The essence of this chapter for last-minute revision: definitions, formulas, key facts and tables. The full notes, with the whole explanation and solved examples, are available separately.
1 The chapter in one line each
Work, Energy, and Simple Machines
1 · WorkForce times displacement, only along the force’s own direction
2 · Work-energy theoremWork done on an object equals the change in its energy
3 · Kinetic and potential energyEnergy of motion, and energy of position or deformation
4 · Conservation of mechanical energyKE + PE stays constant if no force other than gravity does work
5 · PowerHow quickly work is done, in watts
6 · Simple machinesPulleys, ramps and levers trade force for distance
2 Work: the basics
- Work done by a constant force: W = F × s, counting only the part of the displacement along the force’s own direction
- SI unit: the joule (J); 1 J = 1 N × 1 m = 1 kg m² s⁻²
- Work is zero when there is no force, no displacement, or the force is perpendicular to the displacement (e.g. carrying a bag while walking, pushing an immovable wall)
- Positive work: force and displacement point the same way, and the object gains energy (e.g. lifting a bucket)
- Negative work: force and displacement point opposite ways, and the object loses energy (e.g. a goalkeeper’s hand moving back while stopping a ball, air resistance on a rising object)
3 Definitions in one place
All definitions in one place
Work doneBy a constant force F on an object displaced a distance s in the direction of the force, W = F × s
Work-energy theoremThe work done on an object, or a system of objects, equals the change in its energy
Kinetic energyThe energy an object possesses because it is moving; an object at rest has zero kinetic energy
Potential energyEnergy stored by an object due to its deformation, or by a system of objects due to their relative positions
Gravitational potential energyThe stored energy of an object near the much more massive Earth, U = mgh
Mechanical energyThe sum of an object’s kinetic and potential energy, KE + PE
Conservation of mechanical energyMechanical energy stays constant if no force other than gravity does work on the object
PowerThe rate at which work is done, P = W/t; SI unit the watt (W), 1 W = 1 J/s
Mechanical advantageThe ratio of load to effort for a machine, mechanical advantage = load / effort
4 Formula sheet
| Quantity | Formula | Notes |
|---|---|---|
| Work | W = F × s | F in newtons, s in metres, W in joules |
| Kinetic energy | K = ½mv² | m in kg, v in m/s, K in joules; no direction |
| Gravitational PE | U = mgh | h measured from a chosen reference level; valid near the Earth’s surface |
| Mechanical energy | ME = K + U | Constant if no force other than gravity does work |
| Power | P = W/t | 1 W = 1 J/s; 1 hp = 746 W |
| Mechanical advantage | load ÷ effort | No unit; a ratio of two forces |
| Inclined plane | effort × L = mg × h | MA = L/h, always > 1 on a real ramp |
| Lever | F₁ × d₁ = F₂ × d₂ | MA = effort arm ÷ load arm |
5 Simple machines at a glance
| Machine | What it changes | Mechanical advantage |
|---|---|---|
| Fixed pulley | Direction of the effort only | Always exactly 1 |
| Movable pulley / pulley system | Direction and magnitude of the effort | Can be greater than 1 |
| Inclined plane | Trades a longer path for a smaller force | L / h, always > 1 |
| Lever | Trades effort distance for load force, or the reverse | Effort arm ÷ load arm; can be >, <, or = 1 |
6 The three classes of levers
| Class | Arrangement | Mechanical advantage | Examples |
|---|---|---|---|
| Class I | Fulcrum between load and effort | Can be >, <, or = 1 | Seesaw, scissors, pliers, crowbar |
| Class II | Load between fulcrum and effort | Always > 1 | Wheelbarrow, bottle opener, nutcracker |
| Class III | Effort between fulcrum and load | Always < 1 | Tweezers, fishing rod, a broom, the human forearm |
7 Numbers worth remembering
746 W1 horsepower (1 hp = 746 W); the watt itself is named after James Watt
1 J= 1 N × 1 m, the work done raising 1 N through 1 m
4×kinetic energy increases by this factor when speed doubles (K ∝ v²)
- The joule is named after James Prescott Joule, who studied how mechanical and thermal energy convert into each other
- The watt is named after James Watt, who built an efficient steam engine
- Energy also moves as heat, light (radiation), sound, through electric circuits, and in nuclear reactions, not only as mechanical work
- Forms of energy (Fig. 7.10): mechanical (due to motion or position of objects); thermal (makes things warm or hot); light (allows us to see); sound (energy of vibrations of air or other molecules); chemical (stored in fuels and food as chemical bonds between atoms); electrical (related to position or motion of charges); nuclear (stored in the nuclei of atoms)
- A traditional watermill (gharat/panchakki) converts a stream’s potential energy into kinetic energy to turn a grinding stone, the same principle used by modern hydroelectric dams
Quick Revision: read this the night before the exam
- Work W = F × s, counting only displacement along the force’s own direction; zero if F = 0, s = 0, or F ⊥ s
- The work-energy theorem: work done on an object equals the change in its energy
- Kinetic energy K = ½mv²; potential energy (gravitational) U = mgh
- Mechanical energy ME = K + U stays constant if no force other than gravity does work
- Power P = W/t, measured in watts; 1 hp = 746 W
- Mechanical advantage = load ÷ effort; a machine changes force, but never reduces the total work needed
- A fixed pulley only changes direction (MA = 1); a longer incline or effort arm needs less effort
- Levers fall into three classes, based on where the fulcrum, load and effort sit relative to each other
- Work done against friction does not lead to a storage of energy as potential energy; it is lost, mostly as heat
More for this chapter