be uncomfortable or harmful to our hearing.
19 Pause and Ponder 13: Depth of the Ocean
Q. Sound travels much farther in water than light, and thus, is used for various underwater applications. A sonar signal sent to find the depth of ocean takes 4 s to return. What is the depth of the ocean at that location if the speed of sound in seawater is 1500 m s-1?
Answer: One-way time = 4 ÷ 2 = 2 s. Depth = 1500 × 2 = 3000 m.
20 Which observation shows sound is mechanical
Q. Which observation best supports the idea that sound is a mechanical wave?
(i) Sound shows reflection
(ii) Sound needs a medium to propagate
(iii) Sound has frequency
(iv) Sound carries energy
Answer: (ii) Sound needs a medium to propagate. A mechanical wave is defined as a wave that needs a material medium to travel and cannot exist in a vacuum. Reflection, frequency and carrying energy are properties shared by many kinds of waves, including electromagnetic waves like light, which need no medium at all. Only the requirement of a medium is a genuine test of whether a wave is mechanical, and sound fails to travel through a vacuum, which is exactly why option (ii) is the correct choice.
21 What increasing frequency does and does not change
Q. For a sound wave propagating in a medium, increasing its frequency will increase its
(i) wavelength
(ii) speed
(iii) number of compressions per second
(iv) time period
Answer: (iii) the number of compressions per second. This is what frequency means: the number of density oscillations (compressions) passing a fixed point every second. The speed of sound in a given medium depends only on the medium itself, not on frequency, so it stays fixed. Since v = λν and v is fixed, a higher frequency ν must mean a shorter wavelength λ, not a longer one, so (i) is wrong. Since the time period T = 1/ν, a higher frequency means a shorter time period, not a longer one, so (iv) is wrong too.
22 Frequency from a compression count
Q. If 20 compressions pass a point in 4 seconds, the frequency is
(i) 80 Hz
(ii) 5 Hz
(iii) 10 Hz
(iv) 0.2 Hz
Answer: (ii) 5 Hz. Frequency is the number of oscillations per unit time, so ν = 20 / 4 = 5 Hz.
23 Echo or reverberation at 0.05 s
Q. In a room, the reflected sound reaches the ear 0.05 s after its production. Will it produce an echo or reverberation? Justify your answer.
Answer: It will not produce an echo. To hear a reflected sound as a separate echo, at least 0.1 s must pass between the original sound and the reflection, and 0.05 s is less than that, so the reflection merges with the original sound. The book describes reverberation as reflections arriving with a time difference less than 0.05 s; 0.05 s sits right at that limit, so the reflection adds to the persistence of the sound in the room (reverberation) rather than being heard as a distinct echo. Answer: reverberation, not an echo.
24 Comparing two density-distance graphs
Q. Graphs representing two sound waves are given in Fig. 10.30. If the scales on the X and Y axes of the two graphs are the same, which of the two sound waves has (i) greater wavelength, and (ii) smaller amplitude?
Answer: Graph (a) shows about 3 complete waves and graph (b) shows about 6 complete waves over the same length of the distance axis, so each wave in graph (a) is stretched over a longer distance: (i) graph (a) has the greater wavelength. Comparing the height of the crests and the depth of the troughs above and below the mean line on the same density scale, graph (a)’s crests and troughs stay closer to the mean line than graph (b)’s do, so (ii) graph (a) also has the smaller amplitude (graph (b) has the larger amplitude).
25 Identifying three curves by frequency
Q. The sound waves emitted by three sources A, B and C are represented in Fig. 10.31. If the frequency of A is maximum and C is minimum, identify the corresponding curves, and mark A, B and C on them.
Answer: Frequency is the number of complete waves fitted into the same length of the distance axis, so the curve packing in the most waves has the highest frequency and the curve packing in the fewest waves has the lowest frequency. Counting the complete waves over the same length of the distance axis in Fig. 10.31: the green curve (the one with the largest amplitude) completes 4 full waves, the red curve completes 3 full waves, and the blue curve (the flattest one) completes only 2 full waves. So the green curve has the highest frequency and is A; the red curve has the middle frequency and is B; and the blue curve has the lowest frequency and is C. Mark A on the green curve, B on the red curve and C on the blue curve.
26 Drawing a wave of given amplitude and wavelength
Q. Draw a graph to represent a sound wave for which the density amplitude is 3 units and wavelength is 4 cm.
Answer: On a graph of density (Y-axis) against distance in cm (X-axis), draw a smooth curve starting at the average density at distance 0. It should rise to a crest exactly 3 units above the average density at 1 cm, return to the average density at 2 cm, fall to a trough exactly 3 units below the average density at 3 cm, and return to the average density at 4 cm, completing one full wave. This same shape then repeats every 4 cm, since 4 cm is the wavelength, and the curve never rises above +3 units or falls below −3 units from the average, since 3 units is the amplitude.
27 Errors in a movie’s space explosion
Q. In a movie, while showing the explosion of a spacecraft in space, a flash of light is shown along with sound at the same time. What are the errors in this depiction?
Answer: The main error is that there should be no sound heard at all. Space is a near vacuum, with no material medium, and since sound is a mechanical wave that needs a medium to travel, an explosion in space would produce no sound that could reach a distant observer or spacecraft. A second, smaller error is the idea of light and sound arriving “at the same time”: even in a medium like air, where both could in principle be produced together, light travels enormously faster than sound and would be seen well before any sound was heard, exactly as thunder is heard well after the lightning that causes it is seen.
28 Time period from wavelength and speed
Q. A source produces a sound wave of wavelength 3.44 m. If the wave travels with a speed of 344 m s−1 find its time period.
Answer: Frequency ν = v / λ = 344 / 3.44 = 100 Hz.
Time period T = 1 / ν = 1 / 100 = 0.01 s.
29 Depth of a sunken ship from a SONAR echo
Q. A ship searching for a sunken ship sent a sonar signal and detected an echo after 5 s. If ultrasonic wave travels at 1525 m s−1 in seawater, approximately how far down in the ocean is the wreckage of the sunken ship located?
Answer: The 5 s is the round-trip time (down to the wreck and back), so the one-way time is 5 / 2 = 2.5 s.
Depth = speed × time = 1525 × 2.5 = 3812.5 m.
30 Time for a parking sensor’s ultrasonic pulse
Q. A vehicle is fitted with an ultrasonic distance sensor as part of a parking assistance system which provides echolocation, while the driver is reversing the vehicle. It emits ultrasonic wave (about 40 kHz) which is reflected by the obstacle. When the warning beep starts sounding at a distance of 1.2 m from the obstacle, how much time is taken by the ultrasonic wave to travel to the obstacle and come back? Assume the speed of ultrasonic wave in air to be 345 m s−1.
Answer: The wave must travel to the obstacle and back, a total distance of 2 × 1.2 = 2.4 m.
Time = distance / speed = 2.4 / 345 = 0.00696 s, that is, about 6.96 × 10−3 s (roughly 7 milliseconds).
31 Extra time for thunder as air cools
Q. The speed of sound in air is about 331 m s−1 at 0 °C and nearly 344 m s−1 at 22 °C. Roughly how much extra time will the sound of thunder take to travel a distance of 1720 m, if the air temperature changes from 22 °C to 0 °C? Assume that all other conditions remain unchanged.
Answer: Time at 22 °C = 1720 / 344 = 5 s.
Time at 0 °C = 1720 / 331 = 5.196 s (approximately).
Extra time needed = 5.196 − 5 = about 0.196 s, roughly 0.2 s more, since sound travels a little slower in colder air.
32 Wavelength and frequency from a density diagram
Q. The variation of density of medium for a sound wave propagating with a speed of 340 m s−1 is shown in Fig. 10.32. Calculate the wavelength and frequency of the sound wave.
Answer: In Fig. 10.32, the marked 8 cm span covers exactly two complete compression-to-compression cycles (three dense bands of dots with two lighter, spread-out bands between them), so one full wavelength is half of that span.
Wavelength λ = 8 / 2 = 4 cm = 0.04 m.
Frequency ν = v / λ = 340 / 0.04 = 8500 Hz.
33 Wavelengths and frequencies of two graphed waves
Q. The graphical representation of two sound waves A and B propagating at the same speed of 345 m s−1 is shown in Fig. 10.33. What is the wavelength of each of them? Also, calculate their frequencies.
Answer: Reading off Fig. 10.33 against the marked 2.5 cm and 5.0 cm distance points, wave A completes one full cycle every 2.5 cm, and wave B, whose crest-to-crest spacing is exactly double A’s, completes one full cycle every 5.0 cm.
Wave A: λA = 2.5 cm = 0.025 m, so νA = 345 / 0.025 = 13,800 Hz.
Wave B: λB = 5.0 cm = 0.05 m, so νB = 345 / 0.05 = 6900 Hz.
34 Ratio of speeds in air and water
Q. Two identical sound sources are placed at A and B, one in air and one submerged in water (Fig. 10.34). Both produce sounds at the same time, which travel horizontally to the vertical side of the cliff and come back. If the time taken by the sound to return to A is 4.5 times that of B, what is the ratio between the speeds of sound in air and water?
Answer: Both sounds travel the same distance, out to the cliff face and back, so time and speed are inversely related here: a longer time for the same distance means a slower speed.
Since tA = 4.5 × tB, and distance is the same for both, vA / vB = tB / tA = 1 / 4.5 = 2 / 9.
So the speed of sound in air, to the speed of sound in water, is in the ratio 2 : 9 (sound in water travels 4.5 times faster than in air), which agrees well with the chapter’s own figures of about 340 m/s in air against about 1500 m/s in water.
35 The Journey Beyond
Q. Find out about research on excessive earphone use, how hearing is tested, the decibel ranges for mild, moderate and severe hearing loss, and government schemes for hearing aids and cochlear implants; compare the loudness of a phone with and without a paper cone; find out how curved ceilings and walls improve sound in halls; measure the speed of sound in a large ground by bursting a balloon and timing the sound (why did you measure the time between ‘seeing’ and ‘hearing’ the balloon burst?); explore the effect of humidity and temperature on the speed of sound.
Answer: These are projects, so only pointers are given here. Hearing loss can be tested using audiograms; prolonged exposure to loud sound can lead to hearing loss. The book does not print the decibel ranges for mild, moderate and severe hearing loss: when you find them, name the standard you used (for example, the WHO grades). Check the current government schemes for hearing aids and cochlear implants before writing your article. With a paper cone over the phone, expect the sound to be louder in front of the cone, since the cone may direct the sound forward; check this by comparing the loudness and recording your results. For curved ceilings and walls, find out from an architect or by searching how curved surfaces can reflect sound towards the audience. In the balloon experiment we time from seeing to hearing because light reaches us almost instantly, so the measured time is practically the time taken by sound to cover the distance; speed = distance ÷ average time, which should come out close to 340 m/s. Speed of sound in air increases with temperature and humidity (in dry air, about 331 m/s at 0 °C and nearly 344 m/s at 22 °C).